Please Note: This Machine is Located in Birmingham and is not part of the Express Engineering Equipment

Doosan Puma 700LM CNC Lathe with Fanuc Series 21i – TB Control, 610mm 3 Jaw Hydraulic Powergrip H C H 24 Chuck, 12 Station Turret with Driven Tool Facility, C Axis to Main Spindle, Tool eye, Tailstock, Swarf Conveyor. Swing Over Bed 1030mm, Swing Over Saddle 800mm, Max Turning dia 900mm. Recommended Turning dia 700mm, Maximum Turning Length 3,200mm, dia Through Draw Tube 164mm. Main Spindle Motor (Cont /30 mins) 37/45kw Max Spindle Speed 1,500 RPM. S/No 6OLMO526 (mfg 2007) First Installed 2008.

CME Model FS2 CNC Bed Mill with Heidenhain TNC i530M Control, Universal Head with 2.5 Degrees Automatic Control Indexing to each Axis Plain, Table Size: 2200mm x 850mm, Travels: X = 2000mm, Y = 1000mm, Z = 1000mm, Spindle Speeds: 4000rpm, Taper: ISO 50, Spindle Nose Table Top – Min: 100mm, Max: 1000mm, Main Motor 22kw. S/No. 312 (2005)

Please Note: This Item is located in Newcastle

HAAS Model EC1600–5D–EC Horizontal Machining Centre with HAAS CNC Control and Inbuilt Rotary Table, 5 Degree Position Indexing, Main Table: 1620mm x 910mm, Rotary Table: 750mm diameter, Travels: X = 1620mm, Y = 1016mm, Z= 800mm, Spindle Speeds: 6000rpm, Taper: BT50, Geared Headstock – 30H.P, 30 Position Toolchanger, Renishaw Spindle and Table Probing, High Pressure Thru Spindle Coolant, Swarf Conveyor. S/No 51734 (2006) Please Note: This Machine has had an upgrade to HAAS Control in 2008

Please Note: This Item is located in Newcastle

Hitachi Seiki Model HS 500 Twin Pallet Horizontal Machining Centre with Seicos Control, 10M Fanuc Drives, Pallet Sizes: 500mm x 500mm, 1 Degree Index, Travel s: X = 680mm, Y = 680mm, Z = 680mm, Spindle Speeds: 12,000rpm, Taper: 40 INT, 40-Position Toolchanger, Renishaw Tool Probe, Coolant. S/No. 98010 – 030 (1996)

Please Note: This Item is located in Newcastle

Deckel Maho Model DMC 103V Vertical Machining Centre with Heidenhain 426 Control, Table Size: 1200mm x 600mm, Travels: X = 1000mm, Y = 600mm, Z = 600mm, Spindle Speeds: 10,000rpm, Taper: BT 40, 24-Position Toolchanger, Coolant. S/No. 28860009562 (2001)

Please Note: This Item is located in Newcastle

Deckel Maho Model DMC 70 VS2 Twin Pallet Vertical Machining Centre with Heidenhain 426 Control, Pallet Sizes: 900mm x 550mm, Travels: X = 700mm, Y = 620mm, Z = 500mm, High Speed Spindle: 18000rpm, Taper: CAT 40, 24-Position Toolchanger, Coolant, Swarf Conveyor. S/No.28810008562 (2001)

Please Note: This Item is located in Newcastle

Deckel Maho Model DMC 70 VS2 Twin Pallet Vertical Machining Centre with Heidenhain 426 Control, Pallet Sizes: 900mm x 550mm, Travels: X = 700mm, Y = 620mm, Z = 500mm, High Speed Spindle: 18000rpm, Taper: CAT 40, 24-Position Toolchanger, Coolant, Swarf Conveyor. S/No 28810006262 (1997)

Please Note: This Item is located in Newcastle

Bridgeport Model VMC 600/22 Vertical Machining Centre with Heidenhain TNC 370 Control, Jones & Shipman 4th Axis Unit, Table Size: 800mm x 410mm, Travels: X = 600mm, Y= 410mm, Z = 520mm, Spindle Speeds: 6000rpm, Taper: 40 INT, 22-Position Toolchanger. S/No 720986 (1997)

