2726 - Phase 1 - Large Capacity Boring Mills, Horizontal and Vertical Turning Lathes, Toolroom and Fabrication Equipment surplus to the ongoing requirements of Howden CKD Compressors s.r.o.
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
NEW LOT ADDED TO THIS AUCTION
Location: These lots are located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 18.00%.
VAT
Stawka VAT wynosi 21.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Czech Republic export conditions and the obtaining of any applicable Export Licences
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 11-20 z 152
Przedmiot *: Combination of Lots 4 & 4A
Combination of Lots 4 & 4A
4 Tos Hulin SK1Q 16CNCB Vertical Turret Lathe, Chuck size 1.6m. S/No. 2212047 (1981)
Please Note: This Item is a late release item - March 2019
and
4A Cupboard with Tooling
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
4 | Tos Hulin SK1Q 16CNCB Vertical Turret Lathe |
4A | Cupboard with Tooling |
Przedmiot 5: Tos Hulin SKQ12 NC Vertical Turret Lathe
Tos Hulin SKQ12 NC Vertical Turret Lathe, Chuck Size: 1250mm. S/No. 2212042
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 5A: Cupboard with Tooling
Cupboard with Tooling
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of Lots 5 & 5A
5 Tos Hulin SKQ12 NC Vertical Turret Lathe, Chuck Size: 1250mm. S/No. 2212042
and
5A Cupboard with Tooling
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
5 | Tos Hulin SKQ12 NC Vertical Turret Lathe |
5A | Cupboard with Tooling |
Przedmiot 6: CKD Blansko 50E Twin Column Ram Type Vertical Turning Lathe
CKD Blansko SK50E Twin Column Ram Type Vertical Turning Lathe, Table Diameter 4770mm, Max Turning Diameter 6300mm, Max Turning Height 4220mm with Side Head & Segmented Grinding Head and Copying, Machine Weight 136,000kgs. S/No. 50101-27 (1974)
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 7: CKD Blansko Type 4000 Twin Column Ram Type Vertical Turning Lathe
CKD Blansko Type SK40 Twin Column Ram Type Vertical Turning Lathe with Side Head & Segmented Grinding Head, Copying, Chuck dia 3770mm, Max Turning Diameter 4000mm, Max Turning Height 2500mm, Machine Weight 108,000kgs. S/No. 40034-9 (1959)
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 8: Chuck Jaws with Riser Plates for CKD Blansko VTL
Chuck Jaws with Riser Plates for CKD Blansko VTL
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 8A: Chuck Jaws with Riser Plates for CKD Blansko VTL
Chuck Jaws with Riser Plates for CKD Blansko VTL
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 8B: Chuck Jaws with Riser Plates for CKD Blansko VTL
Chuck Jaws with Riser Plates for CKD Blansko VTL
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of Lots 8 - 8B
Combination of Lots 8 - 8B
(3) Lots of Chuck Jaws with Riser Plates for CKD Blansko VTL
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
8 | Chuck Jaws with Riser Plates for CKD Blansko VTL |
8A | Chuck Jaws with Riser Plates for CKD Blansko VTL |
8B | Chuck Jaws with Riser Plates for CKD Blansko VTL |