Neotecman F-32XL Hot Forging Press (2015)

Please Note: These lots are located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Neotecman F-32L Hot Forging Press (2011)

Please Note: These lots are located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

BRF (Riello) AZ-134/60 CN 3-Way, 8-Station Trunnion Type Rotary Transfer Machine. S/No. FE 02031500 (Rebuilt 2016)
AI Loading System with ABB Robot load/unload, 12 units including 3 Recessing of which has Y axis for off centre operations, Programmable ejector, Hopper & Conveyor loader, Fuzi drilling/tapping system. ESA control with touch screen control.

Please Note: These lots are located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Techno Wash SD600/3 Techline with Siemens Simatic HMI Control. S/No. 51340 (05/2016)

Please Note: These lots are located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Garant 3 Drawer Cabinet with Riello Ancillary Equipment and Fusi Heads suitable for Riellos

Please Note: These lots are located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Combination of lots 3, 3A & 3B

Lot 3 - BRF (Riello) AZ-134/60 CN 3-Way, 8-Station Trunnion Type Rotary Transfer Machine. S/No. FE 02031500 (Rebuilt 2016)
AI Loading System with ABB Robot load/unload, 12 units including 3 Recessing of which has Y axis for off centre operations, Programmable ejector, Hopper & Conveyor loader, Fuzi drilling/tapping system. ESA control with touch screen control.

Lot 3A - Techno Wash SD600/3 Techline with Siemens Simatic HMI Control. S/No. 51340 (05/2016)

Lot 3B - Garant 3 Drawer Cabinet with Riello Ancillary Equipment and Fusi Heads suitable for Riellos

Please Note: These lots are located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Riello A212/124 CN - 8/0 RTM, 3-Way, 8-Station Trunnion Type Rotary Transfer Machine. S/No. 21.514.000 (1999), Kawasaki Robot Load with Robot, Unload with ejector, Hopper Fed, Fanuc CNC Riello interface - 12 Units including 3 recessing heads

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Vixen Surface Treatment Tristar Wash, Type TS504. S/No. 2129 (2008)

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Lot 4 - Riello A212/124 CN - 8/0 RTM, 3-Way, 8-Station Trunnion Type Rotary Transfer Machine. S/No. 21.514.000 (1999), Kawasaki Robot Load with Robot, Unload with ejector, Hopper Fed, Fanuc CNC Riello interface - 12 Units including 3 recessing heads

Lot 4A - Vixen Surface Treatment Tristar Wash, Type TS504. S/No. 2129 (2008)

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Riello A2.12 / 124 - CNC/8-0 RTM, 3-Way, 8-Station Trunnion Type Rotary Transfer Machine. S/No. 21.504 (1998) Kawasaki Robot Load with Robot, Unload with ejector, Hopper Fed, Fanuc 18T CNC Riello interface, 12 Units including 3 recessing heads

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Vixen Surface Treatment Tristar Wash, Type TS504. S/No. 2138 (2008)

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Combination of lots 5 & 5A

Lot 5 - Riello A2.12 / 124 - CNC/8-0 RTM, 3-Way, 8-Station Trunnion Type Rotary Transfer Machine. S/No. 21.504 (1998), Kawasaki Robot Load with Robot, Unload with ejector, Hopper Fed, Fanuc 18T CNC Riello interface, 12 Units including 3 recessing heads

Lot 5A - Vixen Surface Treatment Tristar Wash, Type TS504. S/No. 2138 (2008)

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Riello AZ 3/124-200M/4-V Vertiflex 4-Station Rotary Transfer Machine. S/No. 21.679.000 (2008) Horizontal Turret (Hanging Table) - 4 station with programmable 90 degree indexing on the Chucks. L/H 6 station turret, Rear Work Head 6 station turret with a recessing unit, R/H Work Head Recessing Unit, There is no washing machine with this, ABB robot with load & unload, Full part vision system stillage feed

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Riello AZ 10-124-50 CN / 6-V RTM Rotary Transfer Machine. S/No. 21.452 (1995), 1st Generation CNC machine making Elbows & 45 degree bends, 9 Units fitted, Riello Control & interface, Kawasaki Robot - load only, Stillage & Hopper Load with stepper feed to Robot.

