Miyano ABX- 64SYY 9-Axis CNC Turning Centre with Fanuc 31i-A Control, Twin Spindle Twin Turrets - both with Y axis, Renishaw Tool Setter, Hand Controller, Parts Catcher, Parts Conveyor, Maximum Work dia  64mm, Max Work Length 118mm, Spindle 1 Hydraulic Chuck size 6” dia. 15/11kw Speeds to 4000rpm, Spindle 2 Hydraulic Chuck size 6” dia.  7.5/5.5kw Speeds to 4000rpm, (2) x 12 Station Turrets each with 12 Driven Stations to 6000rpm, Swarf Conveyor & Iemca Kid 80 Type 16 1m Short Magazine Bar Loader. S/No. CM640006 (04/2011)

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Miyano BNJ-51SY2 7-Axis Twin Spindle CNC Turning Centre with Fanuc 32i-A Control, Twin Spindle, Twin Turret and Y axis, 51mm Bar Capacity on Left Spindle, 42mm Capacity on Right Spindle, Max Turning Length 100mm, Main Spindle max 5000rpm, Motor 7.5/11kW, Right Spindle max 7000rpm, Motor 3.7/5.5kw, Right Spindle Slide Travel X2 axis 70mm, Z2 axis 525mm, 12 Station Main Turret – Slide Travel X1 165mm, Z1 246mm, Y1 ±40mm, (Main Turret has all 12 Stations/Tools Driven) Tool Speed Range to 4000rpm, 6 Station Segmental Back Working Turret, Parts Catcher, Parts Conveyor, Swarf Conveyor, Iemca Kid 80 Type 16 Short 1m Automatic Bar Feeder. S/No. BN96020Y (02/2008)

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Miyano BNJ-51SY6 7-Axis Turning Centre with Fanuc 0i-TF Control, Twin Spindle, Twin Turret with Y axis on Main Turret, Renishaw Tool Setter, Hand Controller, Parts Catcher, Parts Conveyor, NovaXess Swarf Conveyor, Cleanmist CM 500 Unit, Stat X Automatic Fire Suppression System, Maximum Work dia  51mm, Max Work Length 100mm, Spindle 1: 6” Thru-hole Chuck, 15/11kw Speeds to 5000rpm, Spindle 2: 5” Thru-hole Chuck 7.5/5.5kw Speeds to 5000rpm, Turret 1: 12 Station Turret each with 12 Driven Stations to 6000rpm, Turret 2: 8 Station Turret with 4 Driven Stations to 3000rpm with Various Turret Toolholders and Radial and Axial Driven Tools, Iemca Boss 552 HD type 21L 1m Short Magazine Bar Loader. S/No. DV5Y0024 (10/2015)

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Citizen Cincom L32 -X 8 Axis CNC Sliding Headstock Turning Centre, Model L32 1M10 with CINCOM System M70LPC-VU Control, Oversize 38mm Bar capacity, Max Machining Length: 320mm, Switchable between Guide Bush Mode or Non-guide Bush Mode, Main Spindle Collet Sleeve dia 38mm, max 8000rpm, motor 3.7/7.5kw, Sub Spindle Collet Sleeve dia 38mm, max 8000rpm, motor 2.2/3.7 kW, 6 Gang Turning Tools 5 Gang Rotary Tools, Y2 axis (Back Tool Post Y axis) Rotary Tools (4 Rotary Fixed Tools in Upper Row & 5 Fixed Tools in the Lower Row), 3 Rotary Tools on the opposite Tool Post, Parts Catcher, Parts Conveyor, Part Off Tool Breakage Detection – Probe Type, Cutting Oil Level Detection, Hydra Jet CM 20 2000 6 High Pressure Coolant Sytem, Absolent A Mist 20S Fume Exractor, Stat X Automatic Fie Extinguisher, Special NC functions: User Macro, Synch Rotation of Main and Sub Spindle, Canned Cycle for Drilling, Tool Nose Radius Compensation Function, Main Spindle 1 Degree Indexing, Sub Spindle 1 Degree Indexing, Network I/O Function, Main Spindle C Axis Control, Sub Spindle C Axis Control, Geometric Function, Constant Surface Speed Control for Main and Sub Spindles, Multi Repetitive Cycle, B Code Function, Compound Fixed Cycles, Corner Chamfer and Radius, Spindle Speed Fluctuation Detection, Milling Interpolation, Synchronous Tapping Function, Continuous Threading Cycle, Helical Compensation Function, Rigid Tapping Function to Main and Sub Spindles, Rotary Tool – Tapping Function, Cromar Type A Swarf Conveyor & IEMCA Boss 338 HD/R Type 32 LL Bar Feeder. S/No. V30346 (2016) Made in Japan

