2585 - Doosan Lathe and Vertical Machining Centre's surplus to requirements at James Brown Industries
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These Lots are located in Cwmbran, Wales. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer.
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-3 von 3
Los 1: Doosan Puma 2600M 3 Axis Lathe
Doosan Puma 2600M 3 Axis Lathe with Doosan-Fanuc I Control, Maximum Spindle Speeds Main 3500rpm, Milling speed 5000rpm, Axis travels X=260mm Z=830mm C=360 degrees (0.001), Rapid feed rates X/Z=30m/min, 12/24, Station Turret (half indexing), Distance between centre’s 800mm, 76mm spindle Bore, Programable Tailstock., 3 Jaw Chuck (to be fitted), Tool Presetter, Parts Catcher, Swarf Conveyor, Machine has (2) x Driven Tools and (2) Z Driven Tools, Set of Manuals. S/No. ML0103-000377 (2012)
Please Note: This lot is located in Cwmbran, Wales. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 2: Doosan VC510 3 Axis Twin Pallet Vertical Machining Centre
Doosan VC510 3 Axis Twin Pallet Vertical Machining Centre, Maximum Spindle Speed 10000rpm, BT40 Spindle Taper, Axis Travels X=762mm, Y=516mm, Z=570mm, (Note X=764mm Y=519mm Z=573mm set in parameters), Rapid Feed Rates X/Y=40m/min Z=32 m/min, 30 Station ATC, Table Dimensions 860mm x 570mm, Load per Pallet 350kg, Swarf Conveyor, Through Spindle Coolant, Spindle Oil Chiller. S/No. MNV0061-000074 (02/2012)
Please Note: Tooling and Fixtures are not included in this lot.
Please Note: This lot is located in Cwmbran, Wales. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 3: Doosan VC510 3 Axis Twin Pallet Vertical Machining Centre
Doosan VC510 3 Axis Twin Pallet Vertical Machining Centre, Maximum Spindle Speed 10000rpm, BT40 Spindle Taper, Axis Travels X=762mm, Y=516mm, Z=570mm, (Note X=764mm Y=518mm Z=579mm set in parameters), Rapid Feed Rates X/Y=40m/min Z=32 m/min, 30 Station ATC, Table Dimensions 860mm x 570mm, Load per Pallet 350kg, Swarf Conveyor, Through Spindle Coolant, Spindle Oil Chiller. S/No. V0026-000018 (07/2011)
Please Note: Tooling and Fixtures are not included in this lot.
Please Note: This lot is located in Cwmbran, Wales. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.