Goodway GS-280LM CNC Turning Centre (2007) with Fanuc Series 18i - TB Control, 12 Station Turret, Tailstock, Tooleye, 250mm Dia 3 Jaw Chuck, Driven Tools, 1250mm B/C, C-Axis, Swarf Conveyor, Swarf Bin. S/No. 92041. Country of Origin: Taiwan

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Tooling suitable for Goodway

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Tooling suitable for Goodway

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Tooling suitable for Goodway

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Tooling

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Tooling

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Collets and Collet Holders

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Sleeves

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Hardinge GT-CE CNC Single Spindle Auto Lathe (1996) with GE Fanuc Series 18-T Control, Filtermist F7. S/No. GT-764-B. Country of Origin: U.S.A.

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Hardinge GT-CE CNC Single Spindle Auto Lathe (1997) with GE Fanuc Series 18-T Control. S/No. GTA-989-B 

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

GF Agie Charmilles Mikron HEM 700U CNC 5 Axis Milling Machine (2015) with Heidenhain iTNC 530 Control, Step-tec, 20,000 Spindle, 7 Station System 3R Pallet Changer, 60 Tool ATC, Spindle Taper HSK-A63, Coolant Filtration Spindle Chiller, Pallet Size 360 x 360. S/No. 107.29.00.006 

Please Note: The Step-Tec spindle for this machine has been removed and is in need of repair. Additionally, this machine also requires a new Power Supply and Regenerative Power Supply. Please consider this before bidding.

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

GF Agie Charmilles Mikron HEM 500U CNC 5 Axis Milling Machine (2015) with Heidenhain iTNC 530 Control, Step-tec, 20,000 Spindle, 7 Station System 3R Pallet Changer, 60 Tool ATC, Spindle Taper HSK-A63, Coolant Filtration Spindle Chiller, Pallet Size 360 x 360, Renishaw Probe. S/No.107.28.00.162 

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of HSK 63A Tooling

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of HSK 63A Tooling

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of HSK 63A Tooling

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

GF Agie Charmilles Mikron HEM 500U CNC 5 Axis Milling Machine (2014) with Heidenhain iTNC 530 Control, Step-tec, 20,000 Spindle, 7 Station System 3R Pallet Changer, 60 Tool ATC, Spindle Taper HSK-A63, Coolant Filtration Spindle Chiller, Pallet Size 360 x 360. S/No. 107.28.00.110 

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of HSK 63A Tooling

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

GF Agie Charmilles Mikron HEM 500U CNC 5 Axis Milling Machine (2014) with Heidenhain iTNC 530 Control, Renishaw Probe, 500mm Table Dia, Spindle Taper BT40. S/No. 107.28.00.087 

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of BT40 Tooling

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

GF Agie Charmilles Mikron VCE 1200 Pro CNC VMC (2015) with Heidenhain TNC 530 Control, Spindle Taper BT40, 1222 x 620mm Table, Renishaw TS27R. S/No.108.005.00.0057 

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of BT40 Tooling

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

GF Agie Charmilles Mikron VCE Pro 1000 CNC VMC (2014) with Heidenhain iTNC 530 Control, 40 Tool ATC, Table size 1000 x 560mm BT40 Spindle Taper. S/No. VCE1000+.1055

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Rack of BT40 Tooling

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bridgeport Hardinge XR760 CNC VMC (2013) with Heidenhain Control, 1000 x 600mm Table, Renishaw OTS Probe, 30 ATC, Swarf Conveyor, Spindle Taper BT40. S/No. XRAB3E0005 

Please Note: The 4th Axis Unit is not included with this lot

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mobile Trolley with Large Qty BT40 Tooling suitable for Bridgeport

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Nikken 4th Axis Unit Type CNC 202 BZA

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Chiron FZ15S CNC High Speed 5 Axis VMC, Heidenhain Control ZAS-280-1, Table, 20ATC, Swarf Conveyor, Spindle Taper, CAT 40. S/No. 235-20 (2003)

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of CAT40 Tooling suitable for Chiron

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Chiron FZ15KS CNC High Speed 5 Axis VMC with Heidenhain Control ZAS-280-1, Table, 20ATC, Swarf Conveyor, Spindle Taper, CAT 40. S/No. 191-51 (2005)

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Haimer Power Clamp with Hyfra WMK 7/1-s Hydraulic Unit. S/No.14110421 (2014)

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Speroni STP Magis 400 Vertical Tool Pre-setter. S/No. 0006963

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Agie Charmilles CUT 300 Wire Eroder, Pendant, GF Control. S/No. 591.063.001.0266 (2013) with ICS IC215 Chiller (2016)

