3116 - Sheet Metal Machinery & Fabrication Equipment, Welders & Bed Plates Surplus to the on-going requirements of The Pryme Group

Engineering

Auction ended on

Tuesday 7 Jun 2022 at 03:00PM (BST)

Time left

Auction finished

Auction description

Please Note: These lots are located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Buyer's premium

Buyer's Premium will be charged at 18%.

VAT

Value added tax will be charged at 20%.

Viewing times

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

9 Jun 2022 at 17:00 (BST)

Final clearance date

23 Jun 2022 at 17:00 (BST)

Shipping agents

Storage contractors

Exporting/Importing from the UK details

Lots 1-10 of 36

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
07 Jun 2022 15:50:00 BST
Time left:
Bidding ended
Increment:
£10
Bids:
36
Buyer's premium:
18%
VAT rate:
20%

Lot 10: S F M Twin Roll 48” Long Powered Bending Rolls

S F M Twin Roll 48” Long Powered Bending Rolls

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

 

 

Preview image
Ends:
07 Jun 2022 15:20:00 BST
Time left:
Bidding ended
Increment:
£50
Bids:
22
Buyer's premium:
18%
VAT rate:
20%

Lot 11: M G 3 Roll Pyramid Bending Rolls

M G 3 Roll Pyramid Bending Rolls Model MH 314C with Pre-Bend Arrangement, Driven Rolls Top Roll 200mm x 1250mm Lower Rolls 180mm. Country of Origin: Italy

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...

Preview image
Ends:
07 Jun 2022 16:00:00 BST
Time left:
Bidding ended
Increment:
£100
Bids:
25
Buyer's premium:
18%
VAT rate:
20%

Lot 12: Edwards Truecut DD Guillotine Shear Model 13 – 3000

Edwards Truecut DD Guillotine Shear Model 13 – 3000 with Power Backgauge and Digital Display, Variable Rake, Blade Gap and Stroke Adjustment, 3 Front Support Arms Left Side Square Arm, Footswitch Control. (Customer Notice Capacity on M/C 10mm M.S 15mm Aluminium) Country of Origin: United Kingdom

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork ...

Preview image
Ends:
07 Jun 2022 15:20:00 BST
Time left:
Bidding ended
Increment:
£50
Bids:
11
Buyer's premium:
18%
VAT rate:
20%

Lot 13: Excel Radial Drill Model RD 1100

Excel Radial Drill Model RD 1100 with Box Table and Vice, Spindle Centre to Column 1100mm, Drill Head Travel 800mm, Spindle 4 MT, Speeds 44 – 1500rpm Power Rise and Fall, Spindle Brake, Coolant. S/No. 5209 (2006). Country of Origin: Singapore

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This ...

Preview image
Ends:
07 Jun 2022 16:00:00 BST
Time left:
Bidding ended
Increment:
£50
Bids:
58
Buyer's premium:
18%
VAT rate:
20%

Lot 14: Kingsland Universal Metalworker Model 85XS

Kingsland Universal Metalworker Model 85XS – Punch Capacity 85 Ton, Universal Machine with Punch Station – Angle – Section Cutting – Shearing – Notching Punch 55 Dia Thru 12mm 33 Dia Thru 20mm – Shear Flat Bar 380mm x 20mm – Shear Angle 90° 150mm x 15mm 45° 80mm x 10mm Shear Rounds 50mm. S/No. 980898. Country of Origin: United Kingdom

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice ...

Preview image
Ends:
07 Jun 2022 15:30:00 BST
Time left:
Bidding ended
Increment:
£25
Bids:
49
Buyer's premium:
18%
VAT rate:
20%

Lot 15: Multimatrix Phoenix EWM Mig/Mag Pulse Welder

Multimatrix Phoenix EWM Mig/Mag Pulse Welder 350 Amp – Torch with Remote Handbag Extension Control on Trolley. S/No. 0000533391. Country of Origin: Germany

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...

Preview image
Ends:
07 Jun 2022 15:00:00 BST
Time left:
Bidding ended
Increment:
£25
Bids:
27
Buyer's premium:
18%
VAT rate:
20%

Lot 16: Multimatrix Phoenix EWM Mig/Mag Pulse Welder

Multimatrix Phoenix EWM Mig/Mag Pulse Welder 350 Amp – Torch with Remote Handbag Extension Control on Trolley. S/No. 0000331551. Country of Origin: Germany

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...

Preview image
Ends:
07 Jun 2022 15:10:00 BST
Time left:
Bidding ended
Increment:
£25
Bids:
36
Buyer's premium:
18%
VAT rate:
20%

Lot 17: Multimatrix Phoenix EWM Mig/Mag Pulse Welder

Multimatrix Phoenix EWM Mig/Mag Pulse Welder 350 Amp – Torch with Remote Handbag Extension Control on Trolley. S/No. 0000704087. Country of Origin: Germany

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...

Preview image
Ends:
07 Jun 2022 15:10:00 BST
Time left:
Bidding ended
Increment:
£25
Bids:
14
Buyer's premium:
18%
VAT rate:
20%

Lot 18: Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch

Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch. S/No. 31630. Country of Origin: United Kingdom

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Preview image
Ends:
07 Jun 2022 15:10:00 BST
Time left:
Bidding ended
Increment:
£25
Bids:
15
Buyer's premium:
18%
VAT rate:
20%

Lot 19: Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch

Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch. S/No. 34110. Country of Origin: United Kingdom

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Categories