2726 - Phase 1 - Large Capacity Boring Mills, Horizontal and Vertical Turning Lathes, Toolroom and Fabrication Equipment surplus to the ongoing requirements of Howden CKD Compressors s.r.o.
We współpracy z
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
NEW LOT ADDED TO THIS AUCTION
Location: These lots are located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18.00%.
VAT
Stawka VAT wynosi 21.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Czech Republic export conditions and the obtaining of any applicable Export Licences
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 101-110 z 152
Przedmiot 40: Hydraulic 4-Pillar Press
Hydraulic 4-Pillar Press, Table Size 160mm x 175mm
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 41: Small Hydraulic Press
Small Hydraulic Press, Table Size 630mm
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 42: Chopsaw
Chopsaw, Blade Saw 220mm
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 43: MAS VR4A Radial Drill
MAS VR4A Radial Drill, 1.4m Box Table 1m x 750mm x 500mm
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 44: Hydraulic Press
Hydraulic Press, Table Size 600mm x 560mm
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 45: MAS VRM 50A Portable Radial Drill
MAS VRM 50A Portable Radial Drill (1962)
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 46: TOS SN55-71 Centre Lathe
TOS SN55-71 Centre Lathe, 2m Distance between centres, 310mm 4-Jaw Chuck, 3-Jaw Steady. S/No. 250620124
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 47: TOS SUS63 Lathe
TOS SUS63 Lathe, Distance between centres 1.4m, 4-Jaw Chuck 310mm, 3-Jaw Chuck 310mm, 3-Point Steady. S/No. 0440704
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 48: TOS SU50 Lathe
TOS SU50 Lathe, 1.6m Distance between centres, 310mm 3-Jaw Chuck. S/No. 21205421
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 50: TOS FA5B Vertical Mill
TOS FA5B Vertical Mill, Table Size 2m x 450mm. S/No. 1167 95 40324
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.