HAAS TL-25 CNC Lathe with C Axis, Milling & Sub-Spindle (2005), Swing Over Cross Slide 368mm, Maximum Cutting Dia. 406mm, Cutting Length 864mm, 3400rpm Spindle, 4000rpm Sub Spindle, 991mm B.C, Bar Capacity 76mm, Spindle Power 40Hp, C Axis 0.01 Degrees, Swarf Auger, Parts Catcher, Tool Setter, Coolant, HAAS Magazine Barfeed, 3 Jaw Chucks, Coolant, 4 X Driven Tools

Please Note: This lot is located in Leicestershire UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

XYZ SMX 3000 2 Axis CNC Mill (2007) Traverses X Y Z: 780 x 410 x 400mm, Table 1371 x 305mm, Spindle Speed 3600rpm, Spindle Taper ISO40, Spindle Motor 3.75kw, Prototrak SMX Control, Low Volt Lightpower Drawbar, Coolant

Please Note: This lot is located in Leicestershire UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Jones & Shipman Techmat 400 CNC Creep Feed Grinder with Fanuc CNC Control, 595mm x 305mm Fine Pole Magnetic Chuck, 500 x 95 x 203.2mm Grinding Wheel, Overhead Wheel Dresser, Various Grinding Wheel Spindle Arbours and Spacer Rings, High Capacity Coolant Filtration System with Paper Clarifier and Chiller Unit, Spore Spindle motor, Various Grinder Spares, F21/8 Filtermist Oil/Mist Extractor, Machine Weight 7500kg. S/No. M20024

Please Note: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto a low loader trailer and will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Nikken 5th Axis Attachment, (2) x Remote Programme Pendants (Tilt & Rotary) fitted in a door Steel Cabinet

Please Note: This lot is located in Birmingham, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 3 & 3A

Lot 3 - Jones & Shipman Techmat 400 CNC Creep Feed Grinder with Fanuc CNC Control, 595mm x 305mm Fine Pole Magnetic Chuck, 500 x 95 x 203.2mm Grinding Wheel, Overhead Wheel Dresser, Various Grinding Wheel Spindle Arbours and Spacer Rings, High Capacity Coolant Filtration System with Paper Clarifier and Chiller Unit, Spore Spindle motor, Various Grinder Spares, F21/8 Filtermist Oil/Mist Extractor, Machine Weight 7500kg. S/No. M20024

Lot 3 A - Nikken 5th Axis Attachment, (2) x Remote Programme Pendants (Tilt & Rotary) fitted in a door Steel Cabinet

Please Note: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto a low loader trailer and will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Soraluce SL-4000 Fixed Table, Travelling Column Milling Machine with Heidenhain TNC426 Control, Table Size 4000 x 800mm, Y/Z Axis = 1600/900mm, Auto-indexing Head. S/No. 108156

Please Note: This lot is located in Birmingham, UK. A charge of £1,750 for dismantling and loading onto a low loader trailer and will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Anayak VH-220 CNC CNC Bed Type Milling Machine with Heidenhain TNC 426 Control. S/No. M-990310 (1999)

Please Note: This lot is located in Birmingham, UK. A charge of £950 for dismantling and loading onto a low loader trailer and will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Titan Model SNX-63 Power 63 Ton Power Press with Anti-vibration Mount, Bed size 900mm x 520mm, Top Platen size 495mm x 400mm, OVP-7000 Touch Screen Control Panel, Stroke Length Fix - 130mm, Strokes per min 40 - 70spm, Die Height 300mm, Side Adjustment 70mm, Side Area 900 x 520mm, Main Motor 10hp x 1440rpm, Sick Light Guards. S/No. 11029/02/2020 (2020)

Please Note: This lot is located in Birmingham, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Techna-Fab Model QC12K-6X3200mm Hydraulic Swing Shear. S/No. S2021-0511 (2021)

Please Note: This lot is located in Wolverhampton, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

OAV Max 370P Edgebander. S/No. 20120012EB7P13 (2020)

Please Note: This lot is located in Wolverhampton, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Emhart Teknologies Tucker DCE 15HA Stud Welder (new in 2001 but not used by owner)

Please Note: This lot is located in Coventry, UK. A charge of £25 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Costa Levigatrici Maccs - S 1350 Grinding Machine. S/No. A30514LP1 (2003)

Please Note: This lot is located in Leicester, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.