Hyundai Wia KBN 135C Horizontal Boring & Drilling Machine with Fanuc Control. S/No. 63215-0084 (2017) with 5 Axis, Table Size 2000 x 1800mm, Spindle Range 3-2000 RPM, Spindle Taper BT50, 40 ATC, Jet Master MSHC 20 P15LT Filtration, Spindle Chiller, Swarf Conveyor, Guarding.

                                              SOLD 

                              PRE-AUCTION OFFER AGREED

Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Various BT50 Spindle Tool Holders used on Hyundai KBN-135C Horizontal Machining Centre

                                               SOLD
                             PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lenzkes Work Holding Clamping and Chain Strapping with Vee Blocks

                                                SOLD
                              PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various BT50 Spindle Boring Heads and Extension Pieces used on Hyundai KBN-135C Horizontal Machining Centre

                                              SOLD
                           PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(2) x Steel Fabricated Angle Plates, Size 765mm x 2000mm High, M20 Thread Holes on 100mm Pitch Centres, Including Bed Spacer Feet

                                             SOLD
                           PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Cogsdill MBT50-SP-SK50-0, Valve Seat Pocket Spindle Tool used on Hyundai Horizontal Borer, Type MBT50 Single Slide Head. S/No. Wo.48457

                                              SOLD
                            PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Cogsdill ZX300-TC-SK 50-0,ZX300 Facing and Generating Spindle Head with Spacer Collar. S/No. Wo.52425

                                            SOLD
                           PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Cogsdill MBT100-SP-SK50-0, MBT100 Single Slide Spindle Head. S/No. Wo.52411

                                                 SOLD
                            PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 1 - 1G

Lot 1 - Hyundai Wia KBN 135C Horizontal Boring & Drilling Machine with Fanuc Control. S/No. 63215-0084 (2017) with 5 Axis, Table Size 2000 x 1800mm, Spindle Range 3-2000 RPM, Spindle Taper BT50, 40 ATC, Jet Master MSHC 20 P15LT Filtration, Spindle Chiller, Swarf Conveyor, Guarding.

Lot 1A - Various BT50 Spindle Tool Holders used on Hyundai KBN-135C Horizontal Machining Centre

Lot 1B - Lenzkes Work Holding Clamping and Chain Strapping with Vee Blocks

Lot 1C - Various BT50 Spindle Boring Heads and Extension Pieces used on Hyundai KBN-135C Horizontal Machining Centre

Lot 1D - (2) x Steel Fabricated Angle Plates, Size 765mm x 2000mm High, M20 Thread Holes on 100mm Pitch Centres, Including Bed Spacer Feet

Lot 1E - Cogsdill MBT50-SP-SK50-0, Valve Seat Pocket Spindle Tool used on Hyundai Horizontal Borer, Type MBT50 Single Slide Head. S/No. Wo.48457

Lot 1F - Cogsdill ZX300-TC-SK 50-0,ZX300 Facing and Generating Spindle Head with Spacer Collar. S/No. Wo.52425

Lot 1G - Cogsdill MBT100-SP-SK50-0, MBT100 Single Slide Spindle Head. S/No. Wo.52411

                                               SOLD
                             PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Doosan Puma VTS1620M Lathe with Fanuc i-series Control. S/No. MT0038-000084 (2014) Various Fixed Turning and BT50 Spindle Tooling from Doosan VTS1620m Vertical Lathe, Including Various Chuck Jaws

                                             SOLD
                         PRE-AUCTION OFFER AGREED

Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Driven and Fixed Spindle Tooling from Doosan VTS 1620m Vertical Lathe, Including New and Used Soft Jaws for Chuck

                                                SOLD
                             PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 2 & 2A

Lot 2 - Doosan Puma VTS1620M Lathe with Fanuc i-series Control. S/No. MT0038-000084 (2014) Various Fixed Turning and BT50 Spindle Tooling from Doosan VTS1620m Vertical Lathe, Including Various Chuck Jaws

