Dahlih MVC 720 Vertical Machining Centre with Fanuc OI-MD Control, Table size: 950mm x 560mm, Longitudinal Traverse: X Axis - 720mm, Cross Traverse: Y Axis = 460mm, Vertical Traverse: Z Axis = 510mm, Speeds: Up to 8000rpm, Feed Rate: Variable, Spindle Taper: BT40, Automatic Tool Changer, Number of Tools: 30 (2012). Country of Origin: Taiwan

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Gildemeister CTX 400 S2 Lathe, Swing-Ø Over Bed Rail, Cover 570mm, Swing-Ø Over Plan Guide Cover 420mm, X-Axis 220mm, Z-Axis 635mm, Spindle Head Ø 170mm H5, Spindle Head Ø in Front Bearing 120mm, Spindle Bore 79mm, Chuck Ø 200 / 250mm, Speed Range 25 – 5.000rpm, Rapid Traverse X = 20m/min, Rapid Traverse Z = 24m/min, Universal Disc Turret Autom, Switching with Directional Logic (2000), Number of Tool Stations: 12. Country of Origin: Germany

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mazak Nexus 510C Vertical Machining Centre with Mazatrol 640M CNC Control, Axis X: 1049.0mm, Axis Y: 528.0mm, Axis Z: 528.0mm, Rotary Table (4th Axis), Table Length: 1300.0mm, Table width: 550.0mm, Number of Tool Pockets: 30.0, Spindle Taper: CAT 40, Max. Spindle Speed: 12000rpm (2005). Country of Origin: Japan

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

XYZ Proturn VL 355 Lathe, 355mm Swing Over Bed, 225mm Swing Over Cross Slide, 1250mm Between Centres, 52mm Spindle Bore, 40-2200rpm Spindle Speeds, Proto Trak VL Control, 3 Jaw Chuck, Quick Change, Toolpost and Holders, Coolant, Machine Light, Interlocked Chuck Guard. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Matsuura RA 11 F Twin Pallet Vertical Machining Centre, Speed: 8,000rpm (approx.), Spindle Centre to Column: 17.32", Travels: X-Axis: 23.6", Y-Axis: 16.14", Z-Axis: 18.5", Pallet / Table Dimensions: 23.5" x 15", Automatic Tool Changer, BT40 Spindle Taper, 30-Station Automatic Tool Changer, Coolant System, Centralised Lubrication System, RS-232 Port (1994). Country of Origin: Japan

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Colchester Electronic Mastiff Lathe with Fanuc 20-Ta Control, Swing on the Bed 554mm, Between Centres 2000mm, Centre Height 280mm, Swing Over Cross Slide 370mm, Cross Slide Stroke 290mm, Spindle Bore 90mm, Spindle Speed Low Range 16 – 204rpm, Spindle Speed Mid-range 48 – 612rpm, Spindle High Range 140 – 180rpm, Spindle Nose Camlock D1 – 11, Tailstock 6. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Matsuura RA-1X Twin Pallet Vertical Machining Centre with Yasnac J300 CNC Control, X = 548.6mm, Y = 408.9mm, Z = 459.7mm, Power = 5.6 kW, 15000rpm, ATC - 30, Table - 599.4mm x 378.5mm, Taper - BT40 (2001). Country of Origin: Japan

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Dahlih DL-MOV 1020BA Machining Centre with Heidenhain i530 Control, Table size: 1250mm x 660mm, Table Load: 1000kg, X = 1020mm Y = 550mm Z = 560mm, Speeds 1 - 8000rpm, Variable Rapid Feed - 20,000mm/min, Feed rate - 0.04 - 393mm/min, Spindle Taper BT40, Automatic Tools 24, Spindle Motor 10 kW, Coolant and Twin Swarf Screws (2006). Country of Origin: Taiwan

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Asquith Power Thrust 4PT 14-54 Radial Drilling Machines, Spindle Speeds: 9.5 to 1560 (18), Spindle Taper: No 5 Morse, Spindle, Travel: 410mm, Feeds: 0.066 to 0.963, Max Spindle to Base: 70", Column Diameter: 14", Graduations: Metric, Power Locking Equipment, Safety Brake, Box Table, Coolant. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Kearns Richards S Type Horizontal Borer, Main Table: 560 x 405mm, Top Table: 455 x 455mm, Long Traverse: 610mm, Cross Traverse: 320mm, Vertical Traverse: 285mm, Spindle Speeds: 50 – 2000rpm Infinately Variable, Spindle Taper: 40 Int, Feeds: 4- 106mm per min, Electrics: 415v, 3ph, 50 Cycles, Motor: 3HP, Tailstock / Outer Steady, Coolant. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Missler DEB 410 CNC Bandsaw, Max. Material, Dimensions: 410 x 410mm, Energy Consumption: 8,7kW (5,5kW Saw Motor, 2,2 kW Hydraulic), Cutting Speed: 10 - 200m/min, Blade Dimensions: 41 x 1.1 x 5940mm, Feed Step: 500mm, Coolant and Swarf Conveyor, Dimensions: 2.8 x 2.1 x 2.15m, Weight: 4000kg (2006). Country of Origin: France

