--Large Capacity Boring Mills, Horizontal & Vertical Turning Lathes, Toolroom & Fabrication Equipment surplus to the ongoing requirements of Howden ČKD Compressors s.r.o. - 2726
Engineering
Artikelbeschreibung
Location: These lots are located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 21.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-48 von 48
Los 1: Blankso SK50E Twin Column VTL
Blankso SK50E Twin Column VTL (1974)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 2: Blankso SK40 Twin Column VTL
Blankso SK40 Twin Column VTL, 4000mm Dia Table, Grinding Head. S/No. 40034-9 (1959)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 3: TOS SKQ16 CNC B VTL
TOS SKQ16 CNC B VTL, Mefi CNC Control. S/No. 2212047
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 4: TOS SKQ20NC VTL
TOS SKQ20NC VTL with KNS 421 Control, 2000mm Table Diameter. S/No. 221209
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 5: TOS SK16-1 VTL
TOS SK16-1 VTL. S/No. 71953
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 6: Toshulin SKQ12NC VTL
Toshulin SKQ12NC VTL, 1250mm Diameter Chuck. S/No. 2212042
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 7: Skoda W200HBNC Floor Borer
Skoda W200HBNC Floor Borer, 3500 x 4000mm Rotary Table, (9) x Various Milling/Drilling Heads, Floor Plates, Angle Plates, Sinumerik System 8 CNC. S/No. 0B22927 (1986)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 8: Skoda WD200 Floor Borer
Skoda WD200 Floor Borer. S/No. 0B17205 (1988)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 9: Skoda WD200A Floor Borer
Skoda WD200A Floor Borer, E20 2000mm x 2000mm Rotary Table. S/No. 18637 (1987)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 10: Skoda WD200A Floor Borer
Skoda WD200A Floor Borer, E20 2000mm x 2000mm Rotary Table, BMD 500 Tool Setter. S/No. 18638 (1987)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 11: Skoda WD160 Floor Borer
Skoda WD160 Floor Borer S/No. 0B17205
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 12: Johnford Omnitechnique Super Vertical VMC-2000SHD Machining Centre
Johnford Omnitechnique Super Vertical VMC-2000SHD Machining Centre, Fanuc 21i-MB Control, 40 ATC. S/No. VDB8053 (2008)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 13: TOS Kurim FSQ-80-CNC Bed Type Milling Machine
TOS Kurim FSQ-80-CNC Bed Type Milling Machine, Mefi CNC Control, Toolchanger, 3000mm x 800mm. S/No. 14050 (1988)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 14: TOS FRD16 x 30 Plano Mill
TOS FRD16 x 30 Plano Mill, (2) x Vertical Heads, (2) x Horizontal Heads. S/No. 39920 (1967)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 15: ZDAS CDN 400 Straightening Press
ZDAS CDN 400 Straightening Press
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 16: MAS VRP84A Travelling Column Heavy Duty Radial Drill
MAS VRP84A Travelling Column Heavy Duty Radial Drill (159230002)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 16A: TOS SN55-71 Centre Lathe
TOS SN55-71 Centre Lathe
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 17: TOS SUS63 Lathe
TOS SUS63 Lathe
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 18: TOS SU50 Lathe
TOS SU50 Lathe
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 19: TOS FA58 Mill
TOS FA58 Mill
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 20: TOS FA58 Mill
TOS FA58 Mill
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 21: Large Slotter
Large Slotter, 700mm Table
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 22: Slotter
Slotter, 500mm Table
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 23: (2) Holroyd 5A Pump Rotor Milling Machines
(2) Holroyd 5A Pump Rotor Milling Machines
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 24: Air Liquide TPE4 Welding Positioner
Air Liquide TPE4 Welding Positioner. S/No. 372147 (2011)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 25: Air Liquide TPE4 Positioner
Air Liquide TPE4 Positioner. S/No. 372149 (2011)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 26: Air Liquide TPE2.5 Welding Positioner
Air Liquide TPE2.5 Welding Positioner. S/No. W372146 (2011)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 27: (4) x Kemper Maxific
(4) Kemper Maxific (2015)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 28: Bomar Ergonomic 320.250.DGS Bandsaw
Bomar Ergonomic 320.250.DGS Bandsaw. S/No. 659 (2006)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 29: Circle Cutter
Circle Cutter
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 30: Strojaren 3000 x 6.3mm Guillotine
Strojaren 3000 x 6.3mm Guillotine
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 31: Swisstool KU450 Corner Knotcher
Swisstool KU450 Corner Knotcher. S/No. 555 (1984)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 32: Small Powered Folder
Small Powered Folder
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 33: TOS XOM 3000 x 4B Folder
TOS XOM 3000 x 4B Folder. S/No. 0280883 (1968)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 34: Rotomatic Small Tank Turning Rolls
Rotomatic Small Tank Turning Rolls
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 35: Floor Plates
Floor Plates
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 36: Manual Paint & Wash Booth
Manual Paint & Wash Booth
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 37: Bismon Free Standing Crane System
Bismon Free Standing Crane System W/3 x 2.5t Bridges
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 38: Technowash Parts Washer
Technowash Parts Washer (1.77m diameter Basket)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 39: Nagel Vertical Hone
Nagel Vertical Hone
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 40: OTA 250 Challenger
OTA 250 Challenger with Fagor Control, Duplimatic Turret, 6” Chuck, Manual Gear Change (2008)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 41: Skoda SUT 126 Lathe
Skoda SUT 126 Lathe, NC x 6000mm, 1200mm Dia Chuck, 3-Way Bed, Power Tailstock, Steadies, Heavy Duty. S/No. 0b23169 (1987)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 42: Skoda SIU 250T Heavy Duty Centre Lathe
Skoda SIU 250T Heavy Duty Centre Lathe, 130000mm BC, 4-Way Bed, Internal Grinding Head, Miling/Drilling Head, 2500mm Dia Chuck, Steadies. S/No. 22730 (1985)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 43: Johnford Omnitechnique SL-80A 2-Axis CNC Lathe
Johnford Omnitechnique SL-80A 2-Axis CNC Lathe with Fanuc 21i-TB Control, Tailstock, 14" Chuck. S/No. TEJ10016 (2010)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 44: TOS BDU 250A Internal Grinder
TOS BDU 250A Internal Grinder. S/No. 14554 (1981)
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 45: TOS BHU 40/2000 Universal Grinder
TOS BHU 40/2000 Universal Grinder. S/No. 0237499
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 46: TOS BUT 63/2000 Cylindrical Grinder
TOS BUT 63/2000 Cylindrical Grinder. S/No. 0247175
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.
Los 47: TOS BPV 40 Vertical Spindle Reciprocating Table Surface Grinder
TOS BPV 40 Vertical Spindle Reciprocating Table Surface Grinder
Please Note: This lot is located in Prague, Czech Republic. Loading facilities are available, subject to meeting the required Health & Safety standards.