2763 - CNC Bedmills, Lathes, General Workshop Equipment and Ancillaries no longer required by Torneria Meccanica Raimondi Pierangelo, Italy
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 22.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +39 0732 677 063 or email us at: info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 129
Los 1: MTE BF-2700 CNC Bedmill
MTE BF-2700 CNC Bedmill, Model with Heidenhain ITNC 530 Control, Table Size 1000mm x 2685mm, 24-Station Tool Changer, Swarf Conveyor. S/No. 0524598 (2004)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 1A: Qty CAT50 Tooling suitable for Fresatrice A Banco Fisso CNC Bedmill with Collets
Qty CAT50 Tooling suitable for Fresatrice A Banco Fisso CNC Bedmill with Collets
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 1B: Quick Change Tapping Attachment Suitable for Fresatrice A Banco Fisso CNC Bedmill
Quick Change Tapping Attachment Suitable for Fresatrice A Banco Fisso CNC Bedmill
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *: Combination of Lots 1, 1A & 1B
Combination of Lots 1, 1A & 1B
Fresatrice A Banco Fisso CNC Bedmill, Model MTE BF-2700 with Heidenhain ITNC 530 Control, Table Size 1000mm x 2685mm, 24-Station Tool Changer, Swarf Conveyor
Qty CAT50 Tooling suitable for Fresatrice A Banco Fisso CNC Bedmill with Collets
Quick Change Tapping Attachment Suitable for Fresatrice A Banco Fisso CNC Bedmill
Please Note: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 4: Awea Model AW4567/03 Vertical Machining Centre
Awea Model AW4567/03 Vertical Machining Centre with Fanuc Series 18i-MB Control, 24-Station Tool Changer, Table Size 1250mm x 610mm (2003)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 5: Supermax Twin Pallet Model YCM V85A Vertical Machining Centre
Supermax Twin Pallet Model YCM V85A Vertical Machining Centre with Mitsubishi Series 500 Control, 24-Station Tool Changer, Pallet Size 950mm x 400mm. S/No. 809844 (1998)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 5A: Qty of CAT40 Tooling and Collets
Qty of CAT40 Tooling and Collets (Suitable for Supermax VMC)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 5B: Cupboard with CAT40 Tooling
Cupboard with CAT40 Tooling and Cutters and Electrical Components
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 5C: Tapping Attachment
Tapping Attachment
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *: Combination of Lot 5, 5A, 5B & 5C
Combination of Lot 5, 5A, 5B & 5C
Supermax Twin Pallet Model YCM V85A Vertical Machining Centre with Mitsubishi Series 500 Control, 24-Station Tool Changer, Pallet Size 950mm x 400mm. S/No. 809844 (1998)
Qty of CAT40 Tooling and Collets (Suitable for Supermax VMC)
Cupboard with CAT40 Tooling and Cutters and Electrical Components
Tapping Attachment
Please Note: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
5 | Supermax Twin Pallet Model YCM V85A Vertical Machining Centre |
5A | Qty of CAT40 Tooling and Collets |
5B | Cupboard with CAT40 Tooling |
5C | Tapping Attachment |