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Citizen A32 -VIIPL CNC 7-Axis Sliding Headstock CNC Turning Centre, Model A32-  2M7P with CINCOM System Control, 32mm Bar Capacity, Max Machining Length 320mm, Main Spindle Collet Sleeve dia 32mm, Max 8000rpm, Motor 5.5/7.5 kW, Sub Spindle Collet Sleeve dia 32mm, Max 8000rpm, Motor 2.2/3.7 kW, 6 Gang Turning Tools, 4 Rotary Tools, + GSE1710 3 Front Rotary Tools and 3 Back Rotary Tools, Back Tool Post GSC1110 4 Rotary and 1 Fixed Tools U151B, Parts Catcher, Parts Conveyor, Part Off Tool Breakage Detection – Probe Type, Cutting Oil Level Detection, Hydrajet CM 2000-6 High Pressure Coolant System, Absolent A Mist 20 Fume Extractor, Stat X Automatic Fire Extinguisher, Special NC Functions: User Macro, Synch Rotation of Main and Sub Spindle, Canned Cycle for Drilling, Tool Nose Radius Compensation Function, Main Spindle 1 Degree Indexing, Sub Spindle 1 Degree Indexing, Network I/O Function, Main Spindle C Axis Control, Sub Spindle C Axis Control, Geometric Function, Constant Surface Speed Control for Main and Sub Spindles, Multi Repetitive Cycle, B Code Function, Compound Fixed Cycles, Corner Chamfer and Radius, Spindle Speed Fluctuation Detection, Milling Interpolation, Synchronous Tapping Function, Continuous Threading Cycle, Helical Compensation Function, Sub Spindle Threading Function, Rigid Tapping Function to Main and Sub Spindles, Rotary Tool – Rigid Tapping Function. LNS Turbo MH500 Swarf Conveyor & Iemca Boss 332 e/R/ Automatic Bar Feeder. S/No. V25147(04/2014)

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Citizen A32 -VIIPL CNC 7-Axis Sliding Headstock CNC Turning Centre, Model A32-IM7PL with CINCOM System Control, 32mm Bar Capacity, Max Machining Length 320mm, Main Spindle Collet Sleeve dia 32mm, Max 8000rpm, Motor 5.5/7.5 kW, Sub Spindle Collet Sleeve dia 32mm, max 8000rpm, Motor 2.2/3.7 kW, 6 Gang Turning Tools, 4 Rotary Tools, + 4 Front Drilling Tools and 4 Back Drilling Tools, Back Tool Post 5 Fixed Tools, Parts Catcher, Parts Conveyor, Part Off Tool Breakage Detection – Probe Type, Cutting Oil Level Detection, Coolblaster High Pressure Coolant System, Absolent A Mist 10 Fume Extractor, Nobel 250ME Fire Suppression System, Special NC Functions: User Macro, Synch Rotation of Main and Sub Spindle, Canned Cycle for Drilling, Tool Nose Radius Compensation Function, Main Spindle 1 Degree Indexing, Sub Spindle 1 Degree Indexing, Network I/O Function, Main Spindle C Axis Control, Sub Spindle C Axis Control, Geometric Function, Constant Surface Speed Control for Main and Sub Spindles, Multi Repetitive Cycle, B Code Function, Compound Fixed Cycles, Corner Chamfer and Radius, Spindle Speed Fluctuation Detection, Milling Interpolation, Synchronous Tapping Function, Continuous Threading Cycle, Helical Compensation Function, Sub Spindle Threading Function, Rigid Tapping Function to Main and Sub Spindles, Rotary Tool – Rigid Tapping Function, LNS Turbo Swarf Conveyor & Iemca Boss 332 e/R  Automatic Bar Feeder. S/No. V54259 (08/2012)

