Hyundai Wia KBN 135C Horizontal Boring & Drilling Machine with Fanuc Control. S/No. 63215-0084 (2017) with 5 Axis, Table Size 2000 x 1800mm, Spindle Range 3-2000 RPM, Spindle Taper BT50, 40 ATC, Jet Master MSHC 20 P15LT Filtration, Spindle Chiller, Swarf Conveyor, Guarding.

                                              SOLD 

                              PRE-AUCTION OFFER AGREED

Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Floor Bolted Overhead Double Bay Gantry Crane System, to include Demag 5ton & 3ton Pendant, Remote Operated Hoist on Crossbeam 10m Wide and 10t Double Beam Gantry Crane in 2nd Bay Width 9.9m Wide

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various BT50 Spindle Tool Holders used on Hyundai KBN-135C Horizontal Machining Centre

                                               SOLD
                             PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lenzkes Work Holding Clamping and Chain Strapping with Vee Blocks

                                                SOLD
                              PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various BT50 Spindle Boring Heads and Extension Pieces used on Hyundai KBN-135C Horizontal Machining Centre

                                              SOLD
                           PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(2) x Steel Fabricated Angle Plates, Size 765mm x 2000mm High, M20 Thread Holes on 100mm Pitch Centres, Including Bed Spacer Feet

                                             SOLD
                           PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Cogsdill MBT50-SP-SK50-0, Valve Seat Pocket Spindle Tool used on Hyundai Horizontal Borer, Type MBT50 Single Slide Head. S/No. Wo.48457

                                              SOLD
                            PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Cogsdill ZX300-TC-SK 50-0,ZX300 Facing and Generating Spindle Head with Spacer Collar. S/No. Wo.52425

                                            SOLD
                           PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Cogsdill MBT100-SP-SK50-0, MBT100 Single Slide Spindle Head. S/No. Wo.52411

                                                 SOLD
                            PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 1 - 1G

Lot 1 - Hyundai Wia KBN 135C Horizontal Boring & Drilling Machine with Fanuc Control. S/No. 63215-0084 (2017) with 5 Axis, Table Size 2000 x 1800mm, Spindle Range 3-2000 RPM, Spindle Taper BT50, 40 ATC, Jet Master MSHC 20 P15LT Filtration, Spindle Chiller, Swarf Conveyor, Guarding.

Lot 1A - Various BT50 Spindle Tool Holders used on Hyundai KBN-135C Horizontal Machining Centre

Lot 1B - Lenzkes Work Holding Clamping and Chain Strapping with Vee Blocks

Lot 1C - Various BT50 Spindle Boring Heads and Extension Pieces used on Hyundai KBN-135C Horizontal Machining Centre

Lot 1D - (2) x Steel Fabricated Angle Plates, Size 765mm x 2000mm High, M20 Thread Holes on 100mm Pitch Centres, Including Bed Spacer Feet

Lot 1E - Cogsdill MBT50-SP-SK50-0, Valve Seat Pocket Spindle Tool used on Hyundai Horizontal Borer, Type MBT50 Single Slide Head. S/No. Wo.48457

Lot 1F - Cogsdill ZX300-TC-SK 50-0,ZX300 Facing and Generating Spindle Head with Spacer Collar. S/No. Wo.52425

Lot 1G - Cogsdill MBT100-SP-SK50-0, MBT100 Single Slide Spindle Head. S/No. Wo.52411

                                               SOLD
                             PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Doosan Puma VTS1620M Lathe with Fanuc i-series Control. S/No. MT0038-000084 (2014) Various Fixed Turning and BT50 Spindle Tooling from Doosan VTS1620m Vertical Lathe, Including Various Chuck Jaws

                                             SOLD
                         PRE-AUCTION OFFER AGREED

Location: This lot is located in East Kilbride, Scotland. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Driven and Fixed Spindle Tooling from Doosan VTS 1620m Vertical Lathe, Including New and Used Soft Jaws for Chuck

                                                SOLD
                             PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 2 & 2A

Lot 2 - Doosan Puma VTS1620M Lathe with Fanuc i-series Control. S/No. MT0038-000084 (2014) Various Fixed Turning and BT50 Spindle Tooling from Doosan VTS1620m Vertical Lathe, Including Various Chuck Jaws

Lot 2A - Driven and Fixed Spindle Tooling from Doosan VTS 1620m Vertical Lathe, Including New and Used Soft Jaws for Chuck

                                                SOLD
                             PRE-AUCTION OFFER AGREED

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Floor Standing Overhead Crane Demag 10ton, Pendant Control, Approx. Span Width 15m x 20m Length Down Shop O/H1. All Upright and Downshop Steel Included.

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Floor Standing Overhead Crane 1600kg with Euro Chain VL10 Hoist. All Upright and Downshop Steel Included.

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Floor Standing Overhead Crane 5ton, Pendant Control. O/H7. All Upright and Downshop Steel Included.

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Jib Crane 1000kg Electric Hoist, Pendant Control 3000mm Arm

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Jib Crane 1000kg Morris SX3 Electric Hoist, Pendant Control 3500mm Arm

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Test Bay PR2 - Bay 2 with Hydraulic Test and Flush Rig System, HYD Pressure Test 20,000 PSI - Flush 6000 PSI plus Nitrogen Gas Bank 12 Cylinders, Cylmich BOC

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Test Bay PR2 - Bay 1 with (2) x HYD Piston Pumps, (1) x 30,000 PSI, (1) x 15,000 PSI, (1) x Fluid Tank, (3) x Gas Test Tanks plus Thermatron PR-CH-5-5-EC Test Rig, Heat and Cooling Test System. S/No. 39238 (2008)

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Small Air Lift Rotating Table Size 910mm x 755mm

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various Boring Heads, Clamp Stops and Vee Blocks as used on Giddings & Lewis Borer

Please Note: This lot is located in East Kilbride, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.