3069 - Phase 2 Fagima Machining Centre, ZPS ZLIN and Comev Picodue Lathes, Secmu Mill

Engineering

L'enchère s'est terminée le

2021-12-06 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: These items are located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: There is a strict clearance date of 23rd December 2021.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2021-12-08 17:00:00.0

'Date limite d''apurement'

2021-12-23 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 31-40 de 74

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
06 déc. 2021 16:50:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 80: CTC PL430 Forklift Truck

CTC PL430 Forklift Truck, Max. Load: 3,000 Kg, Max. Lift 4,000mm, 1200mm Forks. S/No. 57450103N (2003). Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
06 déc. 2021 16:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 88: (5) x Bays of Adjustable Racking

(5) x Bays of Adjustable Racking, (12) x 2500mm Uprights, 60 x 2250mm Beams (Contents not Included). Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
06 déc. 2021 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 95: Centre Lathe with 3-Position Manual Turret

Centre Lathe with 3-Position Manual Turret, 250mm 3-Jaw Self-Centering Chuck, Centre Height: 220mm, Distance between Centres: 600mm. Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
06 déc. 2021 15:20:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 96A: Vice

Vice. Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Preview image
Fin:
06 déc. 2021 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 102: Pieralisi Crown Electric Pallet Truck

Pieralisi Crown Electric Pallet Truck, Capacity: 1,400kg. S/No. 5A141352. Please Note: The wheels are damaged, sold as shown. Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
06 déc. 2021 15:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 107: Mazzoni Flash 850CB Electric Sweeper

Mazzoni Flash 850CB Electric Sweeper, Sweep Path: 880mm wide, 65 Litre Waste Compartment. S/No. 17000000955. Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
06 déc. 2021 15:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 115: Kaeser SX6 Rotary Compressor

Kaeser SX6 Rotary Compressor. S/No. 1.9694.4 (2000). Country of Origin: Germany

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

*: Combination of lots 115, 115A &115B

Preview image
Fin:
06 déc. 2021 15:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 115A: OMI ED54 Air Dryer

OMI ED54 Air Dryer. S/No. 424110 (2015). Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

*: Combination of lots 115, 115A &115B

Preview image
Fin:
06 déc. 2021 15:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 115B: SICC 270/3110 270 Litre Air Tank

SICC 270/3110 270 Litre Air Tank. S/No. 80000652038 (2000). Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

*: Combination of lots 115, 115A &115B

Preview image
Fin:
06 déc. 2021 15:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot *: Combination of lots 115, 115A &115B

Lot 115 - Kaeser SX6 Rotary Compressor. S/No. 1.9694.4 (2000). Country of Origin: Germany

and

Lot 115A - OMI ED54 Air Dryer. S/No. 424110 (2015). Country of Origin: Italy

and

Lot 115B - SICC 270/3110 270 Litre Air Tank. S/No. 80000652038 (2000). Country of Origin: Italy

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lots de cette offre combinée

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

N° de lot Description
Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories