Mazak Nexus 5000 - II Horizontal Machining Centre with Mazatrol Matrix Nexus Control, Twin Pallet, Z Travel 740mm, X Travel 730mm, Y Travel 730mm, Pallet Size 500mm x 500mm, Max Work Diameter 800mm, Max Work Height 1000mm, Max Work Height 1000mm, Max Work Mass 700kg, 80 Station ATC. S/No. 192133 (2007) (No Tooling Supplied with Machine) Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Haas VF4SS Machining Centre with Haas Control, X Travel 1270mm, Y Travel 508mm, Z Travel 635mm, Table Size 1320mm x 480mm, 30 Station ATC, BT40 Taper, Spindle Speed 12,000rpm. S/No. 01/2019 (No Tooling) Country of Origin: U.S.A.

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Haas VF4SS Machining Centre with Haas Control, X Travel 1270mm, Y Travel 508mm, Z Travel 635mm, Table Size 1320mm x 480mm, 30 Station ATC, BT40 Taper, Spindle Speed 12,000rpm. S/No. 1146779 (2018) (No Tooling). Country of Origin: U.S.A.

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Haas VF4SS Machining Centre with Haas Control, X Travel 1270mm, Y Travel 508mm, Z Travel 635mm, Table Size 1320mm x 480mm, 24 Station ATC, BT40 Taper, Spindle Speed 12,000rpm. S/No. 1136450 (02/2017) (No Tooling). Country of Origin: U.S.A.

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Haas VF4SS Machining Centre with Haas Control, X Travel 1270mm, Y Travel 508mm, Z Travel 635mm, Table Size 1320mm x 480mm, 24 Station ATC, BT40 Taper, Spindle Speed 12,000rpm. S/No. 1104201 (05/2013) (No Tooling). Country of Origin: U.S.A.

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Haas Super VF4 Machining Centre with Haas Control, Spindle Speed 12,000rpm, 24 Station ATC, Table Size 1320mm x 460mm, BT40 Taper, X Travel 1270mm, Y Travel 508mm, Z Travel 635mm, Model VF-4 SSCE. S/No. 1073143. S/No. 1073143 (02/09). Country of Origin: U.S.A.

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Kitamura Mycentre H250 Horizontal Milling Machine with Yasnac Control, Twin Pallet, Pallet Size 254mm x 254mm, X Travel 305mm, Y Travel 305mm, Z Travel 330mm, 4th Axis Travel Rotary Table, 0 - 360 degrees (0.001 Degrees Incr.), Spindle Speed 8,000rpm, BT30 Taper, 16 Station ATC. S/No. 81056 (No Tooling). Country of Origin: Japan

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bridgeport VMC 1000 30 Machining Centre with Heidenhain TNC 426/430 PB Control, BT40 Taper, Table Size 1150mm x 490mm, 30 Station ATC, Spindle Speed 6,000rpm, Swarf Conveyor, X Travel 1020mm, Y Travel 510mm, Z Travel 500mm (No Tooling). S/No. 721096 (09/1997). Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Filtermist F28/8. S/No. 8/23913

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 9 & 9A

Lot 9 - Bridgeport VMC 1000 30 Machining Centre with Heidenhain TNC 426/430 PB Control, BT40 Taper, Table Size 1150mm x 490mm, 30 Station ATC, Spindle Speed 6,000rpm, Swarf Conveyor, X Travel 1020mm, Y Travel 510mm, Z Travel 500mm (No Tooling). S/No. 721096 (09/1997). Country of Origin: United Kingdom

