3074 - Dahlih, Mazak & Matsuura Machining Centres, Gildemeister, XYZ & Colchester Lathes and Other Toolroom Machinery No Longer Required

Engineering

L'enchère s'est terminée le

mercredi 19 janv. 2022 at 03:00PM (GMT)

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: These lots are located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

21 janv. 2022 at 17:00 (GMT)

'Date limite d''apurement'

3 févr. 2022 at 17:00 (GMT)

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 1-10 de 30

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
19 janv. 2022 16:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
23
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 1: Dahlih MVC 720 Vertical Machining Centre

Dahlih MVC 720 Vertical Machining Centre with Fanuc OI-MD Control, Table size: 950mm x 560mm, Longitudinal Traverse: X Axis - 720mm, Cross Traverse: Y Axis = 460mm, Vertical Traverse: Z Axis = 510mm, Speeds: Up to 8000rpm, Feed Rate: Variable, Spindle Taper: BT40, Automatic Tool Changer, Number of Tools: 30 (2012). Country of Origin: Taiwan

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your ...

Preview image
Fin:
19 janv. 2022 15:40:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
14
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 2: Gildemeister CTX 400 S2 Lathe

Gildemeister CTX 400 S2 Lathe, Swing-Ø Over Bed Rail, Cover 570mm, Swing-Ø Over Plan Guide Cover 420mm, X-Axis 220mm, Z-Axis 635mm, Spindle Head Ø 170mm H5, Spindle Head Ø in Front Bearing 120mm, Spindle Bore 79mm, Chuck Ø 200 / 250mm, Speed Range 25 – 5.000rpm, Rapid Traverse X = 20m/min, Rapid Traverse Z = 24m/min, Universal Disc Turret Autom, Switching with Directional Logic (2000), Number of Tool Stations: 12. Country of Origin: Germany

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing ...

Preview image
Fin:
19 janv. 2022 16:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
41
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 3: Mazak Nexus 510C Vertical Machining Centre

Mazak Nexus 510C Vertical Machining Centre with Mazatrol 640M CNC Control, Axis X: 1049.0mm, Axis Y: 528.0mm, Axis Z: 528.0mm, Rotary Table (4th Axis), Table Length: 1300.0mm, Table width: 550.0mm, Number of Tool Pockets: 30.0, Spindle Taper: CAT 40, Max. Spindle Speed: 12000rpm (2005). Country of Origin: Japan

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods ...

Preview image
Fin:
19 janv. 2022 16:30:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
22
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 4: XYZ Proturn VL 355 Lathe

XYZ Proturn VL 355 Lathe, 355mm Swing Over Bed, 225mm Swing Over Cross Slide, 1250mm Between Centres, 52mm Spindle Bore, 40-2200rpm Spindle Speeds, Proto Trak VL Control, 3 Jaw Chuck, Quick Change, Toolpost and Holders, Coolant, Machine Light, Interlocked Chuck Guard. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the ...

Preview image
Fin:
19 janv. 2022 16:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£100
Enchères:
16
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 5: Matsuura RA 11 F Twin Pallet Vertical Machining Centre

Matsuura RA 11 F Twin Pallet Vertical Machining Centre, Speed: 8,000rpm (approx.), Spindle Centre to Column: 17.32", Travels: X-Axis: 23.6", Y-Axis: 16.14", Z-Axis: 18.5", Pallet / Table Dimensions: 23.5" x 15", Automatic Tool Changer, BT40 Spindle Taper, 30-Station Automatic Tool Changer, Coolant System, Centralised Lubrication System, RS-232 Port (1994). Country of Origin: Japan

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus ...

Preview image
Fin:
19 janv. 2022 16:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£100
Enchères:
18
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 6: Colchester Electronic Mastiff Lathe

Colchester Electronic Mastiff Lathe with Fanuc 20-Ta Control, Swing on the Bed 554mm, Between Centres 2000mm, Centre Height 280mm, Swing Over Cross Slide 370mm, Cross Slide Stroke 290mm, Spindle Bore 90mm, Spindle Speed Low Range 16 – 204rpm, Spindle Speed Mid-range 48 – 612rpm, Spindle High Range 140 – 180rpm, Spindle Nose Camlock D1 – 11, Tailstock 6. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of ...

Preview image
Fin:
19 janv. 2022 16:40:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
25
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 7: Matsuura RA-1X Twin Pallet Vertical Machining Centre

Matsuura RA-1X Twin Pallet Vertical Machining Centre with Yasnac J300 CNC Control, X = 548.6mm, Y = 408.9mm, Z = 459.7mm, Power = 5.6 kW, 15000rpm, ATC - 30, Table - 599.4mm x 378.5mm, Taper - BT40 (2001). Country of Origin: Japan

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process ...

Preview image
Fin:
19 janv. 2022 16:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
22
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 8: Dahlih DL-MOV 1020BA Machining Centre

Dahlih DL-MOV 1020BA Machining Centre with Heidenhain i530 Control, Table size: 1250mm x 660mm, Table Load: 1000kg, X = 1020mm Y = 550mm Z = 560mm, Speeds 1 - 8000rpm, Variable Rapid Feed - 20,000mm/min, Feed rate - 0.04 - 393mm/min, Spindle Taper BT40, Automatic Tools 24, Spindle Motor 10 kW, Coolant and Twin Swarf Screws (2006). Country of Origin: Taiwan

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically ...

Preview image
Fin:
19 janv. 2022 16:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£100
Enchères:
25
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 9: Asquith Power Thrust 4PT 14-54 Radial Drilling Machines

Asquith Power Thrust 4PT 14-54 Radial Drilling Machines, Spindle Speeds: 9.5 to 1560 (18), Spindle Taper: No 5 Morse, Spindle, Travel: 410mm, Feeds: 0.066 to 0.963, Max Spindle to Base: 70", Column Diameter: 14", Graduations: Metric, Power Locking Equipment, Safety Brake, Box Table, Coolant. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare ...

Preview image
Fin:
19 janv. 2022 16:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£50
Enchères:
19
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 10: Kearns Richards S Type Horizontal Borer

Kearns Richards S Type Horizontal Borer, Main Table: 560 x 405mm, Top Table: 455 x 455mm, Long Traverse: 610mm, Cross Traverse: 320mm, Vertical Traverse: 285mm, Spindle Speeds: 50 – 2000rpm Infinately Variable, Spindle Taper: 40 Int, Feeds: 4- 106mm per min, Electrics: 415v, 3ph, 50 Cycles, Motor: 3HP, Tailstock / Outer Steady, Coolant. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will ...

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories