2914 - XYZ, Boxford, Miyano & Colchester Lathes, Bridgeport, Boxford & Yang Eagle Milling Machines and Toolroom Equipment
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Tamworth and Burntwood. Please see individual lots for loading information. All/Any tooling is being offered as specifically described.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 65
Los 1: XYZ SLX 555 x 1.75m CNC Lathe
XYZ SLX 555 x 1.75m CNC Lathe with Proto Trak SLX Control, Swing Over Bed 560mm, Distance Between Centres 1750mm, Spindle Speeds 30 – 1800rpm (2014)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 1A: Webster & Bennett
Webster & Bennett 42" Table, Extended Height, 46" Swing, Digital Read Out. S/No. 6437-4
Please Note: This lot is located in Burntwood. Unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 2: Boxford T220i CNC Lathe
Boxford T220i CNC Lathe, Swing Over Bed 210mm, X Axis Travel: 150mm, Y Axis Travel 350mm, Distance Between Centres 400mm, Spindle Bore 25mm, Spindle Speeds 200 – 4000rpm, 8 Station Turret. S/No. 11019/1214 (2014)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 3: Miyano BNC-42C3 CNC Lathe
Miyano BNC-42C3 CNC Lathe with Fanuc 21i-T Control, Imenca VIP 70 Bar Feed, X Axis Travel 100mm, Y Axis Travel 185mm, 8 Station Turret, Collet Chuck, Parts Chucker. S/No. BC-30188 (2001)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 4: Colchester Tornado 220m CNC Lathe
Colchester Tornado 220m CNC Lathe with Fanuc 21-TB Control, Driven Tools, Swing Over Bed 510mm, X Axis Travel 235mm, Y Axis Travel 540mm, C Axis 0.001◦, Spindle Bore 77.5mm, Tailstock, Tornado MBF 1000 Short Magazine Bar Feed, Swarf Conveyor. S/No. T40060 (2003) Manuals.
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 5: Colchester Combi 2000 Lathe
Colchester Combi 2000 Lathe with Fanuc 210T Control, 400mm Swing Over Bed, 245mm Swing Over Cross Slide, 585 Swing In Gap, 1250mm Between Centres, 3 Jaw Chuck. S/No. E70003 (1998)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 6: Emco Turn 320 CNC Lathe
Emco Turn 320 CNC Lathe with Siemens Control, 8 Station Turret, Tailstock
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 7: Boxford 300 VMCi Vertical Machining Centre
Boxford 300 VMCi Vertical Machining Centre, X Axis Travel 304mm, Y Axis 157mm, Z Axis 218mm, 8 Station Tool Changer. S/No. 11157/03/16 (2016)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 8: Yang Eagle SMV-600 Vertical Machining Centre
Yang Eagle SMV-600 Vertical Machining Centre with Fanuc O-MD Control, Table Size 750mm x 360mm, X Travel 600mm, Y Travel 410mm, Z Travel 510mm, 20 Station ATC, Manuals. S/No. 200834 (2000)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 9: Bridgeport 800 – 22 Vertical Machining Centre
Bridgeport 800 – 22 Vertical Machining Centre with Heidenhain 370 Control, Table Size 1000mm x 490mm, X Axis Travel 800mm, Y Axis Travel 510mm, Z Axis Travel 500mm, 22 Station Tool Changer. S/No. 820397 (1996)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.