ONA NX6 Spark Eroder (2016) S/No. 12321 with CNC Control Unit, Work Table XY 1,200 x 800mm, Consisting of Machine-Tool, Microfine Generator for very fine surface finishing (VDI=0), Dielectric Filtration System, X, Y, Z Axis Travel: 1,000 x 600 x 500mm, C axis: 360 degrees, Work Tank dimensions: 1,700 x 1,000 x 600mm, Rise & Fall Door, C axis with Automatic System 3R Chuck, 9 positions Automatic Tool Changer, Ona’s Ecological Long-life Filter, Generator 100 Amps, Dielectric Cooler. (All vices are excluded from the Machine) Country of Origin: Spain

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

3R Tooling Plates and Stems, (Excluding Copper Tooling) Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

3R Tooling Plates and Stems, (Excluding Copper Tooling) Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

3R Tooling. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Correa Diana 20 Bed Mill Machine (2006) Type Diana 20 with 530 Heidenhain Control, 20 - 3000rpm Spindle Speed, Table size 2m x 900mm, CAT50 Tooling. S/No. 624007 (All vices are excluded from the Machine). Country of Origin: Spain

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Centreline Spindle Speeder. S/No. 005710. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Dugard 850 Vertical Machining Centre Model 850 VMC with Heidenhain 530 Control, Table Size 1m x 510mm, BT40 Tooling, 24 Station Tool Changer. S/No. FML14BE05. (All vices are excluded from the Machine). Country of Origin: Taiwan

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

YCM XV560A Vertical Machining Centre (2011) with Heidenhain 530 Control, Table size 700mm x 420mm, 20 Station Tool Changer, BT40 Tooling. S/No. 0341 (All vices are excluded from the Machine). Country of Origin: Taiwan

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

YCM XV560A Vertical Machining Centre (2011) with Heidenahin 530 Control, Table size 700mm x 420mm, 20 Station Tool Changer, BT40 Tooling. S/No. 0351 (All vices are excluded from the Machine). Country of Origin: Taiwan

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Johnford SV-41 Machining Centre with Heidenhain 530 Control, 24 Station Tool Changer, BT40. S/No. MBB11482 (2011) (All vices are excluded from the Machine). Country of Origin: Taiwan

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Lemoine Programmable Machine Station with Computer and Screen. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Lemoine Programmable Machine Station with Computer and Screen. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Lemoine Programmable Machine Station with Computer and Screen. Country or Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Lemione Read Out only Machine Station with Computer and Screen. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Read Out Only Machine Station with Screen. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Johnford SV-41 Machining Centre with Heidenhain 530 Control, Table size 1.2m x 800mm, 24 Station Tool Changer, BT40. S/No. MBB8440 (All vices are excluded from the Machine). Country of Origin: Taiwan

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

SMX SLV Turret Mill (2016) with Prototrak SMX Control, Table Size 1480mm x 300mm. S/No. 12741 (All vices are excluded from the Machine). Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

SMX 2000 Turret Mill with Prototrak SMX Control, Table Size 1.2m x 250mm. S/No. 112210 (All vices are excluded from the Machine). Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Jones & Shipman 540 Surface Grinder, 10" x 5" Magnetic Chuck with Coolant. S/No. B075721. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

XYZ 618 Surface Grinder with Meister BC10 D.R.O., 18" x 6" Magnetic Chuck, Coolant. S/No. 9800409. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Colchester Student 1800 Lathe with Sony D.R.O., 200mm 3 Jaw Chuck, 250mm 4 Jaw Chuck, 1m between Centres. S/No. 4/004/09705DD. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Archdale 6ft Radial Drill, Box Table 1.3m x 760mm x 500mm. S/No. RD12987. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Startrite 316 H Vertical Bandsaw, Table Size 700mm x 660mm, Throat Size 900mm. S/No. 98434. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Optimum Horizontal Bandsaw (2018). S/No. 3300185. Country of Origin: Germany

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

PPU3 Tool & Cutter Grinder. Country of Origin: China

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

5 Speed Bench Pillar Drill. S/No. 07080839. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

JO/KE Spot 3 Tig Welder with Trolley. Country of Origin: Germany

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Butters AMT AC/DC 315 Welder. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Shot Blast, Door Size 450mm x 350mm. County of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Airko Compressor Type Solution 11SC (2015), Max Pressure 5 - 10 Bar. S/No. 21711910-11501933013. Country of Origin: Austria

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Almig Combi Compressor Model Alub Blue S Plus. S/No. 583.04055. Country of Origin: Germany

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Mark Compressor Type MAXP15/8BP (2004). S/No. CAI117128 with Mark MDX1800 Dryer. Country of Origin: Italy

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Abus Crane with Street Electric Hoist, SWL 5000kg, 4.2m Width x 17m Length Approx. x 4.5m Height Approx. with Street Hoist. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Pelloby 2 Ton Mobile Extendable Gantry Crane, 4.4m Length x 2m Width x 3.6m Height. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Lansing Gas Fork Lift Truck Type H30T-03 (1999) Capacity 3000kg. S/No. H2X351K03617. Country of Origin: United Kingdom

Please Note: This lot is subject to a late release date.

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Pedestrian Tool Lift, SWL 1000kg. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Pedestrian Tool Lift, Capacity 1000kg. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Bench with Qty BT40 Tooling. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Bench with Qty CAT50 Tooling. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Box of BT40 Tooling. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Box of BT40 Tooling. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

ShrinkIN Tool Heater and Qty of Heat Shrink Collets. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Qty of Boring Heads. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Qty of Tapping Heads. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Qty of Heat Shrink Chucks. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Qty of End Mills. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Qty of Cutters. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Qty of Collets. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Qty of Collets. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Qty of Drills. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Qty of Drills. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Clarke 7 Draw Mobile Trolley with Qty of Drills, Cutters and Reamers. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Stanley Storage Cabinet with Qty of Cutters. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Sealey 5 Drawer Mobile Cabinet with Qty of Drills. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Tapping Head. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Tapping Head. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Qty of Lenzkes Clamps. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Qty of Lenzkes Clamps. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Qty of Lenzkes Clamps. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.

Clarke 7 Draw Mobile Trolley with Qty Carbide Tips, Carbide Tip Holders and Boring Bars. Country of Origin: United Kingdom

Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: All our invoices are issued on an Incoterms EXW (Ex Works) basis. A charge of £45 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations should you be successful in purchasing this item. This process is now a mandatory UK export requirement from 1st January 2021.