Qty Tooling Suitable for Miyano BNJ 51 Machine

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as photographed. Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer

Qty Tooling Suitable for Miyano BNJ 51 Machine

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as photographed. Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer

Combination of Lots 2, 2A & 2B

Lot 2 - Miyano BNJ-51SY2 7-Axis Twin Spindle CNC Turning Centre with Fanuc 32i-A Control, Twin Spindle, Twin Turret and Y axis, 51mm Bar Capacity on Left Spindle, 42mm Capacity on Right Spindle, Max Turning Length 100mm, Main Spindle max 5000rpm, Motor 7.5/11kW, Right Spindle max 7000rpm, Motor 3.7/5.5kw, Right Spindle Slide Travel X2 axis 70mm, Z2 axis 525mm, 12 Station Main Turret – Slide Travel X1 165mm, Z1 246mm, Y1 ±40mm, (Main Turret has all 12 Stations/Tools Driven) Tool Speed Range to 4000rpm, 6 Station Segmental Back Working Turret, Parts Catcher, Parts Conveyor, Swarf Conveyor, Iemca Kid 80 Type 16 Short 1m Automatic Bar Feeder. S/No. BN96020Y (02/2008)

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Lot 2A - Qty Tooling Suitable for Miyano BNJ 51 Machine

Lot 2B - Qty Tooling Suitable for Miyano BNJ 51 Machine

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as photographed. Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer.

Miyano BNJ-51SY6 7-Axis Turning Centre with Fanuc 0i-TF Control, Twin Spindle, Twin Turret with Y axis on Main Turret, Renishaw Tool Setter, Hand Controller, Parts Catcher, Parts Conveyor, NovaXess Swarf Conveyor, Cleanmist CM 500 Unit, Stat X Automatic Fire Suppression System, Maximum Work dia  51mm, Max Work Length 100mm, Spindle 1: 6” Thru-hole Chuck, 15/11kw Speeds to 5000rpm, Spindle 2: 5” Thru-hole Chuck 7.5/5.5kw Speeds to 5000rpm, Turret 1: 12 Station Turret each with 12 Driven Stations to 6000rpm, Turret 2: 8 Station Turret with 4 Driven Stations to 3000rpm with Various Turret Toolholders and Radial and Axial Driven Tools, Iemca Boss 552 HD type 21L 1m Short Magazine Bar Loader. S/No. DV5Y0024 (10/2015)

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as photographed. Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Citizen Cincom L32 -X 8 Axis CNC Sliding Headstock Turning Centre, Model L32 1M10 with CINCOM System M70LPC-VU Control, Oversize 38mm Bar capacity, Max Machining Length: 320mm, Switchable between Guide Bush Mode or Non-guide Bush Mode, Main Spindle Collet Sleeve dia 38mm, max 8000rpm, motor 3.7/7.5kw, Sub Spindle Collet Sleeve dia 38mm, max 8000rpm, motor 2.2/3.7 kW, Parts Catcher, Parts Conveyor, Part Off Tool Breakage Detection – Probe Type, Cutting Oil Level Detection, Hydra Jet CM 20 2000 6 High Pressure Coolant Sytem, Absolent A Mist 20S Fume Exractor, Stat X Automatic Fie Extinguisher, Special NC functions: User Macro, Synch Rotation of Main and Sub Spindle, Canned Cycle for Drilling, Tool Nose Radius Compensation Function, Main Spindle 1 Degree Indexing, Sub Spindle 1 Degree Indexing, Network I/O Function, Main Spindle C Axis Control, Sub Spindle C Axis Control, Geometric Function, Constant Surface Speed Control for Main and Sub Spindles, Multi Repetitive Cycle, B Code Function, Compound Fixed Cycles, Corner Chamfer and Radius, Spindle Speed Fluctuation Detection, Milling Interpolation, Synchronous Tapping Function, Continuous Threading Cycle, Helical Compensation Function, Rigid Tapping Function to Main and Sub Spindles, Rotary Tool – Tapping Function, Cromar Type A Swarf Conveyor & IEMCA Boss 338 HD/R Type 32 LL Bar Feeder. S/No. V30346 (2016) Made in Japan

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as photographed. Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

4 x GSC1110 Rotary Tools, 4 x SAU825 Sub-Spindle Tool Holders, 1 x GDF1207 Static Tool Holder, 1 x GSE1910 Drilling/Milling Head, 9 x Assorted Tool Sleeves

