3180 - CNC Lathes, Machining Centres, Bridge Type and Plano Milling Machines, Thread Rolling, Fabrication and Toolroom Machinery Formerly Used By Ham Baker Group
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: Risk Assessments & Method Statements (RAMS) are a mandatory site requirement and should be submitted and approved prior to goods being dismantled/collected.
Please Note: These lots are located in Stoke-on-Trent, Staffordshire, UK. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 21-30 von 108
Los *: Combination of lots 3, 3A, 3B, 3C
Combination of lots 3, 3A, 3B, 3C
Lot 3 - Harrison Alpha 1550 XM Gap Bed CNC Lathe with Fanuc Series Oi-TD Control, Capto Spindle Taper Driven Tool Stock Holder, Distance between Centres 3000mm, Swing Over Bed 560mm Diameter, Spindle Bore Diameter 103mm, Spindle Speeds 2000rpm, (20 x Coromant Capto Driven Tool Holders, Capto C5 & C6 Spindle Tooling, Capto Spindle Setting Bar, 3 Jaw Chuck, 4 Jaw Chuck, Centre Driver Plate, Fixed Steady, Rear Spindle Bar Steady's. S/No. X4M033 (2015)
Lot 3A - Capto C5 & C6 Spindle Tooling suitable for Harrison Lathe Mounted in Tooling Trolley
Lot 3B - Capto C5 & C6 Spindle Tooling suitable for Harrison Lathe
Lot 3C - Filtermist FX7002 Oil Mist Extractor on Floor Stand
Due to export license ...
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los 4: XYZ SLX 555 3M NC Gap Bed Centre Lathe
XYZ SLX 555 3M NC Gap Bed Centre Lathe with Proto Trak SLX Control distance between Centres 3M, Swing 650mm Diameter, 3 position QCTP, Max Speed 1800rpm, 400mm Dia 4 Jaw Chuck, Quick Change Tool Holders, Rotating Centres, Fixed and Travelling Steady, Cross Slide Din Tool Holder. S/No. SLM00011 (2008)
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK ...
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los 4A: Filtermist FX7002 Oil Mist Extractor on Machine Mount Bracket
Filtermist FX7002 Oil Mist Extractor on Machine Mount Bracket
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los 4B: Various Quick Change Tool Holders and Tooling
Various Quick Change Tool Holders and Tooling
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los 4C: Various Quick Change Tool Holders and Tooling
Various Quick Change Tool Holders and Tooling
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los 4D: Various Quick Change Tool Holders and Tooling
Various Quick Change Tool Holders and Tooling
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los *: Combination of lots 4, 4A, 4B, 4C, 4D
Combination of lots 4, 4A, 4B, 4C, 4D
Lot 4 - XYZ SLX 555 3M NC Gap Bed Center Lathe with Proto Trak SLX Control distance between Centres 3M, Swing 650mm Diameter, 3 position QCTP, Max Speed 1800rpm, 400mm Dia 4 Jaw Chuck, Quick Change Tool Holders, Rotating Centres, Fixed and Travelling Steady, Cross Slide Din Tool Holder. S/No. SLM00011 (2008)
Lot 4A - Filtermist FX7002 Oil Mist Extractor on Machine Mount Bracket
Lot 4B - Various Quick Change Tool Holders and Tooling
Lot 4C - Various Quick Change Tool Holders and Tooling
Lot 4D - Various Quick Change Tool Holders and Tooling
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should ...
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los 5: XYZ VMC 1010 Vertical Machining Centre
XYZ VMC 1010 Vertical Machining Centre with Siemens Sinumerik CNC Control, Table Size 1200mm x 450mm, Spindle Speed 8000rpm Max, 24 Position ATC, BT40 Spindle Taper, Includes Various Types of BT40 Spindle Tooling, Renishaw TS27R, Test Set Up Probe, Renishaw OMP 40 - 2 Tool Probe, Filtermist FX7002 Oil Mist Filter Extractor. S/No. V0808010 (2009)
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. ...
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los 5A: Qty BT40 Spindle Tooling
Qty BT40 Spindle Tooling
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los 5B: Filtermist FX7002 Oil Mist Extractor
Filtermist FX7002 Oil Mist Extractor with Monitor Unit. S/No. 089486
Please Note: This lot is located in Stoke-on-Trent, Staffordshire. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.