Lot 2A - Driven and Fixed Spindle Tooling from Doosan VTS 1620m Vertical Lathe, Including New and Used Soft Jaws for Chuck

                                                SOLD
                             PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mazak Integrex E-650H-II Turning Machine. S/No. 216892 (2010) with Mazatrol Matrix Control, 810mm Dia 3-Jaw Chuck, Tailstock, Long Boring Bar Attachment, Manual Steady, Tooleye, Swarf Conveyor, 40 ATC, CAT50 Taper 4M BC, Max Length 3500mm, Various SK50 Spindle Tool Holders and 80 & 100mm Boring Bars, Boring Bar Sizes 80 x 1200mm, 100 x 1500mm, as used on Mazak Integrex 650 Machine, Various SK50 Spindle Tool Holders as used on Mazak Integrex 500 Machine Including (2) x Boring Bars, 80 x 800mm & 80 x 1200mm

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Various SK50 Spindle Tool Holders as used on Mazak Integrex 650 Machine

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various Soft Jaws as used on Maxak Integrex 650 Machine

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various Soft Jaws as used on Mazak Integrex 650 Machine

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Unused Soft Jaws as used on Mazak Integrex 650 Machine

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Alberti Saronno (Italy) Modulo "B" H360 Right Angle Milling Head Attachment, Takes ER32 Collets (Not Included), 50 Spindle Back End Attachment Max RPM 4000

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Sandvik Silent Tools Coroturn SL 570-3C Boring Bar, Size 100 x 1100mm Unused

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Hydraulic Steady Stand from Mazak Integrex 650 Machine

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 3 - 3G

Lot 3 - Mazak Integrex E-650H-II Turning Machine. S/No. 216892 (2010) with Mazatrol Matrix Control, 810mm Dia 3-Jaw Chuck, Tailstock, Long Boring Bar Attachment, Manual Steady, Tooleye, Swarf Conveyor, 40 ATC, CAT50 Taper 4M BC, Max Length 3500mm

Lot 3A - Various SK50 Spindle Tool Holders as used on Mazak Integrex 650 Machine

Lot 3B - Various Soft Jaws as used on Maxak Integrex 650 Machine

Lot 3C - Various Soft Jaws as used on Maxzak Integrex 650 Machine

Lot 3D - Unused Soft Jaws as used on Mazak Integrex 650 Machine

Lot 3E - Alberti Saronno (Italy) Modulo "B" H360 Right Angle Milling Head Attachment, Takes ER32 Collets (Not Included), 50 Spindle Back End Attachment Max RPM 4000

Lot 3F - Sandvik Silent Tools Coroturn SL 570-3C Boring Bar, Size 100 x 1100mm Unused

Lot 3G - Hydraulic Steady Stand from Mazak Integrex 650 Machine

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mazak Integrex E-500H-II Turning Machine with Mazatrol Matrix Control. S/No. 204074 (2008), 610mm 3-Jaw Chuck, 40 ATC, Tailstock, Manual Steady 3m between centres, Internal Boring Bar, Max Swing 817mm, Swarf Conveyor.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Various SK50 Spindle Tool Holder as used on Mazak Integrex 500 Machine

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various Soft Jaws as used on Mazak Integrex 500 Machine

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mazak Integrex 500 Steady Frame Body

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 4 - 4C

Lot 4 - Mazak Integrex E-500H-II Turning Machine with Mazatrol Matrix Control. S/No. 204074 (2008), 610mm 3-Jaw Chuck, 40 ATC, Tailstock, Manual Steady 3m between centres, Internal Boring Bar, Max Swing 817mm, Swarf Conveyor.

