Dugard Akira Seiki A650 Twin Pallet Vertical Machining Centre. S/No. RVB060023 (2006) Installed New January 2007 with Mitsubishi M65AS Control, Hand Controller, 24 Auto Station Tool Changer, 20 Bar Through Spindle Coolant, Swarf Conveyor, Chip Flushing Coolant Wash Gun, Rotary Twin Auto Pallet Changer, (2) X 650 X 350mm Pallets, Max Table Load 300 Kgs, XYZ Travels = 650 X 350 X 400mm, Rapid Traverses XYZ = 72/48/72 M/Min, Spindle Speeds 150 To 12,000 Rpm, HSK-63A Taper, 1 Second Tool To Tool Change, Machine Weight 5500 Kgs, Machine Height 2600 Mm, Rated Capacity 20 KVA. Country of Origin: Taiwan

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £400 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of HSK 63 Tooling. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of HSK 63 Tooling. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 2, 2A & 2B

Lot 2 - Dugard Akira Seiki A650 Twin Pallet Vertical Machining Centre. S/No. RVB060023 (2006) Installed New January 2007 with Mitsubishi M65AS Control, Hand Controller, 24 Auto Station Tool Changer, 20 Bar Through Spindle Coolant, Swarf Conveyor, Chip Flushing Coolant Wash Gun, Rotary Twin Auto Pallet Changer, (2) X 650 X 350mm Pallets, Max Table Load 300 Kgs, XYZ Travels = 650 X 350 X 400mm, Rapid Traverses XYZ = 72/48/72 M/Min, Spindle Speeds 150 To 12,000 Rpm, HSK-63A Taper, 1 Second Tool To Tool Change, Machine Weight 5500 Kgs, Machine Height 2600 Mm, Rated Capacity 20 KVA. Country of Origin: Taiwan

Lt 2A - Qty of HSK 63 Tooling. Country of Origin: United Kingdom

Lot 2B - Qty of HSK 63 Tooling. Country of Origin: United Kingdom

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £400 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

DAEWOO ACE VC320 Twin Pallet Vertical Machining Centre. S/No. TC3200176 (July 2004) with Fanuc 21imb Control, Hand Controller, 14 Station Auto Toolchanger, Coolant And Chip Auger, Rotary Twin Auto Pallet Changer 2 X 650 X 440mm, Max Load 150 Kg, XYZ Travels = 520/320/350mm, XYZ Feeds = 36/36/48 M/Min, Spindle Speeds To 10,000 Rpm, Spindle Taper BT30, Spindle Power 7.5 Kw. Country of Origin: Korea

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £400 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Rack of BT40 Tooling. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Poly Gim Diamond 32 Csl Swiss Type CNC Turning Centre. S/No. 3280066 (2005) with Mitsubishi Meldas Magic 64 Control, 34mm Main Spindle Up To 8000rpm, 32mm Sub Spindle Up To 8000rpm with 6 Cross Working Driven Tools To 3000rpm, (6) Od Turning Tools, (2) Id Stationary Tools, (2) Front Driven Drilling Tools To 3000rpm, (4) Back Id Stationary Tool, (3) Back Driven Drilling Tools To 3000rpm, Parts Catcher And Conveyor, Fedek Sunny 542 Auto Bar Loader, Model L with 3250mm Capacity, Filtermist Unit, Overall Dimensions 2560 X 1380 X 1910mm (Plus Bar Feed System), Back Tooling. Country of Origin: Taiwan

Please Click here to view a Machine Specification for this Machine

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Collets Suitable for Poly Gim. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Collets Suitable for Poly Gim. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lot 7 - Poly Gim Diamond 32 Csl Swiss Type CNC Turning Centre. S/No. 3280066 (2005) With Mitsubishi Meldas Magic 64 Control, 34mm Main Spindle Up To 8000rpm, 32mm Sub Spindle Up To 8000rpm with 6 Cross Working Driven Tools To 3000rpm, (6) Od Turning Tools, (2) Id Stationary Tools, (2) Front Driven Drilling Tools To 3000rpm, (4) Back Id Stationary Tool, (3) Back Driven Drilling Tools To 3000rpm, Parts Catcher And Conveyo, Fedek Sunny 542 Auto Bar Loader, Model L with 3250mm Capacity, Filtermist Unit, Overall Dimensions 2560 X 1380 X 1910mm (Plus Bar Feed System). Country of Origin: Taiwan

Lot 7A - Qty of Collets Suitable for Poly Gim. Country of Origin: United Kingdom

Lot 7B - Qty of Collets Suitable for Poly Gim. Country of Origin: United Kingdom

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

CMZ TBI 450 MC CNC Turning Centre with C Axis and Live Tools. S/No. 951031 (1995) with Fanuc OT-C Control, E42 Collet Chuck, 160mm 3 Jaw Chuck, 12 Station VDI Turret with Driven Tool Capacity, (2) Driven Tools and Turret Tooling, Parts Catcher, Toolsetter/Tooleye, Tailstock, Sameca Bar Feeder And Coolant Equipment, 450mm Max Swing, 300mm Max Turning Dia, 55mm Spindle Bore, 46mm Max Bar Dia, Spindle Speeds To 6000rpm, Spindle Motor Power 14.5 Kw, X Axis Travel 150 +25mm, Y Axis Travel 590 Mm, Max Distance Between Centres 580mm, Overall Dimensions 2500 X 1450 X 1700 Mm (Not Inc Bar Feed), Machine Weight 3750 Kgs. Country of Origin: Basque Country

