2682 - Engineering Equipment available on behalf of a Retained Client
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
With the exception of Lot 2 which is subject to a loading charge.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 81
Lot 11: Dean Smith & Grace Type 21 x 48 Toolroom Centre Lathe
Dean Smith & Grace Type 21" x 48" Toolroom Centre Lathe, Swing Over Bed 21", Distance Between Centres 48", Spindle Bore 3 1/2", Spindle Speeds 5.3 - 420rpm, 3 Jaw Chuck, 2 Axis Digital Readout.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Lot 12: Dean Smith & Grace Model 17T Toolroom Centre Lathe
Dean Smith & Grace Model 17T Toolroom Centre Lathe, 17" Swing Over Bed, 48" Distance Between Centres, 2 1/2" Spindle Bore, Speeds 3.9 - 720rpm, Imperial Leadscrew & Dual Dials, Taper Turning, 4 Way Toolpost, Digital Readout.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 13: Dean Smith & Grace Type 1307 x 40 Gap Bed Centre Lathe
Dean Smith & Grace Type 1307 x 40 Gap Bed Centre Lathe, 13" Swing Over Bed, 26" Swing in Gap, 40" Distance Between Centres, Spindle Bore 2", Spindle Speeds 20 to 1600rpm, 3 Jaw Chuck, 3 Point Steady.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 14: Colchester Mascot VS2000 Gap Bed Centre Lathe
Colchester Mascot VS2000 Gap Bed Centre Lathe, Swing Over Bed 460mm, Swing Over Cross Slide 270mm, Swing in Gap 730mm, Distance Between Centres 1500mm, Spindle Bore 76mm, Spindle Speeds 20-2000rpm Variable, Metric Leadscrew & Dials. (1995)
Please Note: This Item is for Spares & Repairs Only
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 15: Harrison M300 Tool Room Gap Bed Centre Lathe
Harrison M300 Tool Room Gap Bed Centre Lathe, Swing Over Bed 13", Distance Between Centres 25", Spindle Bore 1 1/2", Spindle Speeds 58 - 2500rpm.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 16: Harrison M300 Tool Room Centre Lathe
Harrison M300 Tool Room Centre Lathe, Swing Over Bed 13", Distance Between Centres 25", Spindle Bore 1 1/2", Spindle Speeds 58 - 2500rpm.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 18: Gap Bed Centre Lathe
Gap Bed Centre Lathe, Swing Over Bed 325mm, Swing in Gap 475mm, Distance Between Centres 900mm, Spindle Speeds 54 - 2000rpm, Spindle Bore 40mm, Metric Leadscrew, Dual Dials, Quick Change Tool Post, 3 Jaw Chuck, Face Plate & Travel Steady.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 19: Myford Super 7 Centre Lathe
Myford Super 7 Centre Lathe with Clutch, Swing Over Bed 7", Between Centres 20", Spindle Bore 5/8", Speeds 25 - 2150rpm, 4" Diameter 3 Jaw Chuck, 6" 4 Jaw Chuck, Myford Cabinet Stand, 3 Phase.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 20: Rambo Type 5V CNC Vertical Milling Machine
Rambo Type 5V CNC Vertical Milling Machine, Table 1470mm x 300mm, X Traverse 1200mm, C Tek Type CNT806A Control.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 21: Rambo 3V CNC Vertical Turret Mill
Rambo 3V CNC Vertical Turret Mill with Ctek CNT803A Control, Table Size 50" x 10", Spindle Taper 40 ISO with Power Drawbar.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.