Lot 4A - Various SK50 Spindle Tool Holder as used on Mazak Integrex 500 Machine

Lot 4B - Various Soft Jaws as used on Mazak Integrex 500 Machine

Lot 4C - Mazak Integrex 500 Steady Frame Body

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mazak Integrex E-500H-II Turning Machine with Mazatrol Matrix Control. S/No. 185958 (2006), 610mm 3-Jaw Chuck, 40 ATC, Tailstock, Manual Steady 3m between centres, Internal Boring Bar, Max Swing 817mm, Swarf Conveyor. Various SK50 Spindle Tool Holders as used on Mazak Integrex 500 Machine Including (2) x Boring Bars, 80 x 900mm & 80 x 1200mm

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Various SK50 Spindle Tool Holders and Collets as used on Mazak Integrex 500 Machine

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various SK50 Spindle Tool Holder and Collets as used on Mazak Integrex 500 Machine

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various SK50 Spindle Tool Holders and Collets as used on Mazak Integrex 500 Machine

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Centreline Right Angle Milling Head with Various Interchangeable ISO30 Tool Holders, SK50 Back End Taper. Head used on Mazak Integrex 500 Machine. S/No. 005395

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 5 - 5D

Lot 5 - Mazak Integrex E-500H-II Turning Machine with Mazatrol Matrix Control. S/No. 185958 (2006), 610mm 3-Jaw Chuck, 40 ATC, Tailstock, Manual Steady 3m between centres, Internal Boring Bar, Max Swing 817mm, Swarf Conveyor. Various SK50 Spindle Tool Holders as used on Mazak Integrex 500 Machine Including (2) x Boring Bars, 80 x 900mm & 80 x 1200mm.

Lot 5A - Various SK50 Spindle Tool Holders and Collets as used on Mazak Integrex 500 Machine

Lot 5B - Various SK50 Spindle Tool Holders and Collets as used on Mazak Integrex 500 Machine

Lot 5C - Various SK50 Spindle Tool Holders and Collets as used on Mazak Integrex 500 Machine

Lot 5D - Centreline Right Angle Milling Head with Various Interchangeable ISO30 Tool Holders, SK50 Back End Taper. Head used on Mazak Integrex 500 Machine. S/No. 005395

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mazak Integrex E-800V5 5-Axis Twin Pallet Machining Centre. S/No. 179875 (2006) with Mazatrol 640M Pro Control, 610mm Dia, Rotary Table, 500 x 500mm Pallet, Spindle Chiller, 80 ATC, Swarf Conveyor, Spindle Taper Capto C6, Various Capto C6 Spindle Tool Holders for Turning & Milling, Turning Plate Bed Fixture and Various Soft Jaws as used on Mazak Integrex 800V.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

EZ Set 600 Tool Pre-setting Machine, 50 Taper Spindle Seating. S/No. EZS 600C2X-00092 (2018) Operating and Image Processing Manuals

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Iscar ETM Shrink In Induction Shrink Unit, Type IND 2019. S/No. 571216/2019, Including Various Size SK50 Heat Shrink Spindle Tooling, Gloves and Manual

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Doosan Puma 600L Lathe. S/No. ML0157-001127 (2012) with Fanuc 32i Control, 3000mm between centres, 800mm Dia Chuck, 12-Station Turret, Tailstock, Swarf Conveyor, Tooleye. Turret Tool Holders, Sleeves & Boring Bars, Various Soft and Hard Jaws.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Fixed Steady and Large Boring Bar used on Doosan Puma 600L Machine

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various Capto Tooling for Turning on Doosan Puma 600L Machine

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 7 - 7B

Lot 7 - Doosan Puma 600L Lathe. S/No. ML0157-001127 (2012) with Fanuc 32i Control, 3000mm between centres, 800mm Dia Chuck, 12-Station Turret, Tailstock, Swarf Conveyor, Tooleye.

Lot 7A - Fixed Steady and Large Boring Bar used on Doosan Puma 600L Machine

Lot 7B - Various Capto Tooling for Turning on Doosan Puma 600L Machine

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Doosan Puma 600L Lathe S/No. ML0157-001126 (2012) with Fanuc 32i Control, 3000mm between centres, 800mm Dia Chuck, 12-Station Turret, Tailstock, Swarf Conveyor, Tooleye, Various Turret Tool Holders, Sleeves & Soft Jaws 

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Fixed Steady as used on Doosan Puma 600L Machine

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 8 & 8A

Lot 8 - Doosan Puma 600L Lathe. S/No. ML0157-001126 (2012) with Fanuc 32i Control, 3000mm between centres, 800mm Dia Chuck, 12-Station Turret, Tailstock, Swarf Conveyor, Tooleye.

