Automated Fishing Bait Boilie Line with Stainless Steel Eurobin Lifter for adding Dough into the Extruder, Steel Safety Caging and Safety Interlock Platform, (2) x Eurobins allow filling in Batches, Kilia Extruder capable of large outputs, features additional Guarding on the top of the Extruder to ensure safety with use of the Eurobin Lifter. Extruder Serviced Bait Tools Rolling Machine, which forms Dough Balls in sizes between 12 and 24mm (additional options of sizes available from Manufacturer) built in Cut-off for Waste Dough to be re-used and reduce need for Manual Monitoring, Dual Direction PVC Infeed Belt ensure less marking of product in Soft Dough Stage products then move to the Boiler Unit. This has Variable Speed Belt and PLC Connection to Gas System for Timing and Temperature Regulation. All automated and capable of maintaining High Infeed Dough Quantity, Post Cook Outfeed Perforated Belt with 6 Fans Array for increased drying of product, Belt can be varied in speed to suit requirement, Belt terminates into Cassette Tray Filler. Fills to required weights of 9kg (this is variable) further Array of Fans below Tray Drying Line to further dry the products. Machine capable at highest rate 600kg per hour of Finished Products, Waste Quantity when set up correctly yields less than 0.5%.

10 Bin Food Grade Multi Head Filling Machine complete with Loading Hopper with 300kg Capacity, Hopper feeds Bucket Elevate on Machine demand and applies product into Multihead Bins to service Doypack Machines. Can be set up on dual floors (as pictured) or utilise Tower Framework. All Multihead Bins are serviceable and can be cleaned down, PLC Controls allow programming both in Multihead Element but also on the Doypack Machines.

Doypack 410 Filler with Pouch Cassette to Infeed Open, Fill and Seal Pouch, Capable of 5kg Size Pouches, 600kg in 15 Minutes, capable of consistent weights within 2-3 grams depending on the product type.

Doypack 210 Filler with Pouch Cassette to Infeed Open, Fill and Seal Pouch, capable of 200g - 1kg Size Pouches, 1000kg in 1 Hour, capable of consistent weights within 2-3 grams depending on the product type.

1200mm Stainless Steel Mobile Rotary Collecting Table 240 Volt with 380mm Mobile Conveyor, 240 Volt

Combination of lots 2, 2A, 2B, 2C

Lot 2 - 10 Bin Food Grade Multi Head Filling Machine complete with Loading Hopper with 300kg Capacity, Hopper feeds Bucket Elevate on Machine demand and applies product into Multihead Bins to service Doypack Machines. Can be set up on dual floors (as pictured) or utilise Tower Framework. All Multihead Bins are serviceable and can be cleaned down, PLC Controls allow programming both in Multihead Element but also on the Doypack Machines.

Lot 2A - Doypack 410 Filler with Pouch Cassette to Infeed Open, Fill and Seal Pouch, Capable of 5kg Size Pouches, 600kg in 15 Minutes, capable of consistent weights within 2-3 grams depending on the product type.

Lot 2B - Doypack 210 Filler with Pouch Cassette to Infeed Open, Fill and Seal Pouch, capable of 200g - 1kg Size Pouches, 1000kg in 1 Hour, capable of consistent weights within 2-3 grams depending on the product type.

Lot 2C - 1200mm Stainless Steel Mobile Rotary Collecting Table 240 Volt with 380mm Mobile Conveyor, 240 Volt

Bell-Mark Thermal Printer RF Pouch Printer, Type East Print 111 128, Model No. EP41015R, prints full rear bag artwork including barcodes to clear scannable quality. S/No. 20572763 (2020)

Mecnosud Spiral Mixer Model SP200R, Mixing Bowl Size, 900mm Width 500mm Depth. S/No. 2002247 (2020)

Mecnosud Spiral Mixer Model SP200R, Mixing Bowl Size, 900mm Width 500mm Depth. S/No. 2002246 (2020)

Mecnosud Spiral Mixer Model SP200R, Mixing Bowl Size, 900mm Width 500mm Depth. S/No. SP200R-015 (2018)

Maxima MSM 130 Spiral Mixer, Mixing Bowl Size 700mm, 350mm Depth. S/No. MSM 30 - 010 (2017)

Large Capacity Mixing Hopper with Weintek Touch Control, Max Capacity 1800kg, PLC allows monitoring of capacity of raw product and allows dosing. Auger dosing unit applies required powder quantity to mixing area. Further customisation possible in the PLC with the inclusion of liquid dosing element.

