DBM Technologie FAP 60 Varnish Lacquer Spray Line, To include 2 x wet back hanger frame rotating varnish spray tanks (hanger frame size appx 1000 mm long), Varnish tank room with 5 x diaphram pumps, 2 x Destatic Top-Spray static eliminators, Drying oven to outfeed manual take off, Electrical control panel with Siemens touch screen control, Associated tanks, pumps and chemical units, Varnish spray line. S/No. 2009011 (2009). Country of Origin: Italy

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

MEG Kombi 437 8/A Pre Varnish Line Rack Hanger Wash Dipping System, 7 dip tanks 1 of which is ultrasonic, warm and cold clean water plus chemical soap wash tank, Siemens simatic touch screen control, Chemical wash tanks and pumps, 6 x filter housings, Aqua Ionic UV steriliser, Manual take off to varnish spray line, Wash line. S/No. 056 09E (2009). Country of Origin: Italy

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Itas Thermal Oxidiser, Type MHP, Model IT151/MV/8, Natural Gas Fired (3 unit) Nichias Corp Solventclean VOC Concentrator |Type SCB.4200.40XM (2010) CBI 54 Air Intake Fan Unit. S/No. of Oxidiser 1433 (2010) itas Control Room Building with all Associated Controls for Oxidiser. Country of Origin: Italy

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Varnish Rack Dipping Cleaner System, Siemens Simatic OP7 Control, Electric Cabinet, Pumps and Valves. Country of Origin: United Kingdom

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Techgroup Modual 470/4 Varnish Rack Dip Cleaning System, Siemens Control Panel, Electrical Cabinets, Pumps and Valves. S/No. 04067 (2004). Country of Origin: Italy

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

itec Wet Back Varnish Line Filtration Recovery System, To include 3 x Plastic Tanks approx size 2.5  diameter x 4m high, Sammy SM4501020 Filter Press (S/No. 398 (2014) Control Cabinet with Siemens Simatic HMI Touch Screen Control, Hach SI974 pH meters x 2, Technol Atlantic 60/C 440 ltr Filter Unit with Associated Pumps and Valves. Country of Origin: Italy

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Clean Room Through Roll In Drying Oven, Temp 90Deg, Int Size 1200 x 1300 x 1850mm

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Clean Room Through Roll In Drying Oven, Temp 50Deg, Int Size 1200 x 1300 x 1850mm

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Double Door Through Drying Oven, Int Size 1050 x 2000 x 1500mm

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Tech Group MS160 Parts Wash Machine. S/No. 0029 (2000)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

LAC Corp Art Robo NA1.2 Painting System, Siemens Simatic Touch Control & Screen. S/No. N111401 (2011)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Yaskawa Motoman YR-MH6, 6 Axis Paint Spray Robot, 6kg Payload, DX100 Control and Pendant Teach Panel. S/No. 516152-11-5 (2011)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mitsubishi Paint Spray Robot

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mitsubishi Paint Spray Robot

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mitsubishi Paint Spray Robot

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Motoman 6 Axis Paint Spray Robot, Type ERCS-HP3-AE00 with NX100 Control, Teach Pendant. S/No. RH9500-5042-04 (2005)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Johann Tauss TSV 380 Vibratory Parts Rumbler

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Tech Group TLS 2500 Through Belt Tunnel Dryer, Belt width 700mm x 3600mm, Aparture Height 500mm, 16kw. S/No. 0138 (2001)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Tech Group Modular Sys 120-8 Parts Cleaning Dipping Wash, 6 Tanks for Clean and Rinse, Overhead Basket Lift, Filter System Pumps, Siemens Control Panel on Electric Cabinet, Overall Size of all Tanks 5000 x 1000mm, In/Out Conveyor, 32kw. S/No. 04066 (2004)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Parts Tunnel Drying Unit, Belt Size 2500 x 700mm with Drop Off and Return Conveyor, Adjustable Height to 50mm, Kolaric e1061 Touch Screen Control, End Blower Unit

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

GMP e100.25, Through Feed Rolling Iron, Roll Size 1000mm Wide, 6kw. S/No. 2014010350049

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Menzerba DPS1000 Wood Barrel Tumbler, Barrel Size 1100 x 1200 Diameter. S/No. 13/1724 (2000)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

2 Head Trim/Cut Off Saw, Blade Diameter 60mm, Light Guards, Pneumatic Operated

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Parts Dip Cleaning System, 5 Tanks for Clean & Rinse, Overhead Basket Lift, Filter, Pumps and Tanks with Siemens Control on Electric Cabinet, Overall size of Tanks 5000 x 1000mm, In/Out Conveyor

