Biglia B501 YS CNC Lathe (2001) with Fanuc 18i-T Control, Kitagawa B-210 3-Jaw Chuck/Crawford CDC 66 Collet Chuck on Main Spindle, Kitagawa B-206 3-Jaw Chuck on Sub-spindle, 12 Position Turret – Bi-directional, Driven Tooling & Y Axis Tool Setting Arm, Hydrafeed Multifeed ML1B Bar Feed, Parts Catcher, Swarf Conveyor

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Birmingham. A charge of £500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Doosan S310 SMLY CNC Lathe (2003) with Fanuc 18i-TB Control, Hydrafeed Multifeed 3-80N Bar Feed, X/Y/Z/E/C, Tooleye, Parts Catcher S/No. LNU-1033 

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Birmingham. A charge of £500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Tooling suitable for Doosan S310

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Tooling suitable for Doosan S310

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Combination of lots 2, 2A & 2B

2. - Doosan S310 SMLY CNC Lathe (2003) with Fanuc 18i-TB Control, Hydrafeed Multifeed 3-80N Bar Feed, X/Y/Z/E/C, Tooleye, Parts Catcher. S/No. LNU-1033 

2A - Tooling suitable for Doosan S310 Lathe

2B - Tooling suitable for Doosan S310 Lathe

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Birmingham. A charge of £500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Doosan Puma TT 1800SY CNC Lathe (12/2006) with Fanuc 18i-TB Control. S/No. PT18SY0119, (2) x 12 Station Turrets, Sub Spindle, Tooleye, Parts Catcher, Bar Feed, Swarf Conveyor

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Birmingham. A charge of £500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Gildemeister Twin 32 CNC Lathe (2001) with Siemens Sinumerik Control, (2) x 12 Station Turrets, (2) x 51/2" 3 Jaw Chucks, Swarf Conveyor, Extraction System. S/No. 07200001561 (2001)

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Birmingham. A charge of £400 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of Tooling

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Qty of Tooling

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Qty of Tooling

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Qty of Tooling

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Qty of Tooling

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Qty of Tooling

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Combination of lots 4, 4A, 4B, 4C, 4D, 4E & 4F

Lot 4 - Gildemeister Twin 32 CNC Lathe (2001) with Siemens Sinumerik Control, (2) x 12 Station Turrets, (2) x 51/2" 3 Jaw Chucks, Swarf Conveyor, Extraction System. S/No. 07200001561 (2001)

Lot 4A - Qty of Tooling

Lot 4B - Qty of Tooling

Lot 4C - Qty of Tooling

Lot 4D - Qty of Tooling

Lot 4E - Qty of Tooling

Lot 4F - Qty of Tooling

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Birmingham. A charge of £400 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Colchester Tornado 80 CNC Lathe (1998) with Fanuc 21i-T Control, 6" Chuck, 12 Station Turret, Tailstock. S/No. T70113 

Please Note: This lot is located in Birmingham. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of VDI Tooling

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

VDI 30 Tooling Suitable for Colchester Tornado

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

VDI 30 Tooling Suitable for Colchester Tornado

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Combination of lots 5, 5A, 5B & 5C

Lot 5 - Colchester Tornado 80 CNC Lathe (1998) with Fanuc 21i-T Control, 6" Chuck, 12 Station Turret, Tailstock. S/No. T70113

Lot 5A - Qty of VDI Tooling

Lot 5B - VDI 30 Tooling Suitable for Colchester Tornado

Lot 5C - VDI 30 Tooling Suitable for Colchester Tornado

Please Note: This lot is located in Birmingham. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Colchester Tornado 80 CNC Lathe (1996) with Fanuc 21-T Control, 6" Chuck, 12 Station Turret. S/No. T80197

Please Note: This lot is located in Birmingham. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of VDI Tooling

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

VDI 30 Tooling Suitable for Colchester Tornado

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Combination of lots 6, 6A & 6B

Lot 6 - Colchester Tornado 80 CNC Lathe (1996) with Fanuc 21-T Control, 6" Chuck, 12 Station Turret. S/No. T80197

Lot 6A - Qty of VDI Tooling

Lot 6B - VDI 30 Tooling Suitable for Colchester Tornado

Please Note: This lot is located in Birmingham. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hurco TM8 CNC Lathe with Max Control, Tooleye, Tailstock, 8" 3 Jaw Chuck, 10 Station Turret. S/No. TM8-01107055AAA

Please Note: This lot is located in Birmingham. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hurco VM1 Vertical Machining Centre (2006) with Max Control, 16 Tools, ATC, 8,000rpm Spindle, Table Size 760mm x 350mm. Manufacturer No. H-V11659

Please Note: This lot is located in Birmingham. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of Cat40 Tooling with Rack

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Hurco 6” Vice and Touch Tool Setting Block

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Hurco VM1 Vertical Machining Centre (2003) with Max Control, 16 Station ATC, Table Size 760 x 350mm. S/No. H-V10158

Please Note: This lot is located in Birmingham. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of CAT40 Tooling with Mobile

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Combination of lots 9 & 9A

Lot 9 - Hurco VM1 Vertical Machining Centre (2003) with Max Control, 16 Station ATC, Table Size 760 x 350mm. S/No. H-V10158

Lot 9A - Qty of CAT40 Tooling with Mobile

Please Note: This lot is located in Birmingham. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

TOS Kurim Finesa FNK 25 Milling Machine with 2-Axis D.R.O, Slotting Head, Newhall DP7 Dro, Table size 1250mm x 290mm, Slotting Attachment. S/No. 18230

Please Note: This lot is located in Birmingham. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

