2011 - Due to the Retirement of the Director, Equipment previously used by B&B Engineering & Fabrication (Lancashire) & Others
Bidding Ends at 3.00pm (UK Time) Viewing by Appointment with the Auctioneer, please contact our office on: + 44 (0) 121 328 2424
Final Payment Date: 27th May 2011 at 17:00:00
Final Clearance Date: 16th June 2011 at 17:00:00
Location: These Items are located in Foulridge, Colne and Birmingham
Buyers Premium
Buyers Premium will be charged at 15%
VAT
Value added tax will be charged at 20%.
You must log in to be able to bid
Lots 1 to 60 of 75
Lot 200: Amada Arcade 210 Turret Punch
Amada Arcade 210 Turret Punch with Fanuc 16P CNC Control, Light Guards, 200KN Punching Force, 6.4mm Max. Sheet Thickness, 19 Toolstations, 88.9mm Max. Punching Diameter, Max. Working Area: 1000 x 1270mm,Max. Hit Rate: 480hpm, Max. Simultaneous Axis Speed: 70m/min, Min. Programmable Value: 0.01mm, Programmable Workchute: 600 x 400mm, Pneumatic X Axis Gauge Block, Hydraulic Clamps, 14" Colour NC Display . S/No. 210213 (1995)
Please Note: This Machine is located in Birmingham
Lot 201: Edwards 3.25/2500DD Guillotine
Edwards Model 3.25/2500DD Guillotine, Capacity: 2535mm x 3.25mm
Please Note: This Machine is located in Birmingham
Lot 202: Morgan Rushworth Box & Pan Folder
Morgan Rushworth Box & Pan Folder
Please Note: This Machine is located in Birmingham
Lot 203: SMC Rollformers Ltd Rollforming Machine
SMC Rollformers Ltd Rollforming Machine, Model No. 20S PITTS/RAF. S/No. 00130399
Please Note: This Machine is located in Birmingham
Lot 204: Flanger
Flanger, Model 16SP. S/No. W/8214/MB
Please Note: This Machine is located in Birmingham
Lot 205: XYZ SM3500 CNC Bed Mill
XYZ SM3500 CNC Bed Milling Machine with Prototrak SM Control, Table Size: 54" x 14" (2002)
Please Note: This Machine is located in Colne
Lot 206: XYZ 2000 Turret Mill
XYZ 2000 Turret Milling Machine with Newall D.R.O, Table Size: 50" x 10" (2004)
Please Note: This Machine is located in Colne
Lot 207: XYZ ProTurn 410 CNC Centre Lathe
XYZ ProTurn 410 CNC Centre Lathe, 1100mm between Centres, 420mm Swing over Bed, 75mm Spindle Bore (1990)
Please Note: This Machine is located in Colne
Lot 208: Loar Bendhor 30 Universal Horizontal Bender
Loar Bendhor-30 Universal Horizontal Bender, Capacity: 30-Ton (1998)
Please Note: This Machine is located in Colne
Lot 209: Emi-Mec Automatic Lathe
Emi-Mec Type Auto Sprint S Lathe, Front & Rear Double Top Slides, Bar Feed
Please Note: This Machine is located in Colne
Lot 210: Ward 7D Combination Turret Lathe
Ward 7D Combination Turret Lathe with Collet Chuck, 3-Jaw Chuck & Tooling
Please Note: This Machine is located in Colne
Lot 211: Ward 7DS Capstan Lathe
Ward 7DS Capstan Lathe with Collet Chuck, Bar Feed & Tooling
Please Note: This Machine is located in Colne
Lot 212: Ward 2DS Capstan Turret Lathe
Ward 2DS Capstan Turret Lathe with Collet Chuck & Tooling
Please Note: This Machine is located in Colne
Lot 213: Ward 2DS Capstan Turret Lathe
Ward 2DS Capstan Turret Lathe with Collet Chuck, Bar Feed & Tooling
Please Note: This Machine is located in Colne
Lot 214: Ward 3A Capstan Lathe
Ward 3A Capstan Lathe with Collet Chuck & Collets
Please Note: This Machine is located in Colne
Lot 215: Colchester Triumph 2000 Gap Bed Centre Lathe
Colchester Triumph 2000 Gap Bed Centre Lathe, 50" between Centres, 15" Swing over Bed
Please Note: This Machine is located in Colne
Lot 216: Bewo Cut Off Saw
Bewo Cut Off Saw with Material Conveyor
Please Note: This Machine is located in Colne
Lot 217: Pedrazzoli Brown 250 Cut Off Saw
Pedrazzoli Brown 250 Cut Off Saw
Please Note: This Machine is located in Colne
Lot 218: Fercell ECO2N Mobile Extraction Unit
Fercell Model ECO 2N Twin Head Mobile Extraction Unit (2003)
Please Note: This Machine is located in Colne
Lot 219: Archdale Pedestal Drill
Archdale Pedestal Drill with 34" x 16" Table & 2" 4 Morse Taper
Please Note: This Machine is located in Colne
Lot 220: Asquith OD1 4ft 6 Radial Arm Drill
Asquith Type OD1 4ft 6" Radial Arm Drill with Box Table Size: 33" x 42" x 20", 3" 5 Morse Taper & Safety Brake
Please Note: This Machine is located in Cheshire
Lot 221: Archdale LDR Radial Arm Drill
Archdale Type LDR 36" Radial Arm Drill with Rise & Fall Table Size: 32" x 19" & Safety Brake
Please Note: This Machine is located in Cheshire
Lot 222: A.N Welding Manipulator
A.N Type CW50 12" diameter Welding Manipulator, Single Phase
Please Note: This Machine is located in Colne
Lot 223: Power Guillotine
Power Guillotine, 48" Capacity
Please Note: This Machine is located in Colne
Lot 223A: Geka Model 80 Hydraulic Iron Worker