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Parts Tunnel Drying Unit, Belt Size 2500 x 700mm with Drop Off and Return Conveyor, Adjustable Height to 50mm, Kolaric e1071 Touch Screen Control, End Blower Unit, 7kw. S/No. 002 (2013)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Luxus 5000N Pneumatic Press. S/No. 26062015 (2015)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Luxus 5000N Pneumatic Press. S/No. 09032016 (2016)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Tech Group Modular Sys 280-5, Parts Wash & Rinse Dip System (Ultrasonic), 5 Tank, Overall Tank Size 4300 x 1200mm, Filter, Pumps and Chemical Tanks, Overhead Dip Arm On Cross Rail with Siemns Control on Electric Cabinet. S/No. 0126 (2001)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Grega 8 Shelf Curing Oven, Fed with Silverstone Scissor Lift Platform, Internal Roller Shelf Size 500mm Wide x 80mm, Length 3400mm, 24kw, e1061 Touch Screen Control. S/No. 0001/20 (2020)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

4 Shelf Curing Oven, Shelf size 740 x 700 x 140mm

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Leybold 10536 Vacuum Pump. S/No. 20900209547

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Leybold SV65 10907 Vacuum Pump

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Seit Electronica Autoflux Metal Spectacle Frame Flux Dip and Drying System. S/No. 021612321 (2016)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Elometer 4340 Automatic Film Applicator. S/No. DF25726 (2014)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Erichsen 425/2 UV Light Cabinet. S/No. 90123

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Heraeus UT6000 Laboratory Oven Max Temp 250deg c

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sartorius Acculab Vicon Vic-303 Top Pan Balance, Max Capacity 300g, d = 0.001g

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Teca-Print Type 70 Pad Printer. S/No. 84138306

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Teca-Print TPX 500 Pad Printer. S/No. 9224410

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Heraeus 7011 UV Lamp Unit. S/No. L524

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Heidolph Silent Crusher M Homoginiser 5000 - 26000 1/min

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

MPMInstruments M101-0R Laboratory Shaker. S/No. A0209485

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Fast & Fluid Management Jonathan 1p54 Paint Mix/Agitator Unit, 6 Shelf with 12 Agitators per Shelf. S/No. 6586

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Heraeus UT6 Laboratory Oven, Temp 250deg c,. S/No. 98105571

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

BASF CW 22 x 30 Kombi Nyloprint Unit. S/No. 31505 (2000)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Brookfield DV-II and Voscometer with Atago Viscus Microscope and TC-501 Heated Water Cirulator

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Macherey Nagal Nanocolor VIS II Spectrometer with Vario C2 Tube Heater, Manual and Test Tubes, Dustcover. S/No. NV15 21316

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mettler Toledo T50 Titrator. S/No. 5128049688

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mettler Toledo DL38 Titrator

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Trane RTAD 125 Water Chiller, size 4426 x 2260 x 2160mm, Weight 3645kg, S/No. EKT 2597 (2010)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sona Branson Ultra Sonic Welder, Incl. TP520 AE Sonic Welder Head Mounted on Rise and Fall Pillar Frame, Branson X2000 Controller

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Teca-Print TC70 Pad Printer. S/No. 84130102

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

SGMN STMENSAF Pneumatic Press fitted with Panasonic Control and Rear Light Guards. S/No. 001 I015 (2015). Country of Origin: Italy

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bench Mounted Pneumatic Press, 2 Button Operation in Enclosure with Light Guards. Country of Origin: Venezuela

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

GPA PRNA 500 Pneumatic Press Mounted in Enclosed Table with Foot Pedal Operation and Light Guards. S/No. 2022645 (2002). Country of Origin: Italy

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

KEV MB5500 Homogoniser Mounted on Height Adjustable Legs, Speed 5500min .37kw. S/No. MB-002 (2005). Country of Origin: Slovenija

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

KEV MB5500 Homogoniser Mounted on Height Adjustable Legs, Speed 5500min .37kw. S/No. Unknown

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

KEV MB5500 Homogoniser Mounted on Height Adjustable Legs, Speed 5500min .37kw. S/No. MB-001 (2005)

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(3) x Various Type Overhead Mixers

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Adhesive Doing Robot, Hyleweiz CNC-Technik, S400 3 Axis Machine, Zero 3 Stepper Controller, I & J JBE 1113 Injector Control, BT100LC Peristaltic Pump, HP Compaq PC & Monitor, Mounted on Table in Enclosure

Please Note: This lot is located in Slovenia. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.