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as photographed. Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer

Adaptive Guide Bush Kit Suitable for Citizen L32-X

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as photographed. Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer

LNS Swarf Conveyor Suitable for Citizen L32-X

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as photographed. Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer

Combination of lots 4, 4A, 4B, 4C

Lot 4 - Citizen Cincom L32 -X 8 Axis CNC Sliding Headstock Turning Centre, Model L32 1M10 with CINCOM System M70LPC-VU Control, Oversize 38mm Bar capacity, Max Machining Length: 320mm, Switchable between Guide Bush Mode or Non-guide Bush Mode, Main Spindle Collet Sleeve dia 38mm, max 8000rpm, motor 3.7/7.5kw, Sub Spindle Collet Sleeve dia 38mm, max 8000rpm, motor 2.2/3.7 kW, Parts Catcher, Parts Conveyor, Part Off Tool Breakage Detection – Probe Type, Cutting Oil Level Detection, Hydra Jet CM 20 2000 6 High Pressure Coolant Sytem, Absolent A Mist 20S Fume Exractor, Stat X Automatic Fie Extinguisher, Special NC functions: User Macro, Synch Rotation of Main and Sub Spindle, Canned Cycle for Drilling, Tool Nose Radius Compensation Function, Main Spindle 1 Degree Indexing, Sub Spindle 1 Degree Indexing, Network I/O Function, Main Spindle C Axis Control, Sub Spindle C Axis Control, Geometric Function, Constant Surface Speed Control for Main and Sub Spindles, Multi Repetitive Cycle, B Code Function, Compound Fixed Cycles, Corner Chamfer and Radius, Spindle Speed Fluctuation Detection, Milling Interpolation, Synchronous Tapping Function, Continuous Threading Cycle, Helical Compensation Function, Rigid Tapping Function to Main and Sub Spindles, Rotary Tool – Tapping Function, Cromar Type A Swarf Conveyor & IEMCA Boss 338 HD/R Type 32 LL Bar Feeder. S/No. V30346 (2016) Made in Japan

Lot 4A - 4 x GSC1110 Rotary Tools, 4 x SAU825 Sub-Spindle Tool Holders, 1 x GDF1207 Static Tool Holder, 1 x GSE1910 Drilling/Milling Head, 9 x Assorted Tool Sleeves

Lot 4B - Adaptive Guide Bush Kit Suitable for Citizen L32-X

Lot 4C - LNS Swarf Conveyor Suitable for Citizen L32-X

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as photographed. Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Citizen A32 -VIIPL CNC 7-Axis Sliding Headstock CNC Turning Centre, Model A32-  2M7P with CINCOM System Control, 32mm Bar Capacity, Max Machining Length 320mm, Main Spindle Collet Sleeve dia 32mm, Max 8000rpm, Motor 5.5/7.5 kW, Sub Spindle Collet Sleeve dia 32mm, Max 8000rpm, Motor 2.2/3.7 kW, Parts Catcher, Parts Conveyor, Part Off Tool Breakage Detection – Probe Type, Cutting Oil Level Detection, Hydrajet CM 2000-6 High Pressure Coolant System, Absolent A Mist 20 Fume Extractor, Stat X Automatic Fire Extinguisher, Special NC Functions: User Macro, Synch Rotation of Main and Sub Spindle, Canned Cycle for Drilling, Tool Nose Radius Compensation Function, Main Spindle 1 Degree Indexing, Sub Spindle 1 Degree Indexing, Network I/O Function, Main Spindle C Axis Control, Sub Spindle C Axis Control, Geometric Function, Constant Surface Speed Control for Main and Sub Spindles, Multi Repetitive Cycle, B Code Function, Compound Fixed Cycles, Corner Chamfer and Radius, Spindle Speed Fluctuation Detection, Milling Interpolation, Synchronous Tapping Function, Continuous Threading Cycle, Helical Compensation Function, Sub Spindle Threading Function, Rigid Tapping Function to Main and Sub Spindles, Rotary Tool – Rigid Tapping Function. LNS Turbo MH500 Swarf Conveyor & Iemca Boss 332 e/R/ Automatic Bar Feeder. S/No. V25147(04/2014)

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as photographed. Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.