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Citizen Series 2 L20-VIII LFV CNC Sliding Headstock CNC Turning Centre, Model L20E 2M8 with CINCOM System M70LPC-VU Control, Oversize 25mm Bar Capacity, Max Machining Length 200mm, Featuring Low Frequency Vibration Technology: LFV Creates the advantage of aiding the production of small chips by finely fragmenting the swarf generated and eliminating the possibility of in-cut interference from stringy materials and especially when ‘ birds-nesting’ is occurring. LFV Technology also enables an increase in depth-of-cut and can improve surface quality even on very small diameters or very thin-walled components, Switchable between Guide Bush mode or Non-guide Bush mode, Main Spindle Collet Sleeve dia 25mm, Max 10000rpm, motor 2.2/3.7 kW, Sub Spindle Collet Sleeve dia 25mm, Max 10000rpm, Motor 0.75/2.2 kW, 5 Gang Turning Tools,  4 Rotary Tools, + 3 Single Ended Spindles Manually Adjustable from 0 to 90 Degrees, Back Tool Post  4 Fixed tools, 3 Fixed Tools on the Opposite Tool Post, Parts Catcher, Parts Conveyor, Part Off Tool Breakage Detection – Probe Type, Cutting oil Level Detection, Coolblaster High Pressure Coolant System, Absolent A Mist 10 Fume Extractor, Nobel 250ME Fire Suppression System, Special NC Functions: User Macro, Synch Rotation of Main and Sub Spindle, Canned Cycle for Drilling, Tool Nose Radius Compensation Function, Main Spindle 1 Degree Indexing, Sub Spindle 1 Degree Indexing, Network I/O Function, Main Spindle C Axis Control, Sub Spindle C Axis Control, Geometric Function, Constant Surface Speed Control for Main and Sub Spindles, Multi Repetitive Cycle, B Code Function, Corner Chamfer and Radius, Spindle Speed Fluctuation Detection, Milling Interpolation, Synchronous Tapping Function, Continuous Threading Cycle, Helical Compensation Function, Sub Spindle Threading Function, Rigid Tapping Function to Main and Sub Spindles, Rotary Tool – Rigid Tapping Function,  Offset – 80 Sets, Cromar Type A Swarf Conveyor & Iemca Boss 338-32 HD Superfast Combo Automatic Bar Feeder. S/No. QF6174 (10/2017 - Installed 03/2018)

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Citizen L20-VIII 8-Axis Sliding Headstock CNC Turning Centre, Model 7M8 Type L7 20 with CINCOM (Mitsubishi Meldas 700LC) Control, 20mm Bar Capacity, Max Machining Length 200mm, Main Spindle Max 10000rpm, Motor 2.2/3.7 kW, Sub Spindle Max 8000rpm, Motor 0.75/2.2 kW, GSE1307 Double Ended 3 Position Face Driven Spindle Unit. 5 Gang Turning Tools, 4 Rotary Tools, Back Tool Post  3 Fixed Tools, 3 Fixed Tools on the opposite Tool Post, Ejecting Jig for Through Hole Workpiece, U550B, Parts Catcher, Parts Conveyor, Part off Tool Breakage Detection – Probe Type, Cutting Oil Level Detection, Filtermist Extractor, Automatic Fire Extinguisher  (Dupont 134 Gas), Special NC Functions: User Macro, Synch Rotation of Main and Sub Spindle, Canned Cycle for Drilling, Single Point Threading for Sub Spindle, Sub Spindle 1 Degree Indexing, Main Spindle C Axis Control, Iemca Boss 332 E/R 37L Automatic Bar Feeder. S/No. E4031 (2006)