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Agie Charmilles CUT 300 Wire Eroder, Pendant, GF Control. S/No. 591.063.050.0055 (2013) with Chiller

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Agie Charmilles EDM Cut 200P Wire Eroder, Pendant, GF Control. S/No.396.900.158.1092 (2012) with ICS IC215 Chiller (2016)

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Agie Charmilles Form 20 Spark Eroder, Pendant, 620 x 400mm Table. S/No. 592.002.001.0005 (2014)

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Alex-Tech AML-618 Precision Dove Table Bed Lathe, 130- 3000rpm, Mitutoyo KM 2 Axis DRO. S/No. 7818048 (1989)

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of 5C Collets suitable for Swift Lathe

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Jones & Shipman 540P Surface Grinder, 18 x 6" Mag Chuck, Powerfeed, Coolant. S/No. BO95365

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Delapena Speedhone-M Model 'S' Horizontal Hone, 250-1000rpm. S/No. 3523/27

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Jones & Shipman 1601 Vertical Cone Grinder. S/No. BO 13389

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Cosen C-260NC Heavy Duty Horizontal Bandsaw. S/No. 26C1030385 (2014)

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Kemet 15 Diamond Flat Polishing Machine with Kemet Electronic Dispenser. S/No. AAA01274

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Kobe DPB500 Bench Drill

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 77, Jaw width: 77mm, Base Length: 102mm, Clamping Range: 0-85mm - 47085/2624 with 70Nm Jaws - 3436 on Lang Quick Point 52 Round Plate, diameter: 157 x 27mm without Mounting Bores - 45901

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 77, Jaw width: 77mm, Base Length: 102mm, Clamping Range: 0-85mm - 47085/3559 with 70Nm Jaws - 3689

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 77, Jaw width: 77mm, Base Length: 170mm, Clamping Range: 0-160mm - 47160/3512 with 70Nm Jaws - 2624

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 77, Jaw width: 77mm, Base Length: 170mm, Clamping Range: 0-160mm - 47160/3432 with 70Nm Jaws - 3559

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 125, Jaw width: 125mm, Base Length: 210mm, Clamping Range: 0-205mm - 47205/4434 with 100Nm Jaws - 4441

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 125, Jaw width: 125mm, Base Length: 210mm, Clamping Range: 0-205mm - 47205/5587 with 100Nm Jaws - 5574/5587

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 125, Jaw width: 125mm, Base Length: 210mm, Clamping Range: 0-205mm - 47205/5576 with Lang Profilo 125 Base Jaws, 160 x 57mm - 49251/2340

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 125, Jaw width: 125mm, Base Length: 210mm, Clamping Range: 0-205mm - 47205/5573 with Lang Profilo 125 Base Jaws, 160 x 57mm - 49251/2288

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 125, Jaw width: 125mm, Base Length: 210mm, Clamping Range: 0-205mm - 47205/4425 with Lang Profilo 125 Base Jaws, 160 x 57mm - 49251/2346/2288

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 125, Jaw width: 125mm, Base Length: 210mm, Clamping Range: 0-205mm - 47205/5611 with Lang Profilo 125 Base Jaws, 160 x 57mm - 49251/2368 on Lang Quick Point Base Plate, 30Nm

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 125, Jaw width: 125mm, Base Length: 210mm, Clamping Range: 0-205mm - 47205/4432 with Lang Profilo 125 Base Jaws, 160 x 57mm - 49251/2378

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 125, Jaw width: 125mm, Base Length: 210mm, Clamping Range: 0-205mm - 47205/4407 with 100Nm Jaws - 5574/5587

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 125, Jaw width: 125mm, Base Length: 210mm, Clamping Range: 0-205mm - 47205/4444 with 100Nm Jaws - 4407/4434

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 125, Jaw width: 125mm, Base Length: 210mm, Clamping Range: 0-205mm - 47205/4430 with 100Nm Jaws -5576

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 125, Jaw width: 125mm, Base Length: 210mm, Clamping Range: 0-205mm - 47205/4428 with 100Nm Jaws -4425

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 77, Jaw width: 77mm, Base Length: 170mm, Clamping Range: 0-160mm - 47160/3436 with 70Nm Jaws - 2117

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lang Makro-Grip 5-Axis Vice 77, Jaw width: 77mm, Base Length: 102mm, Clamping Range: 0-85mm - 47085/2117 with Lang Profilo 77 Base Jaws, 112 x 46mm - 1867 on Lang Quick Point Adaptor Plate, Round, diameter: 157 x 27mm

Please Note: This lot is located in Portland, UK. Unfortunately there are no loading facilities onsite. Dismantling and loading will be to the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.