Sharmic VE14 Rumbler. S/No. S1602 (2012). Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Guyson Reach in Sandblast Cabinet. Please Note: Spares and Repairs Only. Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Atlas Copco GA18 Workplace Air Compressor System. S/No. AII270090 (2002) Country of Origin: Belgium, Working Pressure 7.5 Bar, Power 18.5kw, Incl. Tundra 115 Compressed Air Refridgeration Dryer. S/No. 21M-022966 (2021) Country of Origin: United Kingdom, Atlas Copco Oil Water Separator, Atlas Copco In Line Filters, 490ltr Vertical Air Receiver

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Karcher KSM 750 Powered Floor Sweeper, No 12V Charger. S/No. 039286 (2006). Country of Origin: Germany

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Freddy Super Minor Oil/Coolant Suck & Blow Vacuum (1997). Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Big Brute Wet & Dry Vacuum. Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Large Capacity Electro Magnetic Chuck Size 2440mm x 460mm. Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Large Capacity Electro Magnetic Chuck Size 2440mm x 460mm. Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

5 Bay Stillage Racking, 7 Shelf High, Incl. Qty of Stillages size 1100 x 800 x 250mm. Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Steel Heavy Duty Tool Storage Shelving, Overall Size 4000mm x 1900mm x 2900mm. Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Abus Swing Jib Hoist, Capacity 500kg, Powered Swing, Pendant Controlled Chain Hoist, Size 5.7m Swing x 3.65m Under Beam, Floor Bolted. S/No. 16081414 (2005). Country of Origin: Germany

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Abus Swing Jib Hoist, Capacity 1 Ton, Powered Swing, Pendant Controlled Chain Hoist, Size 6.6m Swing x 3.55m Under Beam. Country of Origin: Germany

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Python Cranes Swing Jib Hoist, Capacity 1000kg, Pendant Controlled Chain Hoist, Radius 4.5m x 3.5m Under Crossbeam. S/No. 148501. Country of Origin: Granada, Spain.

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Python Cranes Swing Jib Hoist with 500kg Demag Electric Pendant, Controlled Chain Hoist, Size 3.7m Radius x 2.83m Under Crossbeam. Country of Origin: Granada, Spain

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Floor Standing Counterbalance Swing Jib Hoist, Capacity 125kg, Size 2.8m Swing x 3m Under Crossbeam. Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Demag Swing Jib Hoist, Capacity 125kg, Demag Pendant Controlled Chain Hoist, Size 3m Swing x 2.4m Under Crossbeam. S/No. WE4. Country of Origin: Germany

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Abus Swing Jib Hoist Type V5, 1000kg Demag Pendant, Controlled Chain Hoist, Floor Bolted, Size 5m Swing x 3.2m Under Crossbeam. S/No. 03/166559 (1994) Country of Origin: Germany

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Walker Hagou BUX Box Magnet Electro Mag Lifter, Base Size 130mm x 240mm. Country of Origin: Holland

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

BUX NMP 500 Permanent Lifting Magnet, Capacity 500kg. S/No. 38157/1 (1997). Country of Origin: Netherlands

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Tecnomagnete Maxx 1000, Permanent Lifting Magnet, Capacity 1000kg. S/No. S820 (1999). Country of Origin: Italy

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Tecnomagnete Maxx 1000 Permanent Lifting Magnet, Capacity 1000kg. S/No. 5818 (1999). Country of Origin: Italy

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Tecnomagnete Maxx 250 Permanent Lifting Magnet. S/No. S 00.1523 (2000). Country of Origin: Italy

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

250kg Permanent Lifting Magnet. Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Fork Lift Man Cage Attachment. Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Pallet Platform Scale with Baxtran BCD Weigh Scale Readout, Platform Size 1200 x 1200mm. Country of Origin: Spain

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Linde S40 Side Loader Fork Lift Truck, Capacity 4000kg, Lift Height 4550mm, Hours 3550. S/No. EIX316500039 (2005). Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lansing E20P-02 Electric Fork Lift Truck, Capacity 2000kg, Lift Height 4100mm, Side Shift. S/No. H2X335K01205 (1999). Country of Origin: United Kingdom

This lot is subject to a late collection date.

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Linde H35D Diesel Fork Lift Truck, Capacity 3500kg, Lift Height 4600mm, Side Shift, Enclosed Cab. S/No. H2X393R06141 (2004). Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

JCB Teletruk Fork Lift Truck Type TL250. S/No. SLPTLT2DWE0788021 (1997) Please Note: Requires Attention. Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Ford Transit 115 T350 Drop Side Pick Up Truck, Reg: WL61 GPY Mileage 30586, 6 Speed Gearbox. Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Faro Fusion Inspection Measuring Arm, Mounted on Work Table with 100mm Pitch Topped Holes. S/No. U06-05-12-27803 (2012). Country of Origin: Switzerland

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bowers Merology XT Holematic Bore Gauges, Range 25 - 35mm, 35 - 50mm, 50 - 65mm Setting Rings. Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Vickers Hardness Tester with Optical Scoop. S/No. HTM 5004. Country of Origin: United Kingdom

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various Engineering Tools in 12 Drawer Cabinet

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various HSS Drills, Dies & Sleeves in 10 Drawer Polstore Cabinet

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various Lenzke Clamps, Spanners and Hand Tools in 11 Drawer Polstore Cabinet

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various Tipped Milling Cutters, U Drills and Tooling in 10 Drawer Polstore Cabinet

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Upstanding Tool Shadow Rack Storage Unit (Tool Wall), Incl Hydraulic Jack, Sump Pump, chucks and Hand Tools

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(29) x Metal Stackable Stillages size 800mm x 600mm x 400mm

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(29) x Metal Stackable Stillages size 800mm x 600mm x 400mm

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Swarf Tipping Skip

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Container Box Manufacturing Jig Frame, Roll along Platform for Access Approx. Size 13m x 2.5m

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(8) x Welding Screens (Freestanding)

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Nederman Wall Mounted Weld Fume Flexi Arm Extractor

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Nederman Wall Mounted Weld Fume Flexi Arm Extractor

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Nederman Wall Mounted Weld Fume Flexi Arm Extractor

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Nederman Wall Mounted Weld Fume Flexi Arm Extractor

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

T Slotted Welding Fabrication Bench Size 2750mm x 915mm 860mm

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Welding Consumable Stores Incl. Contents

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Hydraulic Body - Frame Repair Kit Capacity 10 Ton

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Engineer Store Room incl. Various Fastners, Paints, Oils, Racking and General Tools

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(12) x Change Rool Lockers (No Keys)

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various Uncalibrated Inspection Mics, Verniers and DTI's

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Robin Smart PAT 500 Pat Tester (Not Calibrated)

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

HP Designjet T120 ePrinter Series, Large Format A4 - A1 Ink Jet Printer. S/No. CN51F6M07V (2015)

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

HP Laserjet P2055D Laser Jet Printer

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Zebra GC420T Therma Label Printer

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Fujitsu S1500 Scan Snap

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Konica Minolta Bizhub 163 A4 - A3 Photcopier. S/No. 02149594

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Brother HL-L8260CDW Colour Laser Printer

Please Note: This lot is located in Gloucestershire. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.