TOS F2VCNC MEP Turret Mill (1995) with Heidenhain 360 Control, Table size 1000mm x 250mm. S/No. 00671

Please Note: This lot is located in Birmingham. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Colchester Bantham 1600 Lathe with 500mm Distance between centres, 120mm Swing, Sino DRO and Quick Change Tooling and (2) 5'' 3-Jaw Chucks

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £100 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Colchester Triumph 2000 Copying Lathe, 10" 3 Jaw Chuck, Distance between Centres 1.3m, Gap Bed, Quick Change Tooling, Haudraulic Copying Unit, 3 Point Steady. S/No. 6/0002/19383

Please Note: This lot is located in Birmingham. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of Quick Change Tooling

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Qty of Quick Change Tooling

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Combination of lots 12, 12A & 12B

Lot 12 - Colchester Triumph 2000 Copying Lathe, 10" 3 Jaw Chuck, Distance between Centres 1.3m, Gap Bed, Quick Change Tooling. S/No. 6/0002/19383

Lot 12A - Qty of Quick Change Tooling

Lot 12B - Qty of Quick Change Tooling

Please Note: This lot is located in Birmingham. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Colchester Triumph 2000 Lathe with Newall DP7 D.R.O, 10" 3 Jaw Chuck, Distance between Centres 1.3m, Gap Bed, Quick Change Tooling. S/No. 6/0044/22398

Please Note: This lot is located in Birmingham. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of Quick Change Tooling

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Combination of lots 13 & 13A

Lot 13 - CColchester Triumph 2000 Lathe with Newall DP7 D.R.O, 10" 3 Jaw Chuck, Distance between Centres 1.3m, Gap Bed, Quick Change Tooling. S/No. 6/0044/22398

Lot 13A - Qty of Quick Change Tooling

Please Note: This lot is located in Birmingham. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Meddings M4/3 3-Spindle Drill, Table size 52" x 18". S/No. 014608

Please Note: This lot is located in Birmingham. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Atlas Copco GX11 Compressor (2003), Max Working pressure 10 Bar. S/No. AII 628 351

Please Note: This lot is located in Birmingham. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Clarkson Tool & Cutter Grinder, Capacity 12 x 16 Dia. S/No. 399

Please Note: This lot is located in Birmingham. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Amada Quattro 1kw C02 Laser Cutter. S/No. 00440174 (10/2002) with Fanuc 160i-L Control, AF1000E Laser, 1.2m x 1.25m Cutting Area, Power Required 25kva, Reidel PC 80.01-NE Chiller. S/No. 0-0598-80, Donaldson Torit DCE DF+4 spktrp Fume Extractor. S/No. 53101919. Resonator replaced Nov 2019.

Please Note: This lot is located in Bodmin, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Amada Promecam APX 50.20 Press Brake (04/1997) Maximum Stroke 100mm, Maximum Tonnage 500kn, CNC Type: OPE-2, Working Area 2m. S/No. APX 50 20 A970402 

Please Note: This lot is located in Bodmin, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Miyano BNJ-42SY 5-Axis Twin Spindle CNC Lathe with Short Magazine Barfeed. S/No. BN90100Y (05/2007) Qty of Static Tool Holders

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Birmingham. A charge of £500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(2) x Axial Driven Tools, (1) x Radial Driven Tool

Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(2) x Axial Driven Tools, (1) x Radial Driven Tool

Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(2) x Axial Driven Tools, (1) x Radial Driven Tool

Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of Lots 19, 19A, 19B & 19C

19 - Miyano BNJ-42SY 5-Axis Twin Spindle CNC Lathe with Short Magazine Barfeed. S/No. BN90100Y (05/2007)

19A - (2) x Axial Driven Tools, (1) x Radial Driven Tool

19B - (2) x Axial Driven Tools, (1) x Radial Driven Tool

19C - (2) x Axial Driven Tools, (1) x Radial Driven Tool

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Birmingham. A charge of £500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Citizen A20 VIPL Sliding Head CNC Lathe, Serial no. AB0231 (2007) with Imeca Smart 316 Type 32LL Bar Feed, Serial No. 020709RA03 (2007)

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Birmingham. A charge of £500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Citizen Cincom M20 Sliding Head Lathe Machine (2000) with Citizen Control and Swarf Conveyor. S/No. P12206 with Iemca Genius 226/37 Barfeed. S/No. 0200045B06 (2000)

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Birmingham. A charge of £500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of BT40 Tooling

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Qty of BT40 Tooling

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described

Missler Type DEB 540CE Bandsaw, 540mm Capacity. S/No 54009071 (2002)

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Macc TA400 Chop Saw. S/No. 113723

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer.

Bank of 5 Meddings Drills with Cast Table, Table Size 2300mm x 450mm

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £100 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer.

Qty Collets, Size 177E suitable for Miyano BNJ Machines: 1 1/8", 20.8mm, 1 3/4", 1 1/4", 1 3/4", 40.5mm, 36mm, 2", 42mm, 1 5/8", 35mm, 1 1/2", 46.5mm, 1 1/2", 1 7/8"

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer.

Qty Collets, Size 177E suitable for Miyano BNJ Machines: 40mm, 35.7mm, 31mm, 30mm, 42mm, 26mm, 7/8", 16mm, 1 1/4", 35mm, 24mm, 1/2", 19mm, 12mm, 1", 46mm, 41.5mm

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer.

Qty Collets, Size 177E suitable for Miyano BNJ Machines: 1", 24mm, 30mm, 19mm, 22.225mm, 34mm, 28mm, Square 12mm & 1/2"

Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Technical Information has been obtained from Supplied Documentation and accuracy should be checked by the buyer.