Pamas SBSS-C Particle Counter, Laboratory particle counter for liquids with a viscosity of up to 1600 cSt - Dimensions: cm 40 x 28 x 58H. S/No. 320-482

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hydac Fluid Control Unit FCU 2210-5, Particle Counter, Mobile Mineral Oil Particle Counter - ​Dimensions cm: 37 x 35 x 15H. S/No. 050F1077

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hydac Fluid Control Unit FCU 2210-5, Particle Counter, Mobile Mineral Oil Particle Counter - ​Dimensions cm: 37 x 35 x 15H. S/No. 050F1078

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Buelher Wilson VH1150 Vickers Hardness Tester, Load 10 kg - Dimensions cm:10 x 62 x 80 (2016) 70kg

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Shimadzu Macro Vickers Hardness Tester, Load 1 kg - Dimensions cm:18 x 32 x 45H. S/No. 90935

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Galileo D200 Rockwell Hardness Tester, load 250 kg - Dimens

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.ions cm: 20 x 55 x 74H. S/No. 309575

Otto Wolpert-Werke Dia Testor 3D, Dia Testor 3D, Brinnel Hardness Tester 1000 kg, S/No. 3026 (1974)

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Leica Stereozoom S91, Stereo Microscope, Dimensions cm: 26 x 34 x 64H. S/No. 3718150005

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Leica DMILM, Inverted Microscope, Inverted inspection and measuring microscope for materials testing - Including a digital microscope color camera Leica DFC295. S/No. 0661230613 - Dimensions cm: 65 x 34 x 40H

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Falc Instruments, STE-F 120lt, Basic Forced Convection Oven, Temperature: Min.5 °C Max.300 °C - External Dimensions cm: 85 x 70 x 75H - Internal dimensions cm: 50 x 47 x 52H. S/No. R133738 (2013)

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Ametek MAXx MLF15 Spectrometer, Optical emission spectrometry (OES) analyzer - dimensions cm: 62 x 70 x 140H. S/No. 12005333 (2012)

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hach TitraLabKF1000 series, Volometric Titrator, Titrator for Karl Fischer Titrations, P/N KF 1121.981830587. (2018)

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Microtecnica P 600 -A -B, Profile Projector, Screen diameter: max dia. 600 mm - overall dimensions cm: 200 x 120 x 200H. S/No. 330

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

OLYMPUS IPLEX Portable Videoscope, IV94035GL, Portable Videoscope, S/No. Y902410 (2020)

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sonatest Wave Digital Ultrasonic Flow Detector. S/No. I018580 (2021)

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sonatest Wave Digital Ultrasonic Flow Detector. S/No.1018610 (2021)

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Krautkramer USM 36 Ultrasonic flaw detector. S/No. 18107583

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

GE Sensing & Inspection Technologies USM Go Ultrasonic flaw detectors (Qty 3) with leads and accessories

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Atlas Copco Stanalyser Torque analyser with transducers IRTT-B 1400A-25(Qty 2) and IRRT-B 5000-38 on trolley. S/No. 5560.1221

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Delta Ohm HD2101.2R Thermohygrometer with sensor and USB lead in case (Qty 2)

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Atlas Copco Sta 6000 Torque tester with 6 transducers, various sizes. S/No. A772026

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mitutoyo Gauge blocks (Qty 4) 304.8, 406.4, 508 and 203.2mm

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mitutoyo / Mahr Dial indicators, assorted (Qty24)

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hirst Magnetic Instruments Ltd GM07 Gaussmeter with case. S/No. 3161

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Rhopoint Novo-Gloss Lite Statistical gloss meter with charger and case. S/No. 000406025A

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mahr MarSurf M300 Surface roughness tester with charger and case. S/No. 6910402 3112/13

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

MTS Sensors Test meter

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Zehntner ZGM 1110 Gloss Meter and ZGR 2020-2024 Grindometer coating grind fineness meter

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Digital indicators (Qty 4)

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Digital instruments including Mitutoyo SJ-201 surface roughness testers (Qty 3) and Testo 830-T4 infrared digital thermometers (Qty 3)

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

BAQ Shore A Digital indicator with stand and power supply. S/No. SDA-1478

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Mahr Perthometer M4Pi Surface roughness meters (Qty 2)

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sonatest Prisma Ultrasonic test machine

Lot is sold subject to seller's final approval. Confirmation is given within 48 hours of the close of the event.

Please Note: This Item is located in Italy. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.