Lotto 7: Citizen Series 2 L20-VIII LFV CNC Sliding Headstock CNC Turning Centre

Citizen Series 2 L20-VIII LFV CNC Sliding Headstock CNC Turning Centre, Model L20E 2M8 with CINCOM System M70LPC-VU Control, Oversize 25mm Bar Capacity, Max Machining Length 200mm, Featuring Low Frequency Vibration Technology: LFV Creates the advantage of aiding the production of small chips by finely fragmenting the swarf generated and eliminating the possibility of in-cut interference from stringy materials and especially when ‘ birds-nesting’ is occurring. LFV Technology also enables an increase in depth-of-cut and can improve surface quality even on very small diameters or very thin-walled components, Switchable between Guide Bush mode or Non-guide Bush mode, Main Spindle Collet Sleeve dia 25mm, Max 10000rpm, motor 2.2/3.7 kW, Sub Spindle Collet Sleeve dia 25mm, Max 10000rpm, Motor 0.75/2.2 kW, 5 Gang Turning Tools,  4 Rotary Tools, + 3 Single Ended Spindles Manually Adjustable from 0 to 90 Degrees, Back Tool Post  4 Fixed tools, 3 Fixed Tools on the Opposite Tool Post, Parts Catcher, Parts Conveyor, Part Off Tool Breakage Detection – Probe Type, Cutting oil Level Detection, Coolblaster High Pressure Coolant System, Absolent A Mist 10 Fume Extractor, Nobel 250ME Fire Suppression System, Special NC Functions: User Macro, Synch Rotation of Main and Sub Spindle, Canned Cycle for Drilling, Tool Nose Radius Compensation Function, Main Spindle 1 Degree Indexing, Sub Spindle 1 Degree Indexing, Network I/O Function, Main Spindle C Axis Control, Sub Spindle C Axis Control, Geometric Function, Constant Surface Speed Control for Main and Sub Spindles, Multi Repetitive Cycle, B Code Function, Corner Chamfer and Radius, Spindle Speed Fluctuation Detection, Milling Interpolation, Synchronous Tapping Function, Continuous Threading Cycle, Helical Compensation Function, Sub Spindle Threading Function, Rigid Tapping Function to Main and Sub Spindles, Rotary Tool – Rigid Tapping Function,  Offset – 80 Sets, Cromar Type A Swarf Conveyor & Iemca Boss 338-32 HD Superfast Combo Automatic Bar Feeder. S/No. QF6174 (10/2017 - Installed 03/2018)

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.