2682 - Engineering Equipment available on behalf of a Retained Client
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
With the exception of Lot 2 which is subject to a loading charge.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 81
Lot 1: Binns & Berry Model Trident L1000 Gap Bed Centre Lathe
Binns & Berry Model Trident L1000 Gap Bed Centre Lathe with Swing Over Bed 1000mm, Swing Over Saddle 850mm, Swing in Gap 1500mm, Distance Between Centres 7500mm, Spindle Speeds 4 - 1250rpm, Spindle Nose D1 - 11 Camlock, Motor Power 30 HP, Number of Feeds 70, Number of Metric Pitches 80, Number of Inch Pitches 90, Tailstock Taper No.6 Morse, Equipment: 3 Jaw Chuck 600mm, 4 Jaw Chuck 36", 2 Faceplates 30 & 40", 3 Fixed 3 Point Steadies 300, 500 & 780mm, 1 Fixed 2 Point Steady 300mm, Acu-rite Wizard 411 DRO.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 2: Haas SL-40THE CNC Lathe
Haas SL-40THE CNC Lathe with Haas Control, 10 Station Tool Changer, VDI 40 Tooling, Tail Stock, 15” 3-Jaw Chuck. S/No. 3078375 (08/07)
Please Note: This lot is located in Cheshire and will be loaded to a suitable vehicle at a cost of £400.00. This charge will be automatically added to your invoice should you be successful in purchasing this item. Blocking & Securing will be at the cost of the purchaser.
Lot 3: XYZ Vulcan Model VH 1010 Vertical Machining Centre
XYZ Vulcan Model VH 1010 Vertical Machining Centre with Siemens Sinumeric Control, X Traverse 1010mm, Y Traverse 509mm, Z Traverse 509mm, Spindle Centre to Column 625mm, Spindle to Table 200 - 700mm, Spindle Taper BT40, Spindle Speeds 60 - 6000rpm. (2002)
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 4: Kira Type KN Drill Mill
Kira Type KN Drill Mill with Fanuc 0N Control, 8 Station Turret, Drilling & Tapping.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 5: Colchester Magnum 1250 Gap Bed Centre Lathe
Colchester Magnum 1250 Gap Bed Centre Lathe, Swing Over Bed 25", Swing in Gap 36", Swing Over Cross Slide 15", Distance Between Centres 88", Spindle Bore 4 5/8", Spindle Speeds 6.3 - 1250rpm, Motor 20HP, Swing Over Saddle 15 3/8", 15" 3 Jaw Chuck, 630mm 4 Jaw Chuck, 27" Face Plate, 340mm 3 Point Steady, Quick Change Toolpost.
Please Note: Gap Piece is missing.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Lot 6: XYZ DPM Bed Type 3 Axis CNC Milling Machine
XYZ DPM Bed Type 3 Axis CNC Milling Machine with Prototrak MX3 Control, Table 50" x 12 1/2", Spindle Taper 40 ISO, Spindle Speeds 70 - 3800 Variable, Throat 19".
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 7: XYZ PRO3000 2 Axis Turret Milling Machine
XYZ PRO3000 2 Axis Turret Milling Machine with Prototrak MX2 Control, Table 54" x 12", Spindle Taper 40 ISO, Spindle Speeds Variable up to 3600rpm.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 8: Okamoto Model 63DX Toolroom Surface Grinder
Okamoto Model 63DX Toolroom Surface Grinder, Capacity 600mm x 300mm, 1 Axis NC Type PSG-DX Series, Overhead Hydraulic Dresser, Magnetic Chuck.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 9: Jones & Shipman 1311 EIU Cylindrical Grinder
Jones & Shipman 1311 EIU Cylindrical Grinder with Internal Spindle, Capacity 10" x 18", Variable Table Traverse 3" - 144", Table Adjustment 20 Degrees, Swivelling Head, Coolant Tank.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 10: Dean Smith & Grace Type 25 x 120" Gap Bed Centre Lathe
Dean Smith & Grace Type 25 x 120" Gap Bed Centre Lathe, Swing Over Bed 27", Swing in Gap 40", Distance Between Centres 120", Spindle Bore 4 1/8", Spindle Speeds 11.3 - 930rpm, 24" 4 Jaw Chuck, 450mm 3 Point Steady, ACU-RITE 2 Axis Digital Readout.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.