2799 - CNC Lathes, Machining Centres, Wire EDMS and Toolroom Equipment no longer required due to the Retirement of the Directors at Pantograph Precision LLP
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lots 78 - 89 are located in Cambridge. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Viewing Date for this Auction is Monday 8th July 2019 between 10am and 3pm only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 98
Los 1: Matsuura MC-660VG High Speed Vertical Milling Machine
Matsuura MC-660VG High Speed Vertical Milling Machine with Yasnac J300 CNC Control, Advanced Zee Lag Control, Table 940 x 460mm, 30 ATC, Through Spindle Coolant. S/No. 010314621 (2001)
Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 1A: 40 International Spindle Tooling
40 International Spindle Tooling, Nikken Balanced Tools with Collets & 3D Edgefinder
Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *: Combination of lots Lot 1 & 1A
Combination of Lots 1 & 1A
Matsuura MC-660VG High Speed Vertical Milling Machine with Yasnac J300 CNC Control, Advanced Zee Lag Control, Table 940 x 460mm, 30 ATC, Through Spindle Coolant. S/No. 010314621 (2001)
and
40 International Spindle Tooling, Nikken Balanced Tools with Collets & 3D Edgefinder
Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
1 | Matsuura MC-660VG High Speed Vertical Milling Machine |
1A | 40 International Spindle Tooling |
Los 2: Charmilles Robofil F400 Wire Cut Machine
Charmilles Robofil F400 Wire Cut Machine. No. 71046. M225, Part Maximum Dimensions: X = 1200 x Y= 760 x Z = 200mm, Part Maximum Weight: 800kg, Work Tank dimension 1260 xy 800mm, Programme Loading via Dell Laptop with TU58 Tape System Emulator, Angle 0-30 degrees, Manual Wire Feed, Some Spares
Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Los 3: Leadwell MCV-550D CNC Milling Machine
Leadwell MCV-550D CNC Milling Machine with Fanuc 10MA Control, Fanuc AC Spindle Motor Model 6, 7.5hp Continuous (10hp 30mins), Table 800mm x 400mm, Movement X - 550mm, Y - 360mm, Z- 510mm, 16 Tool ATC, BT40 Spindle Taper, 2 Speed Gearbox, Low gear 30-1000rpm, high 1000-4000rpm, Machine is Equipped with a full size 200m/m High Sub Table
Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities available on-site, dismantling and Loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 3A: BT40 Spindle Tooling
BT40 Spindle Tooling
Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *: Combination of Lots 3 & 3A
Combination of Lots 3 & 3A
Leadwell MCV-550D CNC Milling Machine with Fanuc 10MA Control, Fanuc AC Spindle Motor Model 6, 7.5hp Continuous (10hp 30mins), Table 800mm x 400mm, Movement X - 550mm, Y - 360mm, Z - 510mm, 16 Tool ATC, BT40 Spindle Taper, 2 Speed Gearbox, Low Gear 30-1000rpm, High 1000-4000rpm, Machine is equipped with a full size 200m/m High Sub Table
and
BT40 Spindle Tooling
Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
3 | Leadwell MCV-550D CNC Milling Machine |
3A | BT40 Spindle Tooling |
Los 4: Sharnoa HPM32 Vertical Machining Centre
Sharnoa HPM32 Vertical Machining Centre plus Faemat High Speed Spindle, Travel X 800mm Y 540mm Z 500mm, ATC 18 Tools, Machine Fitted with:- Heidenhain Positive Air Supply Scales, Faemat FA1 110CUS Side Mounted High Speed Spindle up to 30,000rpm, HSK50 Tooling for High Speed, Additional Faemat Spindle Chiller, Spindle, Main Spindle 5.5kw 60-8000rpm bt 40
Please Note: High Speed Spindle Functioning,Yaskawa Spindle Drive Unit Faulty
Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Los 5: Jones & Shipman 1302 EIU 2 Cylindrical and Internal Grinder
Jones & Shipman 1302 EIU 2 Cylindrical and Internal Grinder, Maximum Swing 14” x 27" between Centres, Steadies, 3-Point and 2-Point, Mag chuck, 3 Jaw Chuck, Radius Dresser, Faceplate, Coolant, Wheel Arbours
Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Los 6: Jones and Shipman Model 1011 Grinder
Jones and Shipman Model 1011 Grinder, 27" x 10" Capacity, Mag Chuck, Coolant, 5.5hp, 10" Grinding 2 Wheel, Weight 2700kgs,
Please Note: This lot is located in Maidenhead. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.