Lot 9A - Filtermist F28/8. S/No. 8/23913

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bridgeport VMC 800 XP Machining Centre with Heidenhain 426/430M Control, Table Size 1000mm x 490mm, 22 Station ATC, BT40 Taper, X Travel 800mm, Y Travel 510mm, Z Travel 510mm, S/No. 723014 (03/2001) (No Tooling). Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bridgeport VMC 600 22 Digital Vertical Machining Centre with Heidenhain TNC 410 Control, 22 Station ATC, X Travel 600mm, Y Travel 410mm, Z Travel 520mm, BT40 Taper, Spindle Speed 6,000rpm. (08/1998). S/No. 721935 (No Tooling). Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bridgeport VMC 600 22 Vertical Machining Centre with Heidenhain Bridgeport TNC 370 Control, Table Size 840mm x 420mm, 22 Station ATC, X Travel 600mm, Y Travel 410mm, Z Travel 520mm, BT40 Taper, Spindle Speed 6,000rpm. S/No. 721296 (03/1998) (No Tooling). Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bridgeport VMC 600X Vertical Machining Centre with Heidenhain Bridgeport TNC 246268 02 Control, Table Size 840mm x 420mm, 22 Station ATC, X Travel 600mm, Y Travel 410mm, Z Travel 520mm, BT40 Taper. S/No. 950630 (11/2002). Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bridgeport VMC600 22 Digital Vertical Machining Centre with Heidenhain TNC 426/430PB Control, 22 Station ATC, Table Size 840mm x 420mm, Spindle Speed 6,000rpm, X Travel 600mm, Y Travel 410mm, Z Travel 520mm, BT40 Taper. S/No. 722361 (11/99). Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bridgeport VMC 500 16 Digital Vertical Machining Centre with Heidenhain TNC410 MA Control, 16 Station ATC, Table Size 840mm x 360mm, X Travel 500mm, Y Travel 340mm, Z Travel 520mm, BT40 Taper, Spindle Speed 7,000rpm. S/No. 950336 (07/2000) (No Tooling). Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bridgeport VMC500 16 Vertical Machining Centre with Heidenhain Bridgeport TNC370 Control, 16 Station ATC, BT40 Taper, X Travel 500mm, Y Travel 340mm, Z Travel 520mm, Spindle Speed 7,000rpm. S/No. 721091 (10/97) (No Tooling) with Nikken 4th Axis Unit Model CNC-201. S/No. 1369 (1997). Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bridgeport VMC500 16 Vertical Machining Centre with Heidenhain TNC 370 Control, Table Size 840mm x 360mm, 16 Station ATC, X Travel 500mm, Y Travel 340mm, Z Travel 520mm, Spindle Speed 7,000rpm, BT40 Taper. S/No. 950003 (11/1996) (No Tooling). Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bridgeport VMC500 16 Vertical Machining Centre with Heidenhain 370 Control, Table Size 840mm x 360mm, 16 Station ATC, X Travel 500mm, Y Travel 340mm, Z Travel 520mm, Spindle Speed 7,000rpm, BT40 Taper. S/No. 721092 (10/97). Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mazak Super Quickturn 18MS Mark II CNC Lathe with Mazatrol T Plus Control, Twin Spindle, 10" 3 Jaw Chuck, 7" 3 Jaw Chuck, Tooleye, Parts Catcher, Swarf Conveyor, 12 Station Turret, Model SQT-18MS. S/No. 135269 (1998) (No Tooling). Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mazak Super Quickturn 10M CNC Lathe with Mazatrol T Plus Control, 12 Station Turret, 7" 3 Jaw Chuck, Tooleye, Parts Catcher, Swarf Conveyor, Powered Tailstock, Model SQT-10M. S/No. 136816 (1998) (No Tooling) with IEMCA VIP70 CNC Barfeed. S/No. 98090705 (1998) (Possible Spares or Repair). Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Charmilles Robofil 310 Wire Eroder, X Travel 400mm, Y Travel 250mm, Z Travel 400mm, U Travel 400mm, V Travel 250mm, Wire 0.1 - 0.3mm with Chiller. S/No. 6.2376/355040. Country of Origin: Switzerland

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Charmilles Form 2 - LC Spark Erosion Machine with Anilam Wizard 211 DRO, X Travel 300mm, Y Travel 200mm, Z Travel 200mm, Table Size 500mm x 350mm, System 3R. S/No. 9564035 (1995). Country of Origin: Switzerland

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Volvo V90 D4 Estate Automatic, 1969 Engine, Diesel, Wheel Plan 2 Axle Rigid Body. Registration: LF18 PGV

