2888A - Office Furniture Manufacturing Machinery, Woodworking, Powder Coating Plant and Ancillaries formerly used by Ernest Gill & Son available due to Family Retirement
Woodworking
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These items are located in Halifax. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 11-20 von 188
Los 204: Model e-Jet 2 Manual Powder Coating Gun
Model e-Jet 2 Manual Powder Coating Gun
Please Note: This lot is located in Halifax. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Los 205: Eurotec GCU400 Manual Powder Coating Gun
Eurotec GCU400 Manual Powder Coating Gun
Please Note: This lot is located in Halifax. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Los 206: Eurotec GCU400 400D Manual Powder Coating Gun
Eurotec GCU400 400D Manual Powder Coating Gun. S/No. 5009002
Please Note: This lot is located in Halifax. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Los 207: Gabbianimacchine Model A10 Angle Plant Automated Post Forming Saw
Gabbianimacchine Model A10 Angle Plant Automated Post Forming Saw, Width of Cross Cut: 1600mm, 3.8m Length Board, 1.8m width, Capacity: 2.5-Ton. S/No. 00103400 (1987)
Please Note: This lot is located in Halifax. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Los 208: Magic EM1.A Saw
Magic EM1.A Saw with Mectron P72 Control. S/No. D172 (1999)
Please Note: This lot is located in Halifax. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Los 209: Morbidelli Author 600K Router
Morbidelli Author 600K Router, Model A 600K with Kvara ESA Control, Table Size: 3m x 1.25m, 10-Station Toolchanger, Pressure Mat & Vacuum Table. S/No. AL4735 (1999)
Please Note: This lot is located in Halifax. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Los 210: Homag BAZ 20/30/16/V/K Router
Homag BAZ 20/30/16/V/K Router with Homatic Control, Pressure Mat, Vacuum Table, Table Size: 6.4m x 1.7m. S/No. 0-201-11-4197 (1998)
Please Note: This lot is located in Halifax. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Los 211: Homag BAZ 10/50/14 Router
Homag BAZ 10/50/14 Router with Pressure Mat, 40-Station Toolchanger, Table Size: 5m x 1.5m. S/No. 0-201-01-0906 (1995)
Please Note: This lot is located in Halifax. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 211A: Ligmatech ZPS50 Gantry Lift System
Ligmatech ZPS50 Gantry Lift System, Width between columns: 8.1m, Height: 3m with Conveyor System. S/No. 0-304-09-3005 (1997)
Please Note: This lot is located in Halifax. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *: Combination of Lots 211 & 211A
Combination of Lots 211 & 211A
Lot 211 - Homag BAZ 10/50/14 Router with Pressure Mat, 40-Station Toolchanger, Table Size: 5m x 1.5m. S/No. 0-201-01-0906 (1995)
Lot 211A - Ligmatech ZPS50 Gantry Lift System, Width between columns: 8.1m, Height: 3m with Conveyor System. S/No. 0-304-09-3005 (1997)
Please Note: This lot is located in Halifax. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
211 | Homag BAZ 10/50/14 Router |
211A | Ligmatech ZPS50 Gantry Lift System |