Large capacity 1000kg Ribbon Blender with sealed lid and emptying hatch at the base for dropping products into tote bins. Three phase power required.

750kg stainless steel Ribbon Blender with sealed lid and emptying hatch at the base for dropping products into eurobin or similar, three phase power, easy to clean and maintain. 

Sack weighing Tote Bin capacity of 1 tonne of flour that services lower machine areas allowing user to weigh 25kg hessian style sacks to required height. 

Milling Machine for grinding products to powder, fully stainless steel, Type PSJ. S/No. 2002 (1992)

Hammer Milling Machine, simple low scale Milling Machine for grinding products to powder, pour into the hopper and a product falls through outfeed into bag or bucket for collection. 

Orbital Drying Conveyor, 580mm x 280mm

Orbital Drying Conveyor 650mm x 2m

Mobile Conveyor with Hopper and Bag Weigher, PCE-SD Series Scale, Max 30kg, Hopper Size 1433mm x 860mm x 550mm Depth, Conveyor Width 200mm, Length 280mm, 170mm

Doselite Bottle Filling Machine with perspex guarding for containing smells, piston set-up allows product to be accurate with the machine capable of products between 50ml to 250ml, hand fed and filled, easy to clean and maintain thanks to simple design. 

Bottle Capping Machine for use on inline belt, capper can be adjustable to wide array of sizes, cap is added manually and the capper turns to torque requirement.

Combination of Lots 17 & 17A

Lot 17 - Doselite Bottle Filling Machine with perspex guarding for containing smells, piston set-up allows product to be accurate with the machine capable of products between 50ml to 250ml, hand fed and filled, easy to clean and maintain thanks to simple design. 

Lot 17A - Bottle Capping Machine for use on inline belt, capper can be adjustable to wide array of sizes, cap is added manually and the capper turns to torque requirement.

Stainless Steel Table 2320mm x 650mm x 840mm

Stainless Steel Table 2000mm x 700mm x 860mm

Stainless Steel Table 1500mm x 600mm x 820mm

Stainless Steel Table 2000mm x 700mm x 860mm

Stainless Steel Table 1990mm x 600mm x 840mm

Stainless Steel Material Hopper 1130mm x 1320mm x 1370mm Approx.

Stainless Steel Material Hopper 1080mm x 1220mm x 1430mm Approx.

Stainless Steel Material Hopper 1320mm x 1130mm x 1420mm Approx.

Adexa Meat Mincer Model HFM-32 for mincing meat for commercial kitchen use in the food industry, easy to clean and maintain. S/No. 21HL7063-505 (2021)

Adexa Meat Mincer Model HFM-32 for mincing meat for commercial kitchen use in the food industry, easy to clean and maintain. S/No. 21HL7063-506 (2021)

(6) x Impulse Hand Sealers

(2) x Vevor Bag Sealers

Qty of Small Scales Min 20g, Max 6kg

Qty of Small Scales Min 20g, Max 15kg

Dahle Hand Guillotine

Extraction Unit with Filter System, Type Centrifugal. S/No. 24846

(6) x Bays of Racking 2870mm x 890mm x 3960mm Approx.

(2) x Bays of Racking 2800mm x 900mm x 6100mm High Approx., (2) x Bays of Racking 1450mm x 900mm x 6100mm High Approx., (1) x Bay of Racking 2800mm x 900mm x 6100mm High Approx. Excluding Contents

(3) x Bays of Racking 1500mm x 900mm x 2450mm High Approx. Excluding Contents, (4) x Bays of Racking 2800mm x 900mm x 2450mm High Approx, Excluding Contents

Qty of Probe Lockers

Coshh Safety Store, Excluding Contents

Qty of 200 Plastic Trays 600mm x 400mm x 110mm

Qty of 200 Plastic Trays 600mm x 400mm x 110mm

Qty of 200 Plastic Trays 600mm x 400mm x 110mm

Qty of 200 Plastic Trays 600mm x 400mm x 110mm

Qty of 200 Plastic Trays 600mm x 400mm x 110mm

Qty of 200 Plastic Trays 600mm x 400mm x 110mm

Qty of 200 Plastic Trays 600mm x 400mm x 110mm

Qty of 200 Plastic Trays 600mm x 400mm x 110mm

Qty of 200 Plastic Trays 600mm x 400mm x 110mm

Kaeser SM 15T Compressor Part No. 100745.11, Max Pressure 16 Bar. S/No. 1017

Kaeser SM16T Compressor, Max Pressure 8 Bar with Air Receiver. S/No. 1197-7188726 (2019)