2821 - CNC Machining Centres & Lathes, Butler Elgamill, Borers, Milling Machines, Grinders and Toolroom Equipment previously used by Cyrus Engineering
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Wales.
Lots 2, 8 & 13 are located in Glamorgan all other lots are located in Swansea. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-6 von 6
Los 7: Sculfort Supercap Senior 750 4000R Gap Bed Centre Lathe
Sculfort Supercap Senior 750 4000R Gap Bed Centre Lathe with Acu-Rite 2-Axis Digital Read Out, 1m 4-Jaw Chuck, Distance between centres 4m, 3-Jaw Steady. S/No. 125753
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 9: Poreba TR115B2/5M Gap Bed Centre Lathe
Poreba TR-115 B2/5M Gap Bed Centre Lathe with Acu-Rite 2-Axis Digital Read Out, 1m 4-Jaw Chuck, 5m Distance between centres, 2 3-Point Steadies. S/No. 7402-01-09031-07
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 10: Poreba TRP 93 x 4m Gap Bed Centre Lathe
Poreba TRP 93 x 4m Gap Bed Centre Lathe with (2) x 3 Point Steady, 400mm Distance between centres, 4-Jaw Chuck 800mm. S/No. 7402-06-07008-00 (1998)
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 11: Tarnow TUJ 50M63 Gap Bed Centre Lathe
Tarnow TUJ 50M63 Gap Bed Centre Lathe with Acu-Rite 2-Axis Digital Read Out, 610mm x 2.7m Bed, 3m Distance between centres, 400mm 3-Jaw Chuck, 400mm 4-Jaw Chuck, 3-Point Steady. S/No. 506 (1998)
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 12: Tarnow Centre Lathe
Tarnow Centre Lathe with Acu-Rite 2-Axis Digital Read Out, 400mm 3-Jaw Chuck, 500mm 4-Jaw Chuck, 350mm 3 Jaw Chuck, 380mm 3 Jaw Chuck, 400mm 4 Jaw Chuck, 500mm 4 Jaw Chuck, 4m Distance between centres, Quick Change Tooling, 2 Point Steady and 3 Point Steady. S/No. not available (1992)
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 13: Colchester Mastiff 1400 Lathe
Colchester Mastiff 1400 Lathe, 12" 3 Jaw Chuck, distance between Centres 5ft, Gap Bed, 16" 4 Jaw chuck, 3 Point Steady, Quick Change Tooling. S/No. 8/0205/05372
Please Note: This lot is located in Glamorgan, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.