Please Note: This Item is located in Newcastle

Sodick Model AQ55L Spark Eroder with Sodick LQ1 Control, Table Size: 750mm x 550mm, Travels: X = 500mm, Y = 400mm, Z = 300mm. S/No. 0023 (2003)
Please Note: This Item is located in Newcastle

Agie Cut Classic 3 Wire Eroder with Agie Control, 5 Axis XYZ + ABC, Workpiece Dimensions: 1050mm x 650mm x 250mm, Travels: X = 500mm, Y = 350mm, Z = 250mm, Power: 9kva. S/No. 0015 (1997)

Please Note: This Item is located in Newcastle

Agie Cut Model 250 HSS Wire Eroder with Agiematic CF Control, 5 Axis XYZ + ABC, Travels: X = 400mm, Y = 250mm, Z = 250mm, Power: 9.9 – 10.7 kva (15.4A) S/No. 181–006 (1994)

Please Note: This Item is located in Newcastle

Sodick Model K1C EDM Hole Drill, Table Size: 350mm x 250mm with X–Act SDS2 2-Axis Readout Control

Please Note: This Item is located in Newcastle

Hydrafeed Multifeed Model MX1B Magazine Barfeed, Capacity: 75mm dia, Mag Load Table Material Length: 1600mm. S/No 5974 (2007)

Please Note: This Item is located in Newcastle

Hydrafeed Multifeed Model MX1B Magazine Barfeed, Capacity: 75mm dia, Mag Load Table Material Length: 1600mm. S/No. 5043 (2001)

Please Note: This Item is located in Newcastle

Jones & Shipman Model 1074 EIU Universal Cylindrical Grinder, Capacity: 10” x 18” between Centres, Swing Round Internal, Table Swivel, Workhead Swivel, Workhead Speeds: 40 – 320rpm, Internal Spindle & Coolant. S/No.B014502 (1986)

Please Note: This Item is located in Newcastle

Jones & Shipman Model 1302 EIU Universal Cylindrical Grinder, Capacity: 12” x 24” between Centres, Swing Round Internal, Table Swivel, Workhead Swivel, Workhead Speeds: 40 – 320rpm, Internal Spindle, 125mm 3-Jaw Chuck, 350mm Faceplate, Fixed Steady, Table Dresser & Coolant. S/No. BO95585 (1986)

Please Note: This Item is located in Newcastle

Stefor Model RTB 10/5 Production Surface Grinder, Table Size: 1000mm x 500mm, Magnetic Chuck Size: 1000mm x 450mm, Wheel Diameter: 400mm with Overhead Dresser, Manual & Auto Cycle Control, Coolant

Please Note: This Item is located in Newcastle

Colchester Mastiff 1400 Conventional Cap Bed Centre Lathe, Swing Over Bed: 21”, Swing Over Cross Slide: Distance between Centres: 100”, Speeds: 18 – 1400rpm, Spindle Bore 3 ½ “, Quick Change Toolpost, Chucks, Newall 2-Axis D.R.O, Coolant, LV Light, 16” 3-Jaw Chuck, Fixed Steady & Gap Piece. S/No. 8-0207-06537

Please Note: This Item is located in Newcastle

Forte Model SBA 241 Twin Pillar Horizontal Automatic Bandsaw, Capacity: 250mm, Twin Vice Operation Feed, Carriage Length: 600mm, Variable Feeds & Speeds. S/No. 721606

Please Note: This Item is located in Newcastle

Fendo Model 250 AS Horizontal Automatic Bandsaw, Capacity: 250mm dia, Twin Vice Operation Feed, Carriage Length: 600mm, Screw Type Swarf Conveyor, Material Roller Support Stand: 600mm. S/No. 05LT04 (1997)