Lot 8A - Fixed Steady as used on Doosan Puma 600L Machine

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mazak Integrex 400-III Multi-tasking Lathe. S/No. 181130 (2005), 40 ATC Tailstock, Tooleye, 390mm Dia SMW Autoblock Chuck, Swarf Conveyor. Includes Various Kenametal KM63 Spindle Tool Holders

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Various Kenametal KM63 Spindle Tool Holders

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various Soft and Hard Jaws

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 9, 9A & 9B

Lot 9 - Mazak Integrex 400-III Multi-tasking Lathe. S/No. 181130 (2005), 40 ATC Tailstock, Tooleye, 390mm Dia SMW Autoblock Chuck, Swarf Conveyor. Includes Various Kenametal KM63 Spindle Tool Holders

Lot 9A - Various Kenametal KM63 Spindle Tool Holders

Lot 9B - Various Soft and Hard Jaws

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mazak Integrex 400-III Multi-tasking Lathe. S/No. 176257 (2005), 40 ATC Tailstock, Tooleye, 390mm Dia SMW Autoblock Chuck, Swarf Conveyor. Various Kenametal KM63 Spindle Tool Holders

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Various Kenametal KM63 Spindle Tool Holders

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various Soft and Hard Jaws

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 10, 10A & 10B

Lot 10 - Mazak Integrex 400-III Multi-tasking Lathe. S/No. 176257 (2005), 40 ATC Tailstock, Tooleye, 390mm Dia SMW Autoblock Chuck, Swarf Conveyor

Lot 10A - Various Kenametal KM63 Spindle Tool Holders

Lot 10B - Various Soft and Hard Jaws

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mazak Quick Turn Nexus 450-II M Lathe. S/No. 206692 (2008) with Mazatrol Matrix Nexus Control, 12-Station Turret, Tailstock, Tooleye, SMW Autoblock Hydraulic Steady, 530mm Dia 3-Jaw Chuck, Swarf Conveyor.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Driven and Fixed Turret Tool Holders and Sleeves

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 11 & 11A

Lot 11 - Mazak Quick Turn Nexus 450-II M Lathe. S/No. 206692 (2008) with Mazatrol Matrix Nexus Control, 12-Station Turret, Tailstock, Tooleye, SMW Autoblock Hydraulic Steady, 530mm Dia 3-Jaw Chuck, Swarf Conveyor.

Lot 11A - Driven and Fixed Turret Tool Holders and Sleeves

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mazak Quick Turn Nexus 450-II M Lathe. S/No. 206691 (2008) with Mazatrol Matrix Nexus Control, 12-Station Turret, Tailstock, Tooleye, SMW Auto SLK 3225 Hydraulic Steady, 450mm Dia, 5-Jaw Chuck

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Driven Turret Tool Holders and Sleeves

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 12 & 12A

Lot 12 - Mazak Quick Turn Nexus 450-II M Lathe. S/No. 206691 (2008) with Mazatrol Matrix Nexus Control, 12-Station Turret, Tailstock, Tooleye, SMW Auto SLK 3225 Hydraulic Steady, 450mm Dia, 5-Jaw Chuck

Lot 12A - Driven Turret Tool Holders and Sleeves

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mazak Slant Turn 50 NR Lathe. S/No. 185957 (2006) with Mazatrol 640T Control, 10-Station Turret, Tailstock, Steady, 610mm Dia 3-Jaw Chuck, Tooleye, Swarf Conveyor. Various Turret Tool Holders, Turn & Boring Bars, Sleeves for Mazak Slant Turn 50.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Various Lathe Tool Holders and Sleeves

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various Lathe Tool Holders and Sleeves

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various Large Lathe Boring Bars

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.