Scraven 100-Ton Anvil Bumper with 13m Through-Feed Roller Table

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Blaw-Knox Medart 16-Roll Horizontal/Vertical 2 Plane Straightener for up to 4” Square, 7” Flat, 4” Hex, Main Motor 224 KW, 460 Volt, 1130 RPM; Individual Vertical Motorized Adjustment; Roll Centers Adjustable; with 10M Bundler Accumulator Table

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bronx Model PBRV 6, 2 Roll/Twin Motor Bar Straightener (2 x Sets Spare Rolls), Capacity 4” Dia Round MS, 3” Dia Hexagonal SS, Rolls 18” Dia x 26” Length; (2) 59.7Kw Motors; Spare Roll; Entry & Exit Protective Heavy Duty Tables, Transfer Conveyors, Spare Carriages & Tooling

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Double Rotary Uncoilers, Coil Opener, Horizontal Pre-Straightener & Vertical Pre-Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag IIIB Bar Combined Drawing Line, 19mm – 42mm (38mm Hex) x 25-Ton Pull x 700KW Capacity, 44m Run including Schumag Push Pointer, Schumag Model IIIB, Twin Carriage Drawing Machine, and After Drawer Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hydraulic Impact Cutoff

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bar Loader and Transfer Station

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

OCN SR63 2-Roll/Twin Motor (59KW) In-line Bar Straightener / Transfer Table, OCN Twin Chamfering Machine with Bar Bundler and Rejection Station, Bar Transfer, (2020) Defectomat Surface Crack Detector and (2) Demagnetisers, Bundler Accumulator, Associated Controls, Drives and Equipment

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Casa Grande Double Decoiler, Casa Grande Entry Bar Manipulator, Milling Type Pointer, Horizontal/Vertical Pre Straightening

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag IIBF Flat Bar Drawing Machine; Motor-169Kw; Straightener, Crack Detector, Second Stage After Draw Straightener, Casa Grande Flying Rotary Shear, Runout to Bar Transfer Conveyor, Associated Controls, Drives and Equipment

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Double Rotary Decoilers, Rotary, Coil Opener, Horizontal Pre-Straightener Haul Off, Vertical Pre-Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag IIB Bar Drawing Line, 15mm – 26mm x 15-Ton Pull x 600KW Schumag Push Pointer, Schumag Model IIB, Twin Carriage Bar Drawing Machine and After Drawer Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Double Rotary Decoilers, Coil Opener, Horizontal Pre-Straightener Haul Off, Vertical Pre-Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag Push Pointer, Schumag Model IIB Twin Carriage Bar Drawing Machine, Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 basis

Schumag Double Rotary Decoilers, Horizontal Pre-Straightener Haul Off, Vertical Pre-Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag IB Bar Drawing Line, 4mm – 16mm x 6.5-Ton Pull x 350KW (check motor size) Capacity, Schumag Twin Carriage Bar Drawing Machine Drive Motor- 203Kw, 400volt DC, 1570-2800 RPM; and After Drawer Straightener, Crack Detector, Demagnetizer, Schumag Cut-To-Length Shear

Please Note: This lot is located in Willenhall, UK.There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag Double End Chamfering Machine, Capacity 10 – 30mm Diameter; with Bar Transfer and Bundler Accumulator

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag Double Rotary Decoilers, Horizontal Pre-Straightener Haul Off, Vertical Pre-Straightener

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag Triple Carriage Drawing Machine and Straightener, Crack Detector, Demagnetizer, Schumag Cut-To-Length Shear Schumag Polisher, Runout to Bundler Accumulator, Associated Controls, Drives and Equipment (Gearbox in need of repair)

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Schumag Double End Chamfering Machine (Off Line) Complete with Entry Descrambling Table, Bar Transfer Conveyor, Exit Trough, Operator’s Pulpit Control Panel, Hydraulic Motor/Pump Unit, Chamfering Head Motors, 18.7/25 Kw, (ea).

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Sir James Farmer Norton & Co 2-Roll Horizontal Bar Straightener, Roll Dimensions 9” Dia x 9” Length, Entry and Exit Feed Tables, Bottom Guide. Country of Origin: United Kingdom

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Larmuth Rotary Bar Wrapping Machine. S/No. S 7680 M-S TR. Country of Origin: United Kingdom

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Robertson 4 over 5, 2-Plane Flatner/Roller Straightener with Infeed/Outfeed Roller Conveyors, S/No. G4095. Country of Origin: United Kingdom

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

MOJ Barmatic 100V XL Tube Deburring & Bar Chamfering Machine with Horizon SM10-13R Portable Fume Extractor (2014). Country of Origin: United Kingdom

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bar Chamfering Machine with Martonair M/3612 Sequence Controller

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bigwood 8-Roll Straightening Machine. Country of Origin: United Kingdom

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bronx 2-Roll Straightening Machine (Spares or Repairs). Country of Origin: United Kingdom

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Butler 26" Super Shaper, S/No. 22987/2. Country of Origin: United Kingdom

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Invicta Type 2M Horizontal Shaper, S/No. 133505/67. Country of Origin: United Kingdom

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Electric Pulley System

Please Note: This lot is located in Willenhall, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.