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Vixen Surface Treatment Tristar Wash Type TS504. S/No. 2150 (2008)

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Lot 7 - Riello AZ 10-124-50 CN / 6-V RTM Rotary Transfer Machine. S/No. 21.452 (1995), 1st Generation CNC machine making Elbows & 45 degree bends, 9 Units fitted, Riello Control & interface, Kawasaki Robot - load only. Stillage & Hopper Load with stepper feed to Robot.

Lot 7A - Vixen Surface Treatment Tristar Wash Type TS504. S/No. 2150 (2008)

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat HB45-12 NC Rotary Transfer Machine (1998), Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat Head Hydraulic Test Rig

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Combination of lots 8 & 8A

Lot 8 - Hydromat HB45-12 NC Rotary Transfer Machine (1998), Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Lot 8A - Hydromat Head Hydraulic Test Rig

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Ikegai TC15 CNC Lathe with Fanuc OT Control, 8 Station ATC, Tooleye, Swarf Conveyor, Pick 7 Place Gantry Robot with Siemens Simatic Panel. S/No. 50748

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat HW25-12 NC Rotary Transfer Machine, Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat HW25-12 NC Rotary Transfer Machine, S/No. 95/64, Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat HW25-12 NC Rotary Transfer Machine (1991) Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Combination of lots 9, 10 & 11

Lot 9 - Hydromat HW25-12 NC Rotary Transfer Machine, Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil

Lot 10 - Hydromat HW25-12 NC Rotary Transfer Machine, S/No. 95/64, Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Lot 11 - Hydromat HW25-12 NC Rotary Transfer Machine (1991) Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat HW25-12 NC Rotary Transfer Machine (1990) Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat HW25-12 NC Rotary Transfer Machine (1999) Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat HW25-12 NC Rotary Transfer Machine, Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration (1995)

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Combination of lots 12, 13 & 14

Lot 12 - Hydromat HW25-12 NC Rotary Transfer Machine (1990) Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Lot 13 - Hydromat HW25-12 NC Rotary Transfer Machine (1999) Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Lot 14 - Hydromat HW25-12 NC Rotary Transfer Machine, Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration (1995)

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat HW25-12 NC Rotary Transfer Machine (1994), Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat HW25-12 NC Rotary Transfer Machine, Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat HW25-12 NC Rotary Transfer Machine, Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Combination of lots 15,16 & 17

Lot 15 - Hydromat HW25-12 NC Rotary Transfer Machine (1994), Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Lot 16 - Hydromat HW25-12 NC Rotary Transfer Machine, Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Lot 17 - Hydromat HW25-12 NC Rotary Transfer Machine, Smog-Hog Filter, Swarf Conveyor, PLC Control, Bar Feed, Component Inspection Table, Accumulation Bench, Coolant / Oil Filtration

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat head unit 1D 5.62.088-1/2 Recess- Internal & external for 30/60 flange with trolley

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat head unit 1D 5.60.077-3/4 Recess- Internal & external for 20/50 flange with trolley

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat head unit 1D 5.14.058 Drilling/ turning for 30/60 flange

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat head unit 1D F5.16.046-1/2 Drilling/turning for 30/60 flange

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat head unit 1D 5.14.062-5/6 Drilling/milling/turning for 20/50 flange

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat head unit 1D 5.14.062 Drilling/milling/turning for 20/50 flange

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat head unit 1D 5.21.036-3/4 threading for 30/60 flange

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat head unit 1D F5.14.063-5/6 Drilling/milling/turning for 30/60 flange

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat head unit 1D 5.16.046 Recess/drilling/milling for 30/60 flange

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat head unit 1D 5.60.0113-1/2 milling for 20/50 flange

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.e

Hydromat roll marking assy for attachment to station 1 on HB45/12 feed tube

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat head unit 1D 6.10.0123-1 for 30/60 with flange for X/Y axis adjustment

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat head unit 1D 5.16.046 1/2 Recess internal/external for 30/60 flange recess head No 5.16.014-2

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat Head unit 10 5.17.010-1/2 Recess internal/external for 30/60 flange recess unit 1D 5.16.036

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat Head Unit ID 5.60.0113-1/2 with Flange MS.10.143 (L-200) with 2 Milling Heads

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat Head Unit ID 5.60.0113-1/2 with Flange MS.10.143 (L-200) with 2 Milling Heads

