2726 - Phase 1 - Large Capacity Boring Mills, Horizontal and Vertical Turning Lathes, Toolroom and Fabrication Equipment surplus to the ongoing requirements of Howden CKD Compressors s.r.o.
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
NEW LOT ADDED TO THIS AUCTION
Location: These lots are located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18.00%.
VAT
Stawka VAT wynosi 21.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Czech Republic export conditions and the obtaining of any applicable Export Licences
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 71-80 z 152
Przedmiot 19F: Skoda Right Angle Milling Head
Skoda Right Angle Milling Head
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination Lots 19 - 19F
Combination Lots 19 - 19F
19 Skoda Type WD160 Horizontal Floor Borer, Rail size Approx. 6m. S/No. ob17205
Further Technical Information to be added soon
19A Powered Rotary Table, 2m x 2.5m
19B Skoda Outer Steady
19C T-Slotted Floor Plate 5m x 3m
19D T-Slotted Floor Plate 5m x 3m
19E T-Slotted Floor Plate 5m x 3m
19F Skoda Right Angle Milling Head
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 20: Tos Kurim FRPD16X30 4-Head Plano Mill
Tos Kurim FRPD16X30 4-Head Plano Mill, Table size: 6m x 1.6m. S/No. 39920
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 21: MAS VRP84A Travelling Column Radial Drill
MAS VRP84A Travelling Column Radial Drill, Throat size: 4m, Bedsize: 7m. S/No. 159230002
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 21A: T-Slotted Floor Plates 3m x 5m
T-Slotted Floor Plates 3m x 5m
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of lots 21 & 21A
Combination of lots 21 & 21A
21 MAS VRP84A Travelling Column Radial Drill, Throat size: 4m, Bedsize: 7m. S/No. 159230002
21A 3m x 5m Machine Table
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
21 | MAS VRP84A Travelling Column Radial Drill |
21A | T-Slotted Floor Plates 3m x 5m |
Przedmiot 21B: Skoda Powered Rotary Table
Skoda Powered Rotary Table 2m x 2m. S/No. 0b18766 (1966)
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 21C: Rotary Table
Rotary Table 1670mm
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 21D: (4) Powered Steady's for Borers
(4) Powered Steady's for Borers, Model J1X18. S/No. 2-81-971-0232 (1979)
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 22: ZDAS CDN 400 Straightening Press
ZDAS CDN 400-C3 Straightening Press, Bed Size: 9m x 3m Wide. S/No. 2436/87 (1987)
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.