2591 - High Quality CNC Doosan Vertical Machining Centres & Lathes and Conventional Toolroom Equipment previously used by George Taylor (Engineering) Ltd
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These Lots are located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Please click here to view a brochure for this auction
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer on Wednesday 7th June 2017.
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Gesonderte Bedingungen
Lose 1-10 von 49
Los 100: Daewoo Mynx DNM500ii CNC Vertical Machining Centre
Daewoo Mynx DNM500ii CNC Vertical Machining Centre with Fanuc i Series Control, Table Size: 1200mm x 540mm, Power on Time Hours: 4,269, Running Hours: 1,455, Cutting Hours: 1,376, 30ATC. S/No. 2447 (2014) (6) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
View photos for a copy of the original Purchase Invoice.
Los 100A: Rack of BT40 Tooling & Collets
Rack of BT40 Tooling & Collets (Suitable for Doosan DNM 500 II)
Please Note: This Item is located in Airdrie, Scotland.
Unfortunately there are no loading facilities available on site.
Dismantling & Loading will be at the cost of the purchaser.
Los 100B: Collect chuck with Collets
Collect chuck with Collets (Suitable for Daewoo Machining Centers)
Please Note: This Item is located in Airdrie, Scotland.
Unfortunately there are no loading facilities available on site.
Dismantling & Loading will be at the cost of the purchaser.
Los 101: Daewoo Mynx DNM 650 CNC Vertical Machining Centre
Daewoo Mynx DNM 650 CNC Vertical Machining Centre with Fanuc i Series Control, Table Size: 1300mm x 670mm, Chiller & Swarf Conveyor, Power on Time Hours: 14,482, Running Hours: 6,122, Cutting Hours: 5,252, 30ATC. S/No. 65 (03/2009) (8) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 101A: Rack of BT40 Tooling & Collets
Rack of BT40 Tooling & Collets (Suitable for Doosan DNM 650)
Please Note: This Item is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 102: Daewoo Mynx NM410 CNC Vertical Machining Centre
Daewoo Mynx NM410 CNC Vertical Machining Centre with Fanuc OI-MC Control, Table Size: 762mm x 410mm, Swarf Conveyor & Cooljet, Power on Time Hours: 17,521, Running Hours: 3,382, Cutting Hours: 4,447, 24ATC. S/No. 476 (2006) (6) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
View photos for a copy of the original Purchase Invoice.
Los 102A: Rack of BT40 Tooling & Collets
Rack of BT40 Tooling & Collets (Suitable for Daewoo Mynx 540)
Please Note: This Item is located in Airdrie, Scotland.
Unfortunately there are no loading facilities available on site.
Dismantling & Loading will be at the cost of the purchaser.
Los 103: Daewoo Mynx 540 CNC Vertical Machining Centre
Daewoo Mynx 540 CNC Vertical Machining Centre with Fanuc 21MB Control, Table Size: 1200mm x 500mm, Swarf Conveyor, Cooljet, Power on Time Hours: 21,980, Running Hours: 7,452, Cutting Hours: 6,777, 30ATC. S/No. 1986 (09/2004) (6) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 103A: Rack of BT40 Tooling & Collets
Rack of BT40 Tooling & Collets (Suitable for Daewoo Mynx 540)
Please Note: This Item is located in Airdrie, Scotland.
Unfortunately there are no loading facilities available on site.
Dismantling & Loading will be at the cost of the purchaser.
Los 104: Daewoo Puma 400B CNC Lathe
Daewoo Puma 400B CNC Lathe with Fanuc 32i Control, Swing over Bed: 700mm, Swing over Saddle: 480mm, 1079mm between Centres, Tooleye & Swarf Conveyor, Power on Time Hours: 8,317, Running Hours: 4,361, Cutting Hours: 3,267, 10 Station Turret. S/No. 4449 (2011) (9) Tools
Please Note: This lot is located in Airdrie, Scotland. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.