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat Head Unit ID 5.17.008, Drill/Turn/Recess Unit Only

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Selection of Hydromat Flanges for HW25 Machine

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Selection of Motors for Hydromat Heads

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Selection of Mydromat Head Pulleys and Gears

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Mobile Trolley with Hydromat Hydraulic Pipe Spares and Trolley Suitable for Hydromat Heads

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Selection of Hydromat Spare Caseings & Fittings

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat Pneumatic Motor Atex 11-2-GDC-T4

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Selection of Hydromat Head Spares incl. Securing Guide Rings, Delay Cylinders, Threading Drive Shafts, Adaptor Plates, Valenite Spares.

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Lot 17A - Hydromat head unit 1D 5.62.088-1/2 Recess- Internal & external for 30/60 flange with trolley

Lot 17B - Hydromat head unit 1D 5.60.077-3/4 Recess- Internal & external for 20/50 flange with trolley

Lot 17C - Hydromat head unit 1D 5.14.058 Drilling/ turning for 30/60 flange

Lot 17D - Hydromat head unit 1D F5.16.046-1/2 Drilling/turning for 30/60 flange

Lot 17E - Hydromat head unit 1D 5.14.062-5/6 Drilling/milling/turning for 20/50 flange

Lot 17F - Hydromat head unit 1D 5.14.062 Drilling/milling/turning for 20/50 flange

Lot 17G - Hydromat head unit 1D 5.21.036-3/4 threading for 30/60 flange

Lot 17H - Hydromat head unit 1D F5.14.063-5/6 Drilling/milling/turning for 30/60 flange

Lot 17I - Hydromat head unit 1D 5.16.046 Recess/drilling/milling for 30/60 flange

Lot 17J - Hydromat head unit 1D 5.60.0113-1/2 milling for 20/50 flange

Lot 17K - Hydromat roll marking assy for attachment to station 1 on HB45/12 feed tube

Lot 17L - Hydromat head unit 1D 6.10.0123-1 for 30/60 with flange for X/Y axis adjustment

Lot 17M - Hydromat head unit 1D 5.16.046 1/2 Recess internal/external for 30/60 flange recess head No 5.16.014-2

Lot 17N - Hydromat Head unit 10 5.17.010-1/2 Recess internal/external for 30/60 flange recess unit 1D 5.16.036

Lot 17O - Hydromat Head Unit ID 5.60.0113-1/2 with Flange MS.10.143 (L-200) with 2 Milling Heads

Lot 17P - Hydromat Head Unit ID 5.60.0113-1/2 with Flange MS.10.143 (L-200) with 2 Milling Heads

Lot 17Q - Hydromat Head Unit ID 5.17.008, Drill/Turn/Recess Unit Only

Lot 17R - Selection of Hydromat Flanges for HW25 Machine

Lot 17S - Selection of Motors for Hydromat Heads

Lot 17T - Selection of Mydromat Head Pulleys and Gears

Lot 17U - Selection of Mydromat Head Pulleys and Gears

Lot 17V - Selection of Hydromat Spare Caseings & Fittings

Lot 17W - Hydromat Pneumatic Motor Atex 11-2-GDC-T4

Lot 17X - Selection of Hydromat Head Spares incl. Securing Guide Rings, Delay Cylinders, Threading Drive Shafts, Adaptor Plates, Valenite Spares.

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Hydromat PTH Turning Heads, Tips & Holders, Cutters incl. Cabinet

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Kelch Kenova Set Line V466E Pre-setter. S/No. V4-0103 (2015) Suitable for Hydromat

Please Note: This lot is located in Staffordshire UK. Unfortunately there are no loading facilities on-site. Dismantling and Loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.

Combination of lots 17Y & 17Z

Lot 17Y - Hydromat PTH Turning Heads, Tips & Holders, Cutters incl. Cabinet

Lot 17Z - Selection of Hydromat Head Spares incl. Securing Guide Rings, Delay Cylinders, Threading Drive Shafts, Adaptor Plates, Valenite Spares.

Please Note: These lots are located in Staffordshire UK. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis. Furthermore, the purchaser shall at its own costs be responsible for ensuring that these items are exported in accordance with the original equipment manufacturers (OEM) specification in order to avoid any difficulties with support in the destination country.