Offers will be considered on the main items prior to the auction, please contact the auctioneer on: + 44 (0) 121 328 2424 or email: info@cottandco.com

Battenfeld Gloucester 5-Layer PP & PE Cast Film Extrusion Line, S/No. A15488/EKK1718 (2000), 20µm - 360µm, Max Output 500kg/h, Die Width 2700mm, Finished Width 2300mm, 'A' Extruder 150mm dia, 30:1 LD Twin Helix, 6-Zone, with Maddox Mixing, Vollmar 5 Component Gravimetric Blender with Re-Trim Feed, 'B' Extruder 90mm dia, 30:1 LD Twin Helix with Madox Mixing, Vollmar 5 Component Gravimetric Blender, 'C' Extruder 70mm dia, 30:1 LD Twin Helix with Madox Mixing, Vollmar 5 Component Gravimetric Blender, Cloreren Epoch II Die & Feedblock, Dynisco Screen Changer, Extrol Cast Line Control System, Twin-Roll Cast/Cooling x 700mm dia Section, Thermofisher Beta Gauge Scanner with Krypton 85 Source, Softal Double Sided Corona Discharge Treater, Herbold Granulator, Gloucester Phantom Indexing Turret Winder, 3 x 6", 3 x 3" dia Rewind Shafts, Hydraulic Core Puller, Floor Mounted Gantry System with Abus 3.2T Pendant Electric Chain Hoist, Rietsche Thomas Covac Skid Mounted Vacuum Pump, Becker VTLF 250 Vacuum Pump, Chilled Water Tank/Pumping Station, Dust Collection.

Please Note: The clearance deadline for this is lot has been extended to 24th September 2020

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(4) x Stainless Steel Day Bins with Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4629 (2014)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Spare & Unused Cloreren V-Block

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

* Combination of lots 1 & 1A

Lot 1 - Battenfeld Gloucester 5-Layer PP & PE Cast Film Extrusion Line, S/No. A15488/EKK1718 (2000)

Please Note: The clearance deadline for this is lot has been extended to 24th September 2020

Lot 1A - 4 x Stainless Steel Day Bins with Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4629 (2014)

Lot 1B - Spare & Unused Cloreren V-Block

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Battenfeld Gloenco 5-Layer PP & PE Cast Film Extrusion Line (1986 - 2010) 20µm - 600µm, Max Output 400kg/h, Die Width 2300mm, Finished Width 2000mm, 'A' Extruder 150mm dia, 30:1 LD Twin Helix, 6-Zone, with Hydreclaim 6 Component Continuous Blender with Re-Trim Feed, 'B' & 'C' Extruders 90mm dia, 30:1 LD Twin Helix with Madox Mixing, 5-Zone, Maguire 4 Component Gravimetric Batch Blenders, Cloreren Epoch Design Die & Feedblock with Temperature Controlled Deckles, 3 x Dynisco Screen Changers Installed 2018, Excelsior Cast Line Control System, Twin-Roll Cast/Cooling x 500mm dia Section, Thermofisher L400 Scanning Frame Installed 2017, Sherman Double Sided Corona Discharge Treater, Herbold Granulator, Wintech Indexing Turret Winder, 3 x 6", 3 x 3" dia Rewind Shafts, Hydraulic Core Puller, Chilled Water Tank/Pumping Station, Dust Collection.

Please Note: Mezzanine Floor is not included

Please Note: The clearance deadline for this is lot has been extended to 24th September 2020

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(4) x Stainless Steel Day Bins with Lift-All Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4630 (2014)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

* Combination of lots 2 & 2A

Lot 2 - Battenfeld Gloenco 5-Layer PP & PE Cast Film Extrusion Line (1986 - 2010)

Please Note: The clearance deadline for this is lot has been extended to 24th September 2020

Lot 2A - (4) x Stainless Steel Day Bins with Lift-All Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4630 (2014)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Summit Moretto Portable Gravimetric Blender with MPI WSB-400 Series Scale, Morreto Fan

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Jenco HD100 Portable Hopper/Dryer. S/No. 66096

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Jenco HD100 Portable Hopper/Dryer. S/No. 31406

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Atlas CSE 620 Centre Surface Slitter/Rewinder. S/No. 95014 (1995) Nominal Speed 600m/min, Unwind Web Width Min 500mm/Max 2200mm, Max Reel Diameter 800mm, Upgraded Splice Table fitted with (2) Web Clamps (2015),) )2 x Edge Trim Rewind Arms, (2) x Bobbin Reel Trim Winders, Upgraded Fife CCS Edge/Line Guide with Powered Electric Actuator (2019), Continuous or Broken Edge Line without Oscillation, (2) x Spare Drum Rollers, Sheer/Slitting Bar

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Floor Mounted Overhead Gantry 350kg SWL with Bectel Horizontal/Vertical/Rotational Reel Loader. S/No. P19696 (2016)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

* Combinationof lots 6 & 6A

Lot 6 - Atlas CSE 620 Centre Surface Slitter/Rewinder. S/No. 95014 (1995) Nominal Speed 600m/min, Unwind Web Width Min 500mm/Max 2200mm, Max Reel Diameter 800mm, Upgraded Splice Table fitted with (2) Web Clamps (2015), (2) x Edge Trim Rewind Arms, 2 x Bobbin Reel Trim Winders, Upgraded Fife CCS Edge/Line Guide with Powered Electric Actuator (2019), Continuous or Broken Edge Line without Oscillation, (2) x Spare Drum Rollers, Sheer/Slitting Bar,