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Citizen L20-VIII 8-Axis Sliding Headstock CNC Turning Centre, Model L5 20 with CINCOM Control, 20mm Bar Capacity, Max Machining Length 200mm, Main Spindle Max 10000 rpm, Motor 2.2/3.7 kW, Sub Spindle Max 8000rpm, Motor 0.75/2.2 kW, GSE1007 Double Ended Face Driven Spindle Unit, 6 Gang Turning Tools, 4 Rotary Tools, Back Tool Post 3 Fixed Tools, 3 Fixed Tools on the Opposite Tool Post, Ejecting Jig for Through Hole Workpiece, Long Parts Adaptor, Parts Conveyor, Part Off Tool Breakage Detection – Probe Type, Cutting Oil Level detection, Filtermist  Extractor, Automatic Fire Extinguisher (Dupont 134 Gas), Special NC Functions: User Macro, Synch Rotation of Main and Sub Spindle, Canned Cycle for Drilling, Single Point Threading for Sub Spindle, Sub Spindle 1 Degree Indexing, Main Spindle C Axis Control, Sub Spindle C Axis Control, LNS Hydrobar Express 332 Automatic Bar Feeder. S/No. E3920 (2004)

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Citizen Series 3 M32-III 13-Axis CNC Sliding Headstock Turning Centre, Model M32-111 with CINCOM Control, 32mm Bar Capacity, Max Machining Length 320mm, Main Spindle Max 8000rpm, Motor 3.7/5.5 kW, Sub Spindle Max 7000rpm, Motor 1.5/2.2 kW, 5 Gang Turning Tools,  4 Rotary Tools, Back Tool Post 3 Fixed Tools, Parts Conveyor, Parts Catcher, Absolent ODF 1000S Fume Extractor, Coolblaster 4 Line Programmable High Pressure Coolant, Part Off Tool Breakage Detection – Electronic Type, Cutting Oil Level Detection, Automatic Fire Extinguisher (Dupont 134 Gas), Special NC Functions: User Macro, Synch Rotation of Main and Sub Spindle, Canned Cycle for Drilling, Rigid Tapping Main Spindle, Rigid Tapping Sub Spindle S1, Rigid Tapping for Rotary Tools S3 and S4, Single Point Threading for Sub Spindle, Sub Spindle 1 Degree Indexing, Main Spindle C Axis Control, Sub Spindle C Axis Control, Constant Surface Speed Control for Sub Spindle, Milling Interpolation, LNS Turbo Swarf Conveyor & Iemca Boss 332 E/R Type 337LL Automatic Bar Feeder. S/No. P14387 (2005)

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Citizen Series 3 M32-III 13-Axis CNC Sliding Headstock Turning Centre, Model M32-111 with CINCOM Control, 32mm Bar Capacity, Max Machining Length 320mm, Main Spindle Max 8000rpm, Motor 3.7/5.5 kW, Sub Spindle Max 7000rpm, Motor 1.5/2.2 kW, 5 Gang Turning Tools, 4 Rotary Tools, Back Tool Post 3 Fixed Tools, Parts Conveyor, Parts Catcher, Absolent ODF 1000S Fume Extractor, Coolblaster 4 Line Programmable High Pressure Coolant, Part Off Tool Breakage Detection – Electronic Type, Cutting Oil Level Detection, Automatic Fire Extinguisher (Dupont 134 Gas), Special NC Functions: User Macro, Synch Rotation of Main and Sub Spindle, Canned Cycle for Drilling, Rigid Tapping Main Spindle, Rigid Tapping Sub Spindle S1, Rigid Tapping for Rotary Tools S3 and S4, Single Point Threading for Sub Spindle, Sub Spindle 1 Degree Indexing, Main Spindle C Axis Control, Sub Spindle C Axis Control (Added in 2005) Constant Surface Speed Control for Sub Spindle, Milling Interpolation, LNS Hydrobar Express 332 S2 Automatic Bar Feeder. S/No. P14102 (2003)

Please Note: This lot is located in Buckinghamshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.