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Startrite 20RWF Vertical Bandsaw, Table Size 520mm x 520mm. S/No. 79033, Welding Unit. Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Chunjei CB-250W Horizontal Bandsaw. S/No. CJ-77063 (05/2006), Automatic Clamping, Swarf Screw, Automatic Barfeed. Country of Origin: Taiwan

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Myford Super 7 Minature Lathe S/No. 120598, 100mm 3 Jaw Chuck, 90mm Over Bed, 380mm Distance Between Centres, (2) x Spare 3 Jaw Chucks

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Sweeney & Blocksidge Fly Press, 200mm Opening, 25m Spigot, T-slot Plate, Hunton Universal Bolster Outfit

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Startrite Mercury Pillar Drill S/No. 81293, 5 Speed, Ranging from 530 - 3830, Jacobs No. 33 Chuck, 240V, Table Size 220mm x 220mm. Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Startrite Mercury Pillar Drill. S/No.82075 5 Speed Ranging from 530 - 3830, Jacobs No. 6A Chuck, 240V, Table Size 220mm x 220mm. Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Meddings Pillar Drill Model L1/B. S/No. 537091 (10/03), Table Size 300mm x 300mm. Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Microtap II Jobtap G5 240V, Machine No. 225139J, MO.5 - M3, Spindle Travel Max 65mm, Reachable Thread Depth 45mm, Table Size 190mm x 190mm. Country of Origin: Germany

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Microtap 90 240V, Model 90G1. S/No. 20391 (1992). Country of Origin: Germany

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Microtap 90 240V Model 90G1. S/No. 20613 (1994). Country of Origin: Germany

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Quantum 4 CMM CNC 8105 Renishaw MH20i Probe. S/No. 2170918, 950mm x 1150mm Working Area, Overall Bed Size 1500mm x 1170mm, Height Under Probe 500mm. Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

QCT Quantum 664 CMM Renishaw MH20I Probe, 900mm x 800mm Working Area, Height Under Probe 350mm, Overall Bed Size 1600mm x 960mm. S/No. 4700506. Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mitutoyo PJ-A3000 Shadowgraph Profile Projector S/No. 590163 with Mitutoyo QM Data 200 DRO, 100mm x 100mm. Country of Origin: Japan

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Kosakalab Surf-Corder SE1200 Surface Roughness Measuring Instrument, Model DR25X11. S/No. MEX06345-14. Country of Origin: Japan

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Vision SX25 Microscope with Built-in Dimable Ring Light 10 x Zoom, Fully Adjustable. Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Vision SX25 Microscope with Built-in Dimable Ring Light 10 x Zoom, Fully Adjustable

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Microscope 10 x Magnification with Ringlight

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Microscope 10 x Magnification with Ringlight

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Microscope 10 x Magnification with Ringlight

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Otec CF2X18 Rumbler / Deburrer. Machine No. 218/01 0231 (2001)

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Ultrasonic Parts Washer Heated

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Vixen Jetwash 60 Parts Cleaner. S/No. 1589 (2003). Country of Origin: United Kingdom

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Nikken BT40-NX5 Spindle Speed Increaser Ratio x 5 In Box with Collets and Spanner

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Nikken BT40-NX5, Spindle Speed Increaser, Ratio x 5, in Box with Collets and Spanner

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty 32 ER16 Collet, Spindle Tools in Wooden Storage Rack

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

BT40 ER 16 and ER 25, Collet Spindle Tools in Wooden Storage Rack, Qty 16 x ER16, Qty 16 x ER25

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty 32 BT40 ER25 Collet Spindle Tools in Wooden Storage Rack

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

BT40 Qty 25 x ER16 and Qty 7 x ER25 Collet Spindle Tools in Wooden Storage Rack

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty 24 BT40 ER16 Collet Spindle Tools

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

BT40 Sidelock Spindle Tools

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty 25 x BT40 ER32 Collet Spindle Tools

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty 17 x BT40 Face Mill Adaptors with Various Face Mills

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty 4 x BT40 ER40 Collets Spindle Tools with Selection of Collets

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

ER25 Collets, Various Sizes

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

ER32 Collets, Various Sizes

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

ER16 Collets, Various Sizes

Please Note: This lot is located in Bradford, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.