Matsuura MAM72-3VS 5 Axis Multi Pallet Machining Centre (2004) with Fanuc G-Tech 16I Control, Traverses X Y Z; 680 x 394 x 625mm, B Axis -110/+ 65 Degrees, C Axis 0.001 Degrees, Pallet Diameter 130mm, Maximum Workpiece Diameter 300mm, Maximum Workpiece Height 300mm, Number of Pallets 40, Spindle Taper BT40, 240 Station ATC, Spindle Speed 12000rpm, Through Spindle Coolant, Swarf Conveyor. Country of Origin: Japan

Please Note: This lot is located in Leicester, UK. A charge of £500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Haas VM-6 Mouldmaker Vertical Machining Centre (2012) with Haas Control, Traverses X Y Z 1626 x 813 x 762mm, Table Size 1626 x 711mm, Table Load 4,000 Lbs, Spindle Nose to Table 102-864mm, Spindle Speed 12,000rpm, 30 Hp Motor, 30 ATC, Through Spindle Coolant, Swarf Auger, 4th Axis Interface. Country of Origin: U.S.A.

Please Note: This lot is located in Leicester, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Haas DS-30 CNC Lathe with Sub-Spindle (2011) Swing 806mm, Swing Over Cross Slide 527mm, Maximum Cutting Diameter 406mm, 660mm Maximum Cutting Length, 51mm Bar Capacity Main Spindle, 30Hp Spindle Motor, 4,000rpm Main Spindle Speed, Sub-Spindle Speed 4,000rpm, 20Hp Power, 12 Station Turret, Swarf Conveyor, Tool Setter, Coolant. Country of Origin: U.S.A.

Please Note: This lot is located in Leicester, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

HAAS TL-2 CNC Toolroom Lathe (2007) 405mm Max. Cutting Diameter, 279mm Swing Over the Cross Slide, 1219mm Distance Between Centres, 2000rpm Spindle, 76.2mm Bar Capacity, 8.9kw Spindle Motor, HAAS Control, Tailstock, 254mm Chuck, Coolant. Country of Origin: U.S.A.

Please Note: This lot is located in Leicester, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mazak SQT250MS CNC Lathe with Mazatrol 640T Fusion Control, C Axis, Milling Sub-Spindle with GL100 Robot Loader (2001), Maximum Machining Diameter 350mm, Maximum Machining Length 483mm, Bar Capacity 64mm, Spindle Speed 4,000rpm, Spindle Power 26kw, Milling Speed 4,500rpm, Milling Power 10kw, Sub-Spindle Speed 4,000rpm, Sub-Spindle Power 5.5Kw, 12 Station Turret, Swarf Conveyor, Parts Catcher, Tool Setter, 3 Jaw Chucks on Both Spindles, Turret Tool Holders as Per Photos, Including One Off Radial Driven Tool Holder. Country of Origin: United Kingdom

Please Note: This lot is located in Leicester, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Hurco VMX64T Vertical Machining Centre (2007) Traverses X Y Z: 1625 x 860 x 760mm, Table 1676 X 889mm, Spindle Speed 12,000 rpm, Spindle Taper SK40, 40 ATC, Hurco Ultimax Control, 15kw Spindle Power, Through Spindle Coolant, Low Volt Light. Country of Origin: Taiwan

Please Note: This lot is located in Leicester, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mori Seiki MT2000A1SZ Multi Axis CNC Lathe (2005) 548mm Max. Machining Diameter, 1018mm Max Turning Length, 4500rpm Main Spindle, 6000rpm Sub Spindle, 65mm Bar Capacity, 40 Station ATC, 8000rpm Milling @ 10hp, 20hp Spindle Motors, Mori MSG501 Control, 250mm & 200mm 3 Jaw Power Chucks, Tool Setter, Swarf Conveyor, Coolant. Country of Origin: Japan

Please Note: This lot is located in Leicester, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Ort RP10C Thread Rolling Machine, Minimum Workpiece Diameter 2mm, Maximum Workpiece Diameter 30mm, Maximum Length of Plunge Feed 65mm, Maximum Length of Through Feed Unlimited, Maximum Pitch 2.5mm, Minimum Roller Diameter 85mm, Maximum Roller Diameter 135mm, Input 5,5Hp, Siemens “Touch” Control, Refurbished Rolls.

Please Note: This lot is located in Leicester, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Dominion Planer Thicknesser Machine. Country of Origin: United Kingdom

Please Note: This lot is located in Leicester, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

HPC ASK35 Compressor (2006) 8 Bar, 22kW

Please Note: This lot is located in Leicester, UK. A charge of £60 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Hiross Polair Refrigeration Dryer. S/No. 1308600001. Country of Origin: Italy

Please Note: This lot is located in Leicester, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

HPC ASK35 Compressor (2005) 8 Bar, 22kW. Country of Origin: Germany

Please Note: This lot is located in Leicester, UK. A charge of £60 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Hiross Polair Refrigeration Dryer. S/No. 12051800003. Country of Origin: Italy

Please Note: This lot is located in Leicester, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Startrite 18-T-10 Vertical Bandsaw

Please Note: This lot is located in Leicester, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Aligator Model 370A Auto Bandsaw (2011)

Please Note: This lot is located in Leicester, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Kryle VMC500 Vertical Machining Centre (1995) with Fanuc 0M Control. Country of Origin: United Kingdom

Please Note: This lot is located in Leicester, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

KMT MC500P Vertical Machining Centre with Fanuc OM control, Tool changer

Please Note: This lot is located in Leicester, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Charmilles Robofil 290 Wire Cutting Machine, Chiller, Manuals. Country of Origin: Switzerland

Please Note: This lot is located in Leicester, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.