Please Note: This Item is located in Newcastle

Startrite Model 216H Vertical Bandsaw, Swivel Table with Power Feed, Table Size: 650mm x 650mm, Throat: 375mm. S/No. 22524

Please Note: This Item is located in Newcastle

Micro Tapping Machine, Model Meca Type 11 – G5, Speeds: 250 – 2200rpm, Spindle Travel: 80mm, Micro Tap Size M1.0 – M6, Metric 1S0 Standard. S/No 275121 (2007)

Please Note: This Item is located in Newcastle

Micro Tapping Machine, Model Mega – Tap – 11 – G8, Speeds: 300 – 3000rpm, Spindle Travel: 80mm, Micro Tap Size: M2 .5 – M8 Metric ISO Standard. S/No. 218133J (2001)

Please Note: This Item is located in Newcastle

Roscamatic Type 300 Tapping Arm on Metal Bench Top: 1200mm x 700mm with Kurtvice (6”) 150mm. S/No. 32

Please Note: This Item is located in Newcastle

Kandux Shadow Graph, Screen: 675mm x 675mm, Table Size: 800 x 160mm, 2-Axis D.R.O. S/No. KPI–354–67

Please Note: This Item is located in Newcastle

Sigmascope Shadow Graph, Screen: 1000mm Dia, Table Size: 625mm x 190mm with Centres, Lense Magnification: x 20, x 25, x 50, x 100 with Heidenhain 2-Axis D.R.O

Please Note: This Item is located in Newcastle

Trimos Model TF1 Horizontal Guage Calibration System, Granite Base Table Size: 1750mm x 600mm, Centres Capacity: 180mm Centre Height x 1000mm between Centres, Rear Centres Capacity: 100mm Centre Height x 1000mm between Centres. S/No. 222

Please Note: This Item is located in Newcastle

Wolpart Model 2RC Diameter Tester, Rockwell – Vickers Brinell Hardness Tester. S/No. 9034 (1978)

Please Note: This Item is located in Newcastle

Walther Trowal Model CD 200 Component Deburr Tumbler, Barrel diameter: 920mm (36”) with Wash Tank & Fittings. S/No. WTV 1744

Please Note: This Item is located in Newcastle

Guyson Model T40 Tumble Blast System, Cabinet Bowl dia: 500mm with Spare Bowel: 500mm dia and Extraction Unit. S/No. 802917 (2002)

Please Note: This Item is located in Newcastle

Aquablast Model 915 Cabinet, 600mm x 900mm x 800mm High

Please Note: This Item is located in Newcastle

Clemco Blast Cabinet

Please Note: This Item is not in working order, for parts only, sold as is

Please Note: This Item is located in Newcastle

Marrutt Oven, Cabinet Size: 500mm x 500mm x 750mm, High Oven Temperatures, Level 1 = 62 Degrees, Level 2 = 90 Degrees

Please Note: This Item is located in Newcastle

Carbolite Furnace, Type BT2, Max. Temperature: 1200 Degrees. S/No. 74544

Please Note: This Item is located in Newcastle

Fork Lift Cage, Operator Platform: 900mm x 900mm, Safety Rails: 1000mm High

Please Note: This Item is located in Newcastle

Clarke Strongarm Model CFC 500F Hand Hydraulic Lift Crane, Max Lift Height: 1890mm, Lift Capacity: Stage 1 = 500kg, Stage 2 = 350kg, Stage 3 = 250kg, Stage 4 = 150kg. S/No. 03P-2697

Please Note: This Item is located in Newcastle

Python Cranes Jib Crane with Electric Hoist 300kg, Pillar 3.7m (h), Jib: 3.5m, Donati Hoist 300kg Electric Operation. S/No. 014683

Please Note: This Item is located in Newcastle

Demag Jib Crane with Electric Hoist 80kg, Pillar 3.4m (h), Jib: 2m, Demag Hoist 80kg Electric Operation. S/No. 61925227

Please Note: This Item is located in Newcastle

Extractor Unit, Type OEN3000. S/No. 202697 (2001)

Please Note: This Item is located in Newcastle