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of VDI 30 Tooling suitable for CMZ TBI-450MC. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of VDI 30 Tooling suitable for CMZ TBI-450MC. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of VDI 30 Tooling suitable for CMZ TBI-450MC. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 8, 8A, 8B & 8C

Lot 8 - CMZ TBI 450 MC CNC Turning Centre with C Axis and Live Tools. S/No. 951031 (1995) with Fanuc OT-C Control, E42 Collet Chuck, 160mm 3 Jaw Chuck, 12 Station VDI Turret with Driven Tool Capacity, (2) Driven Tools and Turret Tooling, Parts Catcher, Toolsetter/Tooleye, Tailstock, Sameca Bar Feeder And Coolant Equipment, 450mm Max Swing, 300mm Max Turning Dia, 55mm Spindle Bore, 46mm Max Bar Dia, Spindle Speeds To 6000rpm, Spindle Motor Power 14.5 Kw, X Axis Travel 150 +25mm, Y Axis Travel 590 Mm, Max Distance Between Centres 580mm, Overall Dimensions 2500 X 1450 X 1700 Mm (Not Inc Bar Feed), Machine Weight 3750 Kgs. Country of Origin: Basque Country

Lot 8A - Qty of VDI 30 Tooling suitable for CMZ TBI-450MC. Country of Origin: United Kingdom

Lot 8B - Qty of VDI 30 Tooling suitable for CMZ TBI-450MC. Country of Origin: United Kingdom

Lot 8C - Qty of VDI 30 Tooling suitable for CMZ TBI-450MC. Country of Origin: United Kingdom

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Colchester Student 1800 x 30” Gap Bed Centre Lathe with Mitutoyo 2 Axis Dro, 10” 3 Jaw Chuck and Fixed Steady, Collet Chuck, Quick Change Tool Post with Toolholders, 8” 3 Jaw Chuck, 3 Point Steady, Mitutoyo Linear Scale 2 Axis Digital Readout, 22 to 1800rpm, 42mm Spindle Bore, Distance between Centres 700mm, Swing Over Bed 320mm Diameter. S/No. 4/0008/06815. Country of Origin: United Kingdom

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £150 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Quick Change Tooling. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 10 & 10A

Lot 10 - Colchester Student 1800 X 30” Gap Bed Centre Lathe. S/No. 4/0008/06815 with 10” 3 Jaw Chuck, Collet Chuck, Quick Change Tool Post with Toolholders, 8” 3 Jaw Chuck, 3 Point Steady, Mitutoyo Linear Scale 2 Axis Digital Readout, 22 to 1800rpm. Country of Origin: United Kingdom

Lot 10A - Qty of Quick Change Tooling. Country of Origin: United Kingdom

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £150 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

SEMCO LC185VS Vertical Turret Milling Machine with 2 Axis DRO II 3M Inch Metric Digital Readout, 1270 X 255mm Table, Spindle Speeds 50 to 480rpm Low, 420 to 3750rpm High, Air Power Drawbar, Linear Readout to Quill, light and Coolant, Spindle Taper R8, Power Feeds X & Y Axis, Vari Speed Head. S/No. 51102006 (1996). Country of Origin: Taiwan

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £150 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Startrite 18-S-1 Vertical Bandsaw, Model Supaflex 1831, 114” Blade Length, Table size 480 x 485mm, Throat 457mm, 240V 1ph,  Single Phase. S/No. 21596. Country of Origin: United Kingdom

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Sweeney & Blocksidge No. 6 Manual Fly Press, Mounted on Steel Framed Table with Tooling. Country of Origin: United Kingdom

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

6" Vertical Linisher with 2 Spare Belts. Country of Origin: United Kingdom

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Wolf TG8E 8" Double Ended Grinder, Wheel Speed 2950rpm, 3ph 50hz. S/No. 0607719. Country of Origin: United Kingdom

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Whitecoat 8" Double Ended Tool Post Grinder, PZG 2SP Katowice, 3ph 440V, Wheel Size 250 x 25mm. S/No. 8098-74. Country of Origin: United Kingdom

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

SHOWA Mistresa CRD 750RA-CE-0023 0.75 Kw Portable Mist Collector, Max. Volume 8.0 - 9.6 m3/min. S/No. 159643403 (2006) Country of Origin: Japan

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Hurco 6" Machine Vice. Country of Origin: Taiwan

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Carbide Tips. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of VDI 20 Tooling. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of VDI 20 Tooling. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of VDI 40 Live Tooling

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Angle Plates, 4", 16", 12", 210mm, 7". Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Angle Plates, (2) x 9", (1) x 11 1/2". Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Chucks, 6" 3 Jaw Chuck, 270mm 3 Jaw Chuck, 10" 3 Jaw Chuck, 5" 3 Jaw Chuck and Collet Chuck. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Go & Nogo Gauges. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Depth Gauges. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

STARRETT SIGMA HB400 Optical Comparator/Shadowgraph with Quick Chek 2 Axis Digital Readout, Digital Angle Measurement, 400mm /16” Screen, 10” X 6” Travels, Angle Table +/- 20Deg, Floor Model Mounted on Bench Stand. S/No. 4318 Country of Origin: United Kingdom

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Steel Table 860mm x 900mm with Mitutoyo Height Gauge. Country of Origin: United Kingdom

Please Note: This lot is located in Birmingham, UK. A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

(2) x Height Gauges. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Digital Microscope. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Chopsaw & P-Pro Hammer Drill. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Metal Guillotine. Country of Origin: United Kingdom

Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Steel Table 5ft x 3ft (Excluding Contents). Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Steel Table 4ft x 3ft (Excluding Contents). Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.