2821 - CNC Machining Centres & Lathes, Butler Elgamill, Borers, Milling Machines, Grinders and Toolroom Equipment previously used by Cyrus Engineering
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Wales.
Lots 2, 8 & 13 are located in Glamorgan all other lots are located in Swansea. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 31-40 von 95
Los 31: Citoarc Multi 706 Mig Welder
Citoarc Multi 706 Mig Welder. S/No. 98898
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 32: Midsaw Vertical Bandsaw
Midsaw Vertical Bandsaw, Table Size 18'' x 18'', Throat Size 16'', Blade Welder. S/No. E5754
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 34: Finney Type P3/G 3m Horizontal Hydraulic Press
Finney Type P3/G 3m Horizontal Hydraulic Press, 500 Ton. /No. 10240
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 35: Churchill 571B Garage Press
Churchill 571B Garage Press, 1m between Columns, Depth 1.2m, Width 330mm. S/No. 2124
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 36: Mackey Bowley Hydraulic Press
Mackey Bowley Hydraulic Press, Table Size 600mm x 300mm, Depth 450mm. S/No. 58309/85
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 37: IRD Balancer
IRD Balancer, Stand with Model 290 Series III Control System, 5m in Length (excluding Control)
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 38: ITP Model Victor Measuring Table
ITP Model Victor Measuring Table, Table Size 4ft x 8ft 3'', Computer. S/No. 002416 (2001)
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 39: Machine Linisher
Machine Linisher, Suitable for Lathe
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 40: Machine Linisher
Machine Linisher, Suitable for Lathe
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Los 41: Clarke 8'' Bench Grinder
Clarke 8'' Bench Grinder
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.