3074 - Dahlih, Mazak & Matsuura Machining Centres, Gildemeister, XYZ & Colchester Lathes and Other Toolroom Machinery No Longer Required
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 30
Lot 21: Richmond 4ft Radial Drill
Richmond 4ft Radial Drill, Spindle Speeds: 20 to 960 (12), Feeds in inches: from .013 to .004 (4)
Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 22: Moore No. 2 C Jig Grinder
Moore No. 2 C Jig Grinder, Table size: 550mm x 310mm, Table Traverse: 420mm, Cross Traverse: 270mm, Vertical Spindle Traverse: 92mm, Spindle Speeds Planetry 90, 136, 184 & 280rpm, Calibration: Imp. S/No. 299
Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK ...
Lot 23: Jakobsen 1026 Surface Grinder
Jakobsen 1026 Surface Grinder, 600mm x 250mm Electro-Magnetic Chuck, Spark-Out, Manual Wheel Dresser, Coolant, Fully Automatic Grinding Cycle including Coarse and Fine Grinding Cycle with Sparkout to Finish Size, Hydraulic Table Traverse for Smoothest Finish, Ballscrew Cross Traverse for Precise Cross Positioning and Movement with Servo Saddle Lock, Table Cross Traverse, Intermittent or Continuous During Grinding Cycle, Vertical Traverse by Stepping Servo Motor, Rapid Rise & Fall and Variable Feeds, Built in DRO for Relative Positions of Y & Z Axis, Electronic Manual plus Handwheel for Vertical and Cross Movements.
Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. ...
Lot 24: Hurco BMC 30HT Vertical Machining Centre
Hurco BMC 30HT Vertical Machining Centre (1995) (Spares or Repair (Screen Fault))
Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 25: Acme Horizontal Bandsaw
Acme Horizontal Bandsaw
Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 26: Adcock & Shipley 1ES Lathe
Adcock & Shipley 1ES Lathe
Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 27: Masking Tapping Arm & Table
Masking Tapping Arm & Table
Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 28: Startrite 18V 10 Vertical Bandsaw
Startrite 18V 10 Vertical Bandsaw
Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 29: Ajax Power Hacksaw
Ajax Power Hacksaw
Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 30: Samand Double Ended Grinder
Samand Double Ended Grinder
Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.