Lot 6A - Floor Mounted Overhead Gantry 350kg SWL with Bectel Horizontal/Vertical/Rotational Reel Loader, S/No. P19696 (2016)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Jenco Hopper/Dryer Additive Bagging Station

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Ro-An Freedom Series RSU-30 Pouch Machine. S/No. RSU-30-109 (2006) Parker CTC Plc Control, Speed (2) x 130 Bags/min, Max Reel Dia Unwind 1000mm, Max Web Width 1520mm, Bag Width Min 80mm/Max 320mm, Bag Length Min 200mm/Max 700mm, Inner Core Unwind Dia 76mm, Perforation, Slitting, Zipper, Machine Length 25.3m, Configuration: Flat Pouch (No Gusset) Folded/Sealed Bottom/Zip, Folded Gusset Pouch (K or Doy) with Pressure Valve/Zip, Wicketted Pouch with Zip/Folded Gusset, Euro Slot, Handle Punch, Tear Notch

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Ro-An Freedom Series R35-24 Pouch Machine. S/No. RSU-24-100 (2007) Parker CTC Plc Control, Speed (2) x 160 bags/min, Max Reel Dia Unwind 1000mm, Max Web Width 1520mm, Bag Width Min 80mm/Max 320mm, Bag Length Min 200mm/Max 550mm, Inner Core Unwind Dia 76 & 152mm, Perforation, Slitting, Zipper, Machine Length 16.5m, Configuration: Flat Pouch (No Gusset) Folded/Sealed Bottom/Zip, Side Gusseted Pouch, Pouch with Fin Seal, Euro Slot, Handle Punch, Tear Notch

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Elsner AFR-18 Film, Foil & Paper Rewinder. S/No. 52840-031 (2009) with Floor Mounted Gantry/Electric Chain Hoist

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Freemantle SO7 Semi Automatic End Load Cartoner. S/No. 10-526 (10.2010) with Nordson Mesa 4.2 HG Hot Glue Applicator, Sauven Codajet Printer

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Dalmec 400kg SWL Articulated/Travelling Reel Hoist with Suspended Gantry

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bectel Articulated Floor Mounted Jib with 250kg SWL Electric Chain Hoist, Pneumatic Reel Lift

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Load King Vertical Compacting Baler

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Green Bank Vertical Compacting Baler

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Herbold SML 30 50 L3-2 Granulator. S/No. C5970 (1993) with Blades

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Abus 1T SWL Underslung Single Beam Travelling Crane with Pendant Controlled Electric Chain Hoist with Twin Post Floor mounted Gantry (Requires 2 Further uprights to be Free Standing). S/No. 17/491006

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

TAE Evo 121 Refrigerant Chiller. S/No. 2200147424 (2009)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Boge SLF 125-3 Variable Speed Compressor. S/No. 5118384 (2018)

Please Note: This lot is located at Deeside. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. 

Kaeser ASD 47 Variable Speed Air Compressor. S/No. 1630 (2009)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

HPC Plusair BS61 Screw Compressor

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Trane RTAD 150 Air-Cooled Helical Rotary Liquid Chiller. S/No. EKA4988 (2008)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Thorworld Industries SMY249040FW6 10,000kgs SWL Mobile Yard Ramp. S/No. T62614YR (2016) with Manual Jack

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

40'0" Seafreight Shipping Container, Lighting

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

45'0" Seafreight Shipping Container

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

45'0" Seafreight Shipping Container

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Baler Services Hydraulic Yard Baler

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Abbey Design Slitter/Rewinder (Spares or Repairs)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Robopac 506 PFS Rotary Stretch Wrapper. S/No. KN070112 (2005)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(36) Bays Link 51H Adjustable Pallet Racking, (9) Bays of Link 51E Adjustable Pallet Racking (Contents of racking not included)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Bectel/STS 120Kg SWL Battery Operated High Reach Truck. S/No. 739 with Single Beam Jib

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

500KG SWL Portable 'A' Frame

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hyster H2.50XMX 2390kg x 3300mm LPG Counterbalance Fork Lift Truck. S/No. H177B56769C (2005) with Twin Stage Mast, Sideshift, Solid Tyres, Fold Down Cabin, Snow Plough Attachment, Fork Extensions

(Please Note: This lot is subject to a late release date)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Cascade 35E.QPB.Q00 Hydraulic Push/Pull Fork Lift Attachment. S/No. 176774.01, 1600kg Capacity

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Manual 250kg Capacity High Reach Truck

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Dale 100kg Reel Lifter. S/No. 59234 (2015)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(7) x Work Benches

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(10) x Product Tables

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

A-Safe Traffic Barriers

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Stainless Steel Work Area with Lighting & Sink (Other lots shown are not inlcuded)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Witt Leakmaster EASY Package Leak Detector

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Heat Sealer

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(2) x Belmont MW0 1000 Microwave Ovens

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Cardinal Detecto 204S Platform Scales. S/No. E08103-0045

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(6) Portable Day Bins

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Dinamec DMC 220 SM Thermal Cleaning System. S/No. 4V059 (1997)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Reitsche Covac SMV300 Vacuum Pump (2017)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Star 101 Mk4 Universal Heat Sealer, S/No. 3990245

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Ray-Ran Melt Flow Indexer

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Burco 1000w Microwave Oven

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sontex Star S-91 Mk5 Universal Heat Sealer. S/No. 10535/91

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

RDM HSB1 Heat Sealer. S/No. 2093

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

GL Instruments AFG 100N Advanced Force Gauge

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.