2709 - Large Capacity CNC Lathes & Borers previously used in the Oil & Gas Industry
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Newbridge, Midlothian. Unfortunately there are no loading facilities on site. Dismantling and loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-4 von 4
Los 1: YOU-JI YV-1600 ATC CNC Vertical Lathe
YOU-JI YV-1600 ATC CNC Vertical Lathe with Fanuc 18T Control, Table Dia: 1600mm, Max Swing: 2000mm, Max Turning Dia: 1800mm, Max Under Tool: 1200mm, Table Speeds: 1-250 RPM (2003)
Please Note: This lot is located in Newbridge, Midlothian, unfortunately there are no loading facilities on site. Dismantling and loading will be at the cost of the purchaser.
Los 2: Hankook Protec 13ND CNC Oil Country Hollow Spindle Lathe
Hankook Protec 13ND CNC Oil Country Hollow Spindle Lathe with Fanuc 21i TB Control, Spindle Bore 330mm, Max Swing Over Bed 1300mm, Max Swing Over Cross Slide 940mm, Distance Between Centres 5000mm, Spindle Speeds 2-600 RPM, Boring Bar Clamp, (1) Boring Bar 150mm x 1500mm Boring Length, (1) Boring Bar 100mm x 800mm Boring Length, (3) Fixed Steadies, Double Chucks, 4 Way Indexing Toolpost (2009)
Please Note: This lot is located in Newbridge, Midlothian, unfortunately there are no loading facilities on site. Dismantling and loading will be at the cost of the purchaser.
Los 3: Takang VS35X x 2200 CNC Hollow Spindle Oil Country Lathe
Takang VS35X x 2200 CNC Hollow Spindle Oil Country Lathe with Fanuc 18T Control, Spindle Bore 320mm, Max Swing 900mm, Distance Between Centres 2200mm, 8 Station Turret, Programmable Tailstock, 3 Point Steady, Swarf Conveyor, 820mm 4 Jaw Chuck (2003)
Please Note: This lot is located in Newbridge, Midlothian, unfortunately there are no loading facilities on site. Dismantling and loading will be at the cost of the purchaser.
Los 4: Victor V Turn 36 CNC Slant Bed Lathe
Victor V Turn 36 CNC Slant Bed Lathe, Swing Over Bed 680mm, Swing Over Cross Slide 475mm, Distance Between Centres 1250mm, Spindle Bore 105mm, Spindle Speed 9-2000rpm, Machine width 380mm, Swarf Conveyor
Please Note: This lot is located in Newbridge, Midlothian, unfortunately there are no loading facilities on site. Dismantling and loading will be at the cost of the purchaser.