Geka Model 80/ Hydraulic Iron Worker, 80-Ton Capacity, Angle: 130mm x 130mm x 13mm, Cropping: 450mm x 15mm, Round & Square: 45mm
Please Note: This Machine is located in Cheshire
Lot 224: ABM T-Slotted Setting Table
ABM T-Slotted Setting Table - 48" x 48"
Please Note: This Machine is located in Colne
Lot 225: Cast Iron Surface Tables
Cast Iron Surface Table - 6ft x 3ft on top of another Cast Iron Surface Table - 70" x 33"
Please Note: This Machine is located in Colne
Lot 226: Vanco Vertical Linsher
Vanco 1" Vertical Flexiband Linisher
Please Note: This Machine is located in Colne
Lot 227: Vanco Vertical Linisher
Vanco 1" Vertical Flexiband Linisher
Please Note: This Machine is located in Colne
Lot 228: Vanco Model 44 Flexiband Linisher
Vanco Model 44 4" Flexiband Linisher
Please Note: This Machine is located in Colne
Lot 229: Samand Pedestal Tool Grinder
Samand Pedestal Tool Grinder with Diamond Wheel & Tilting Table
Please Note: This Machine is located in Colne
Lot 230: Brierley Drill Grinder
Brierley Type ZB25 Drill Grinder, 25mm Capacity
Please Note: This Machine is located in Colne
Lot 231: Archdale DG5P Pedestal Drill
Archdale DG5P Pedestal Drill Grinding Machine, 2" Capacity
Please Note: This Machine is located in Colne
Lot 232: Clarkson MK1 Tool and Cutter Grinder
Clarkson MK1 Tool & Cutter Grinder
Please Note: This Machine is located in Colne
Lot 233: KEF Double Ended Tool Grinder
KEF 8" Double Ended Tool Grinder
Please Note: This Machine is located in Colne
Lot 234: Clarke Air Compressor
Clarke Type SE250C210 Air Compressor, 150 PSI, Motor: 53.5HP
Please Note: This Machine is located in Colne
Lot 235: Parkson 2N Horizontal Milling Machine
Parkson Type 2N Horizontal Milling Machine, Table Size: 51" x 13"
Please Note: This Machine is located in Colne
Lot 236: Corona 3-Spindle Vertical Drill
Corona 3-Spindle Vertical Drill
Please Note: This Machine is located in Colne
Lot 237: Ormerod Vertical Slotting Machine
Ormerod Vertical Slotting Machine with 6" Stroke
Please Note: This Machine is located in Colne
Lot 238: Ajax Bench Drill
Ajax Bench Drill
Please Note: This Machine is located in Colne
Lot 239: Miracle Bender
Miracle Bender on Stand
Please Note: This Machine is located in Colne
Lot 240: Hilmor 2B Tube Bender
Hilmor Type 2B Manual Tube Bender
Please Note: This Machine is located in Colne
Lot 241: Bench Type Arbour Press
Bench Type Arbour Press, 12" Daylight, 4.5" Throat
Please Note: This Machine is located in Colne
Lot 242: Flypress
No. 2 Size Fly Press
Please Note: This Machine is located in Colne
Lot 243: Mobile Tool Trolleys
(2) Mobile Tool Trolleys
Please Note: This Machine is located in Colne
Lot 244: Andrews Portable Gas Heater
Andrews Model G260 Portable Gas Heater
Please Note: This Machine is located in Colne
Lot 245: Morris Chain Hoist
Morris Chain Hoist
Please Note: This Machine is located in Colne
Lot 246: Bench Top Cropper
Bench Top Cropper
Please Note: This Machine is located in Colne
Lot 247: Record 3VS Bench Vice
Record 3VS Bench Vice on Drill Base
Please Note: This Machine is located in Colne
Lot 248: Wolf Double Ended Buffing Machine
Wolf Double Ended Buffing Machine
Please Note: This Machine is located in Colne
Lot 249: Qty of Clamping Equipment
Qty of Clamping Equipment
Please Note: This Item is located in Colne
Lot 250: Qty of Lathe Tooling
Qty of Lathe Tooling
Please Note: This Item is located in Colne
Lot 251: Range of Metric Re-Coil Equipment
Range of Metric Re-Coil Equipment - M6, M8, M10 & M12
Please Note: This Item is located in Colne
Lot 252: Qty of Parallels
Qty of Parallels
Please Note: This Item is located in Colne
Lot 253: Harding Horizontal and Vertical Indexing Collet Fixture
Harding Horizontal and Vertical Indexing Collet Fixture
Please Note: This Item is located in Colne
Lot 254: Angle Plates, G-Clamps, Face Mills & Lathe Chucks
Angle Plates, G-Clamps, Face Mills & Lathe Chucks
Please Note: This Item is located in Colne
Lot 255: Eclipse Magnetic Chuck, Tilting Vice & Rack Vice
Eclipse 5" x 10" Magnetic Chuck with 5" Tilting Vice & 4" Rack Vice on Swivel Base
Please Note: This Item is located in Colne
Lot 256: Bench Centres
Bench Centres, 22" Max Distance between, 7" Max. Diameter, Adjustable 12" x 6" T-Slotted Angle Plate and Fixed Angle Plate
Please Note: This Item is located in Colne
Lot 257: Parallel Shank Collet Chucks and Cutter Arbours
Parallel Shank Collet Chucks and Cutter Arbours with Range of Horizontal Cutters
Please Note: This Item is located in Colne
Lot 258: Qty of Milling Cutters
Qty of Milling Cutters
Please Note: This Item is located in Colne
* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.