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Jones and Shipman 1415 Surface Grinding Machine, Table size - 680mm x 290mm, Longitudinal Traverse - 750mm, Cross Traverse - 300mm, Cross Feed - 0.33mm - 3.3mm, Wheel Head Rise & Fall - 310mm by Power, Table Speed - 3 - 24m/min, Input - 415/3/50, Nominal Stone size - 350mm x 50mm Face, Magnetic Chuck - 600mm x 300mm, Coolant. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Dean Smith and Grace Lathe 30 x 216, Centre: Height 15" (381mm), Distance between 216" (5486mm), Swing Over: Bed 32" (813mm), Cross Slide 22" (559mm), Spindle: Speeds: 7.4 - 600rpm, Bore 4.5/8" (118mm), Input: 380/440/3/50 AC 20 HP, Equipment: Fixed & Travelling Steadies, 4 Jaw 30" (762mm) Chuck, 3 Way Tool Post, Imperial Dials, Coolant. S/No. 39052-10-71 (1971). Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Myford MG12-M Cylindrical Grinder, Capacity 125mm x 305mm (5" x 12"), Wheel size 300mm (12") Diameter, Table Dresser, 3 Jaw Chuck, Centres, Coolant. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Myford Cylindrical Manual Grinder, Capacity 125mm x 305mm (5" x 12"), Wheel size 300mm (12") Diameter, Coolant System, 2 Axis DRO System. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Harrison M300 Lathe, distance between Centers: 40″, Swing Over Bed: 13″, Swing Over Cross-slide: 10″, Spindle Speeds: 40 to 2500 (12), Spindle Bore: 1.5″, Full Length Screw Cutting, Tool Post, New 3 Jaw Chuck, Main Motor: 415v, Coolant, Light. Country of Origin: United Kingdom

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Addison CB250A Automatic Horizontal Bandsaw, 10" Diameter Capacity, Hydraulic Downfeeds, 5 Blade Speeds 27 - 80 m/min, Shuttle Vices, Coolant

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Ajax Surface Grinder, 18″ x 10″ Capacity, Max Height under the Wheel is 15”, Magnetic Chuck, Dust Extraction, Metric Calibration

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Wroclaw Fat Tur 63A Lathe with Fanuc OT Control, 300mm Swing Over Cross, 2m between (1996)

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Wroclaw Fat Tur 63A Lathe with Fanuc OT Control, 300mm Swing Over Cross, 2m between (1996)

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Richmond 4ft Radial Drill, Spindle Speeds: 20 to 960 (12), Feeds in inches: from .013 to .004 (4)

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Moore No. 2 C Jig Grinder, Table size: 550mm x 310mm, Table Traverse: 420mm, Cross Traverse: 270mm, Vertical Spindle Traverse: 92mm, Spindle Speeds Planetry 90, 136, 184 & 280rpm, Calibration: Imp. S/No. 299

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Jakobsen 1026 Surface Grinder, 600mm x 250mm Electro-Magnetic Chuck, Spark-Out, Manual Wheel Dresser, Coolant, Fully Automatic Grinding Cycle including Coarse and Fine Grinding Cycle with Sparkout to Finish Size, Hydraulic Table Traverse for Smoothest Finish, Ballscrew Cross Traverse for Precise Cross Positioning and Movement with Servo Saddle Lock, Table Cross Traverse, Intermittent or Continuous During Grinding Cycle, Vertical Traverse by Stepping Servo Motor, Rapid Rise & Fall and Variable Feeds, Built in DRO for Relative Positions of Y & Z Axis, Electronic Manual plus Handwheel for Vertical and Cross Movements.

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Hurco BMC 30HT Vertical Machining Centre (1995) (Spares or Repair (Screen Fault))

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Acme Horizontal Bandsaw

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Adcock & Shipley 1ES Lathe

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Masking Tapping Arm & Table

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Startrite 18V 10 Vertical Bandsaw

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Ajax Power Hacksaw

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Samand Double Ended Grinder

Please Note: This lot is located in County Durham, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.