2717 - CNC Machining Centres, Wire EDMs, Engineering Equipment previously used by Boxall & Edmiston in the Manufacture of Bespoke Shotguns
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These Lots are located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 21-30 von 61
Los 9: Semco Model LC-186VS CNC Turret Milling Machine
Semco Model LC-186VS CNC Turret Milling Machine with Anilam 3000m 3 Axis Control, 250mm x 1270mm Table Size, Powered Draw Bar. S/No. 85041498
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 10: Gate PBM-1000 Turret Milling Machine
Gate PBM-1000 Turret Milling Machine with Newall DP700 3 Axis DRO with 1.07m x 230mm Table Size, 60-4200rpm Spindle Speed, Powerfeed to X Axis. S/No. 201411011 (2014)
Please Note: The vice is not included with this
lot
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 11: Colchester Student 1800 Straight Bed Lathe
Colchester Student 1800 Straight Bed Lathe, 40’’ between Centres, Quick Change Tool Post, Dual Dials, Collet Attachment, 2 & 3 Point Steadies, Anilam Wizard 2 Axis DRO Ainjest Threading Unit. S/No. 4/0003/06041X
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 12: Jones & Shipman 540P Surface Grinder
Jones & Shipman 540P Surface Grinder with Power Rye and Fall, 18’’ x 6’’ Magnetic Chuck, Coolant Unit. S/No. 64643
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 13: Warco WMT 300/2 Multi-Purpose Lathe/Milling Machine
Warco WMT 300/2 Multi-Purpose Lathe/Milling Machine, 5’’ 3-Jaw Chuck, Tailstock approx. 500mm between centres x 90mm Centre Height, Vertical Milling Unit Mounted to Headstock. S/No. 02 11 (2004)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 14: SCR 10C Receiver Mounted Compressor
SCR 10C Receiver Mounted Compressor, 7.5kw. S/No. SA325577 (2015)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 15: Ecoair A7 Receiver Mounted Compressor
Ecoair A7 Receiver Mounted Compressor, 5.5kw. S/No. 2121636 (1999)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 16: Chester Model HV-128 Horizontal/Vertical Bandsaw
Chester Model HV-128 Horizontal/Vertical Bandsaw capacity 150mm diameter, Round Horizontal Mode. S/No. 11040663
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 18: Startrite 14RF Vertical Bandsaw
Startrite 14RF Vertical Bandsaw, 21’’ x 21’’ Tilting Table
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 19: Gate ECL 86OA CNC Lathe
Gate ECL 86OA CNC Lathe with Anilam H200T Control, 200mm 3 Jaw Chuck. S/No. 144090119718 (2009)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.