2912 - HAAS, XYZ & Chiron Machining Centres, Bandsaws, Spark Eroders, Drills and other Ancillary Items no longer required
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Birmingham. Please see individual lots for loading information and charges. All/Any tooling is being offered as specifically described.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 62
Los 100: HAAS VF-3YT/50 Vertical Machining Centre
HAAS VF-3YT/50 Vertical Machining Centre with HAAS Control, Table size = 1321 mm x 584 mm, X/Y/Z = 1016/660 (extended) /635mm, Spindle Taper BT-50, Spindle Speed 7500rpm, Automatic Chip Auger, Rigid Tapping, Renishaw Wireless Tool-Setting Probe, 15” LCD Colour Screen, Helical Interpolation, 30-Tool ATC. S/No. 1110608 (02/2014)
Please Note: This lot does not include any Tooling
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £350 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 100A: BT50 Tooling Suitable for Haas VF3YT
BT50 Tooling Suitable for Haas VF3YT (May Need Tool Studs Changing)
Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 100B: XYZ Mini Mill KR MF 560 Vertical Machining Centre
XYZ Mini Mill KR MF 560 Vertical Machining Centre with Siemens Sinumerik 810D Control, Table Size 610mm x 370mm, 20 Station Tool Changer, BT40 Back End Tooling. S/No. MF284 (2007)
Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £300 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.
Los 101: XYZ Mini Mill 560 Vertical Machining Centre
XYZ Mini Mill 560 Vertical Machining Centre with Sinumerik 828D Control, Table Size 610mm x 370mm, 12 Station Tool Changer, BT40 Tooling. S/No. MF383 (01/12)
Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £300 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.
Los 102: XYZ 710 Vertical Machining Centre
XYZ 710 Vertical Machining Centre with Siemens Sinumerik 810D Control, Table Size 800mm x 450mm, 24 Station Tool Changer, BT40 Back End Tooling. S/No. SMT00112 (2007)
Please Note: The Siemens Sinumerik 810D Control is in need of repair or replacement - Replacement board; Part No. 6FC5410-0AY03-1AA0 (CCU3.4)
Please Note: This lot is located in Birmingham. A dismantling, removal of oils & coolants, positioning and securing of all Axis’s, electrical isolation, moving and loading to suitable transport charge of £300 will be automatically added to your invoice should you be successful in purchasing this item. All/Any tooling is being offered as specifically described.
Los 103: Chiron FZ 15W Machining Centre
Chiron FZ 15W Machining Centre with Siemens Control, Twin Table – Table 1 680mm x 400mm, Table 2 680mm x 400mm, 20 Station Toolchanger, Swarf Conveyor, Air Cylinder. S/No. 144-03 (2000)
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 103A: Agie Cut Classic 3 Wire Eroder
Agie Cut Classic 3 Wire Eroder with Agie Vision Control, Working Area 850mm x 550mm, ICS TAE Evo Chiller. S/No. 229 (2000)
Please Note: Control Boards PSC04 & HPS10 are missing. This item is being sold ‘as is’ spares or repairs.
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 103B: Eurospark EZE 2030 Manual ZNC EDM Machine
Eurospark EZE 2030 Manual ZNC EDM Machine with Eruospark EZE Control and Programmable Z Depth, 50 Amp Generator, Work Table Size 600mm × 300mm, Travel X, Y, Z 300mm x 200mm x 200mm, Ram Platen to Work Table 190 ~ 500mm, Max. Electrode Weight 75kg, Max. Workpiece Weight 900kg, Work Tank Size W × D × H 980mm × 550mm × 300mm (2003)
Please Note: This lot is located in Birmingham. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 104: Charmilles Isopulse 25 Spark Eroder
Charmilles Isopulse 25 Spark Eroder, Table size 340mm x 230mm with Heidenhain Dro.
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 104A: Sodick AP3 Model FS-SAP3 Spark Eroder
Sodick AP3 Model FS-SAP3 Spark Eroder with Fine Sodick Mark X EDM Control, Table Size: 600mm x 300mm, Tank Size: 700mm x 500mm x 320mm depth, Homemade Plate: 400mm x 250mm, 3R System. S/No. SAP3 207 (1991)
Please Note: This Machine is not in working order, sold as is for spares and repairs
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.