3069 - Phase 2 Fagima Machining Centre, ZPS ZLIN and Comev Picodue Lathes, Secmu Mill

Engineering

L'enchère s'est terminée le

lundi 6 déc. 2021 at 03:00PM (GMT)

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: These items are located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: There is a strict clearance date of 23rd December 2021.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 22%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

8 déc. 2021 at 17:00 (GMT)

'Date limite d''apurement'

23 déc. 2021 at 17:00 (GMT)

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 11-20 de 74

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
25 déc. 2022 15:00:00 GMT
Temps restant:
132 jours 8 h 21 min. 43 s.
Augmentation:
€500
Enchères:
1
Enchère actuelle:
€7500
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot *: Combination of lots 20, 20A & 20B

Lot 20 - Fagima Fast 400 3-Axis Vertical Machining Centre with Heidenhain Control, Remote Handwheel, ISO 40 Din 10,000rpm Spindle, Table: 4,000 x 500 x 600mm. S/No. 485-04 (2004). Country of Origin: Italy

and

Lot 20A - (4) x Magnetic Chucks - 600 x 320mm. Country of Origin: Italy

and

Lot 20B - Rack with Qty of Tooling. Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lots de cette offre combinée

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

N° de lot Description
Preview image
Fin:
06 déc. 2021 16:30:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€250
Enchères:
8
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 30: Comev Picodue 260 x 2000 CNC Teach Lathe

Comev Picodue 260 x 2000 CNC Teach Lathe with D Electron Control, 8-Station Automatic Turret, Manual Tailstock, Mario Pinto 315mm 3-Jaw Self-Centering Chuck, Centre Height: 260mm, diam. Swing 520mm. S/No. 7312 (2005). Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

*: Combination of lots 30 & 30A

Preview image
Fin:
06 déc. 2021 16:30:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€100
Enchères:
1
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 30A: SMW-Lunette Autoblok SLU-31-MS Hydraulic Steady

SMW-Lunette Autoblok SLU-31-MS Hydraulic Steady. Country of Origin: Germany

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

*: Combination of lots 30 & 30A

Preview image
Fin:
06 déc. 2021 16:30:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€250
Enchères:
40
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot *: Combination of lots 30 & 30A

Lot 30 - Comev Picodue 260 x 2000 CNC Teach Lathe with D Electron Control, 8-Station Automatic Turret, Manual Tailstock, Mario Pinto 315mm 3-Jaw Self-Centering Chuck, Centre Height: 260mm, diam. Swing 520mm. S/No. 7312 (2005). Country of Origin: Italy

and

Lot 30A - SMW-Lunette Autoblok SLU-31-MS Hydraulic Steady. Country of Origin: Germany

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lots de cette offre combinée

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre click here

N° de lot Description
Preview image
Fin:
06 déc. 2021 15:50:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€25
Enchères:
7
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 36: 3-Shelved Tooling Trolley

3-Shelved Tooling Trolley; 95mm h x 53mm x 102mm. Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
06 déc. 2021 15:20:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€5
Enchères:
3
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 41: 3-Shelved Tooling Trolley

3-Shelved Tooling Trolley; 95mm h x 53mm x 102mm. Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
06 déc. 2021 15:00:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€5
Enchères:
3
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 46: 3-Shelved Tooling Trolley

3-Shelved Tooling Trolley; 95mm h x 53mm x 102m. Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
06 déc. 2021 15:00:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€5
Enchères:
3
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 51: Comec 3-Shelved Tooling Trolley

Comec 3-Shelved Tooling Trolley. Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

Preview image
Fin:
06 déc. 2021 17:10:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€250
Enchères:
42
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 55: Takisawa EX-110 Cell Mate Serie 2-Axis CNC Lathe

Takisawa EX-110 Cell Mate Serie 2-Axis CNC Lathe with Fanuc 21i-TB Control, PCMCIA & RS232 Ports, 10-Position Turret, Kitagawa 250mm 3-Jaw Self-Centering Chuck, Hydraulic Tailstock, Distance between Centres: 600mm, Presetting Tool, Swarf Conveyor. S/No. CH10E11174 (2007). Country of Origin: Taiwan

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
06 déc. 2021 16:40:00 GMT
Temps restant:
Enchère terminée
Augmentation:
€10
Enchères:
20
'Prime d''acheteur:'
18%
Taux de TVA:
22%

Lot 56: Fermec Tool Trolley with Compartments & Drawers

Fermec Tool Trolley with Compartments & Drawers. Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories