Danobat Valvecentre 6VT, S/No. 320003 (2008) with Fanuc Series 180i-TB Control, Max Diameter over Longitudinal Guides 1350mm, Max Diameter over Cross Guides 1300mm, Spindle Bore Diameter 290mm, Max Main Spindle Speed 400rpm, Max Rotation Torque 4.775Nm, Longitudinal Slide Travel 1420mm, Cross Slide Travel 960mm, Main Spindle Nose DIN 55026 (28”) Country of Origin: Spain

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Danobat Valvecentre 5VT, S/No. L-855 (2002) with Fanuc Series 16i-T Control, Max Diameter over Longitudinal Guides 1350mm, Max Diameter over Cross Guides 1080mm, Spindle Bore Diameter 210mm, Max Main Spindle Speed 600rpm, Max Rotation Torque 4.038Nm, Longitudinal Slide Travel 1359mm, Cross Slide Travel 870mm, Main Spindle Nose DIN 55026 (20”) Country of Origin: Spain

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Takisawa EX110 CNC Lathe, S/No. CI02E11256 (2008) with Fanuc 21i-TB Control, 3-Jaw Chuck, 10 Station Turret, Tailstock, Filtermist, Swarf Conveyor. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Takisawa EX110 CNC Lathe, S/No. CI02E11258 (2008) with Fanuc 21i-TB Control, 3-Jaw Chuck, 10 Station Turret, Tailstock, Filtermist, Swarf Conveyor. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Takisawa EX110 CNC Lathe, S/No. CI05E11336 (2008) with Fanuc 21i-TB Control, 3-Jaw Chuck, 10 Station Turret, Tailstock, Filtermist, Swarf Conveyor. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Lead Microcut HBM-4 Boring Mill, S/No. 074001068 (2007) Fanuc 18i-MB Control, X/Y/Z/B/W=2200/1600/1600/550mm/1 Deg, Table Size 1200mm x 1500mm x 5000kgs, Spindle Taper ISO No. 50, Spindle Speeds 35 - 3000rpm, 60 ATC, Spindle Diameter 110mm. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Cogsdill Facing and In Line Pocket Boring Bars, Incl T7520 Recon Facing and Contouring Head Machine Collars, T7514 Seat Pocket Boring Bar and Extension Piece

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

ITS CH8 Contouring and Facing Head, Max Speed 800rpm, Slide Stroke 38.1mm, Incl Machine Collar, Slide and Boring Bar Holders. Country of Origin: U.S.A.

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Lot 6 - Lead Microcut HBM-4 Boring Mill, S/No. 074001068 (2007) Fanuc 18i-MB Control, X/Y/Z/B/W=2200/1600/1600/550mm/1 Deg, Table Size 1200mm x 1500mm x 5000kgs, Spindle Taper ISO No. 50, Spindle Speeds 35 - 3000rpm, 60 ATC, Spindle Diameter 110mm. Country of Origin: Taiwan

Lot 6A - Cogsdill Facing and In Line Pocket Boring Bars, Incl T7520 Recon Facing and Contouring Head Machine Collars, T7514 Seat Pocket Boring Bar and Extension Piece

Lot 6B - ITS CH8 Contouring and Facing Head, Max Speed 800rpm, Slide Stroke 38.1mm, Incl Machine Collar, Slide and Boring Bar Holders. Country of Origin: U.S.A.

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

HAAS SL40 BCE Big Bore CNC Lathe, S/No. 73471 (2008), Filtermist, 3-Jaw Chuck, 10 Station Turret, Filtermist, Swarf Conveyor. Country of Origin: U.S.A.

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Hwacheon TTC-10 Twin Spindle Turning Centre, S/No. M077350J4XC (2011) with Fanuc Oi-TD Control, 2 x 12 Station Turrets, Filtermist, Swarf Conveyor. Country of Origin: Korea

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Hwacheon TTC-10 Twin Spindle Turning Centre

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Combination of lots 8 & 8A

Lot 8 - Hwacheon TTC-10 Twin Spindle Turning Centre, S/No. M077350J4XC (2011) with Fanuc Oi-TD Control, 2 x 12 Station Turrets, Filtermist, Swarf Conveyor. Country of Origin: Korea

Lot 8A - Hwacheon TTC-10 Twin Spindle Turning Centre

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Takisawa EX-122 CNC Lathe, S/No. CG05E20013 (2006) with Fanuc Series 21i-TB Control, 10 Station Turret, Tailstock, Swarf Conveyor, Filtermist, 3-Jaw Chuck. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Takisawa EX-122 CNC Lathe, S/No. CG02E20010 (2006) with Fanuc Series 21i-TB Control, 10 Station Turret, Tailstock, Swarf Conveyor, Filtermist, 3-Jaw Chuck. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Takisawa EX-122 CNC Lathe, S/No. CH08E20029 (2007) with Fanuc 21i-TB Control, 10 Station Turret, Tailstock, Filtermist, Swarf Conveyor. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Takisawa EX-310 CNC Lathe, S/No. CI04E40147 (2008) with Fanuc 21i-TB Control, C-Axis, 3-Jaw Chuck, Tailstock, Filtermist, Swarf Conveyor. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

HAAS SL40BCE CNC Lathe, S/No. 71319 (2010) Filtermist, Swarf Conveyor, 12 Station Turret, C Axis Live Tooling, No Chuck. Country of Origin: U.S.A.

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

HAAS SL40BCE CNC Lathe, S/No. 70355 (2006) Filtermist, Swarf Conveyor, 12 Station Turret, No Chuck. Country of Origin: U.S.A.

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Tooling suitable for HAAS SL40BCE CNC Lathe

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Combination of lots 14 & 14A

Lot 14 - HAAS SL40BCE CNC Lathe, S/No. 70355 (2006) Filtermist, Swarf Conveyor, 12 Station Turret, No Chuck. Country of Origin: U.S.A.

Lot 14A - Tooling suitable for HAAS SL40BCE CNC Lathe

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Lead Challenger BNC-1840 CNC Lathe, S/No. 041116125 (2004) with Fagor CNC Control, Tailstock, QCTP. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Takisawa EX-122 CNC Lathe, S/No. CI04E20039 (2008) with Fanuc Series 21i-TB Control, 10 Station Turret, Tailstock, Swarf Conveyor, Filtermist, 3-Jaw Chuck. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Kuraki KBT-11WDX-A Horizontal Boring Mill, S/No. 43554, X/Y/Z/B/W=2000/1500/1450/650mm/90 Deg, Table Size 1400mm x 1600mm x 6300kgs, Spindle Taper ISO No. 50, Spindle Speeds 5 - 1300rpm, 40 ATC, Spindle Diameter 110mm. Country of Origin: Japan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Cogsdill Facing Head and In Line Pocket Bars for Boring, ZX-420-CON Facing Head, Max Slide Stroke 101.66mm, 2" and 4" In Line Pocket Boring Bars, Machine Collars off Kuraki Borer, Various Size Tool Slides, Ring Groove and Boring Holders

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Combination of lots 17 & 17A

Lot 17 - Kuraki KBT-11WDX-A Horizontal Boring Mill, S/No. 43554, X/Y/Z/B/W=2000/1500/1450/650mm/90 Deg, Table Size 1400mm x 1600mm x 6300kgs, Spindle Taper ISO No. 50, Spindle Speeds 5 - 1300rpm, 40 ATC, Spindle Diameter 110mm. Country of Origin: Japan

Lot 17A - Cogsdill Facing Head and In Line Pocket Bars for Boring, ZX-420-CON Facing Head, Max Slide Stroke 101.66mm, 2" and 4" In Line Pocket Boring Bars, Machine Collars off Kuraki Borer, Various Size Tool Slides, Ring Groove and Boring Holders

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

KIA H63 Horizontal Machining Centre, S/No. KH630197 (2001) with FANUC 18-M Control, Pallet Size 630 x 630mm, 1 Deg Indexing, X/Y/Z=950/825/760mm, Spindle Nose NT50, Spindle Speeds 20-4500rpm, 60 ATC, Filtermist, 

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Lead Hwacheon TTC-10 Twin Spindle Turning Centre, S/No. M07735431X8 (2006) with Fanuc 18i-TB Control, 2 x 12 Station Turrets, Filtermist, Swarf Conveyor. Country of Origin: Korea

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Tooling suitable for Lead Hwacheon TTC-10 Twin Spindle Turning Centre

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Combination of lots 19 & 19A

Lot 19 - Lead Hwacheon TTC-10 Twin Spindle Turning Centre, S/No. M07735431X8 (2006) with Fanuc 18i-TB Control, 2 x 12 Station Turrets, Filtermist, Swarf Conveyor. Country of Origin: Korea

Lot 19A - Tooling suitable for Lead Hwacheon TTC-10 Twin Spindle Turning Centre

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Takisawa EX-122 CNC Lathe, S/No. CI04E20040 (2008) with Fanuc 18i-MB5 Control, 10 Station Turret, Tailstock, Filtermist, Swarf Conveyor. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Takisawa EX-110 CNC Lathe, S/No. CH03E11042 (2007) with Fanuc 21i-TB Control, 10 Station Turret, 3-Jaw Chuck, Tailstock, Filtermist, Swarf Conveyor. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Chevalier FSG-1640AD III CNC Surface Grinder, S/No. FFD155001, Table Size 400 x 1000mm, Max Grinding Length 1015mm, Max Grinding Width 405mm, Coolant Filtration Tank, Filtermist, Wheel Dresser, Electro-Magnetic Chuck. (2015) Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Hwacheon TTC-10 Twin Spindle Turning Centre, S/No. M077354D5XA (2006) with Fanuc 18i-TB Control, 2 x 12 Station Turrets, Filtermist, Swarf Conveyor. Country of Origin: Taiwan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Tooling suitable for Hwacheon TTC-10 Twin Spindle Turning Centre

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Combination of lots 23 & 23A

Lot 23 - Hwacheon TTC-10 Twin Spindle Turning Centre, S/No. M077354D5XA (2006) with Fanuc 18i-TB Control, 2 x 12 Station Turrets, Filtermist, Swarf Conveyor. Country of Origin: Taiwan

Lot 23A - Tooling suitable for Hwacheon TTC-10 Twin Spindle Turning Centre

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Hwacheon TTC-10 Twin Spindle Turning Centre (2011) (In need of repair) with Fanuc 18i-TB Control, 2 x 12 Station Turrets, Filtermist, Swarf Conveyor. Country of Origin: Korea

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Tooling Suitable Hwacheon TTC-10 Twin Spindle Turning Centre

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Combination of lots 24 & 24A

Lot 24 - Hwacheon TTC-10 Twin Spindle Turning Centre (2011) (In need of repair) with Fanuc 18i-TB Control, 2 x 12 Station Turrets, Filtermist, Swarf Conveyor. Country of Origin: Korea

Lot 24A - Tooling Suitable Hwacheon TTC-10 Twin Spindle Turning Centre

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

KIA Centre H63 Horizontal Machining Centre, S/No. KH630201 (2001) with FANUC 18-M Control, Pallet Size 630 x 630mm, 1 Deg Indexing, X/Y/Z=950/825/760mm, Spindle Nose NT50, Spindle Speeds 20-4500rpm, 60 ATC, Filtermist. Country of Origin: Korea

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

KIA Superturn 28L CNC Lathe, S/No. SKTL 28017 (2001) with Fanuc Series 21-T Control, 10 Station Turret, Tailstock, Swarf Conveyor, Filtermist, 3-Jaw Chuck. Country of Origin: Korea

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Mori Seiki SL253B CNC Lathe, S/No. SL250BF2649 (2002) with MSC-500 Control, 10 Station Turret, 3-Jaw Chuck, Tailstock, Filtermist, Swarf Conveyor. Country of Origin: Japan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Mori Seiki SL253B CNC Lathe, S/No. SL250BE2620 (2002) with MSC-500 Control, 10 Station Turret, 3-Jaw Chuck, Tailstock, Filtermist, Swarf Conveyor. Country of Origin: Japan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Mori Seiki SL25B5 CNC Lathe, S/No. 738 with Fanuc Control, 3-Jaw Chuck, 10 Station Turret, Tailstock, Tooleye, Filtermist, Swarf Conveyor. Country of Origin: Japan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Mori Seiki SL25B5 CNC Lathe, S/No. 813 with Fanuc Control, 3-Jaw Chuck, 10 Station Turret, Tailstock, Tooleye, Filtermist, Swarf Conveyor. Country of Origin: Japan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Yang ML-55A CNC Lathe, S/No. K10200 (1996) with Fanuc Series OT Control, 8 Station Turret, Tailstock, Filtermist, Swarf Conveyor, 3-Jaw Chuck. Country of Origin: Japan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Mori Seiki MH40 Horizontal Machining Centre, S/No. 817 with MF-M5 Control, Pallet Size 400 x 400mm, X/Y/Z/B=560/500/510/0.001 Deg, Max Spindle Speed 7,000rpm, Spindle Taper No.40, Filtermist, Swarf Conveyor. Country of Origin: Japan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Mori Seiki DL-20 CNC Twin Spindle Lathe, S/No. 23 (1990) with Fanuc Series O-TT Control, 2 x 12 Station Turrets, Filtermist, Swarf Conveyor. Country of Origin: Japan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Tooling suitable for Mori Seiki DL-20 Twin Spindle CNC Lathe

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Combination of lots 33 & 33A

Lot 33 - Mori Seiki DL-20 CNC Twin Spindle Lathe, S/No. 23 (1990) with Fanuc Series O-TT Control, 2 x 12 Station Turrets, Filtermist, Swarf Conveyor. Country of Origin: Japan

Lot 33A - Tooling suitable for Mori Seiki DL-20 Twin Spindle CNC Lathe

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Danobat G41S-600 Cylindrical Grinder, S/No. 2256 (2002) with Fanuc Series 210i-T Control, Max Distance Between Centres 600mm, Centre Height 175mm, X-Travel 310mm, Z-Travel 1345mm, Max Grinding Wheel Size 500mm (O/D) x 80mm (I/D) x 203.2mm, Table Swivel +9/-2 Deg. Country of Origin: Spain

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Jones & Shipman 1011P Surface Grinder, S/No. BO 92693Acu-Rite DRO, Magnetic Chuck, Coolant Tank. Country of Origin: United Kingdom

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

DCG Type 2415 x 110 Lathe, S/No. 41318-11-79. Country of Origin: Japan

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Jones & Shipman 1300 Surface Grinder. Country of Origin: United Kingdom

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Jaespa MSU-4-C Bandsaw, S/No. 1012077. Country of Origin: Germany

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Mostana Milling Machine. S/No. 39. Country of Origin: USSR

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Churchill Cylindrical Grinder, S/No. 36812. Country of Origin: United Kingdom

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Warner Swasey Asquith 3AC Single Spindle Chucking Lathe. S/No. A1353. Country of Origin: United Kingdom

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Warner Swasey Asquith 3AC Single Spindle Chucking Lathe. S/No. A2362

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis

Hilmor MSA 6 Bending Machine, S/No. 6626/3/61 (1961). Country of Origin: United Kingdom

Please Note: These lots are located in Gateshead, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis