DMG Mori Seiki NHX4000 Twin Pallet Horizontal Machining Centre with Siemens 840D Slimline 3D CNC Control, Pallet Size: 400 x 400mm, X Traverse: 560mm, Y Traverse: 560mm, Z Traverse: 660mm, B Axis 360,000 Degrees, Spindle Speeds: 0 – 12,000rpm, Spindle Taper: SK40, Flood Coolant, Rigid Tapping, Swarf Conveyor, Swarf Management System, Spindle Motor 15/11kw, Electrics 415v, 3ph, 50 Cycles, Approximate Dimensions 2700 x 4200 x 2750mm, Approximate Weight 7600kg. S/No.1220 000057-3  2813243 (2012)

Please Note: Fixtures are not included

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Mazak FH5800 Horizontal Machining Centre with Mazatrol 640M Fusion Control , 1 degree increment B-Axis, 120-Station ATC, Renishaw Measuring Probe, Renishaw Spindle Probe, Camera and Screen, Qty of Tool Holders, (2) Tombstones. S/No. 155849 (2001)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Mori Seiki Hitech HS500 CNC Twin Pallet Horizontal Machining Centre with Seicos e16m Fanuc 16 Control, Full B-Axis, Pallet Size: 500 x 500mm, Travels: 680 x 680 x 680mm, 120-Station ATC, BT40, 12,000rpm, 22/25kw, Qty BT40 Toolholders, Spare Pallets & Tombstones. S/No. HS50306 (2001)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

YCM Supermax V158B Machining Centre with Heidenhain TNC 410 Control, Table Size: 1700mm x 860mm, 24-Station ATC, Spindle Speed: 6,000rpm, Travel X = 1500mm, Y = 860mm, Z = 720mm.  Measurements; 4.5m Length, 3.2m High and 3.5m Width. S/No. 3010 96 (2003)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

HAAS VF3SS 5-Axis Vertical Machining Centre with Nikken Trunnion 5th Axis, Through Spindle Coolant, In Line Direct Drive Spindle, Spindle & Toolsetting Probes, 40-Station ATC, BT40, Table Size: 1219 x 457mm, Travels: 1016 x 508 x 635mm. S/No. 1072660 (2009)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Mazak VCN410A-II Vertical Machining Centre with Mazak Matrix Nexus Control, Table Size: 900 x 410mm, Travels: 560 x 410 x 510mm, 12,000rpm, 30-Station ATC, CAT40, Table Probe, Swarf Conveyor. S/No. 207383 (2008)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Supermax YCM FV56A APC Twin Pallet Vertical Machining Centre with Heidenhain 530i Control, Pallet Size: 560 x 410mm, Movement: 560 x 410 x 450mm, Rapid: 36 m/min, Spindle Speed: 40-10,000 Rpm, Spindle Power: 7.5 kW, BT40 Spindle, 20-Position ATC, Swarf conveyor. S/No. 0666 (2005)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Bridgeport VMC600P3 Vertical Machining Centre with Heidenhain TNC530i Control, Table Size: 750 x 510mm, Travels: 610 x 510 x 510mm, 8000rpm, 20-Station ATC, BT40. S/No. NVAA6D0058 (2006)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Cincinnati Arrow-2 750 Vertical Machining Centre with Heidenhain 530I Control, Table Size: 950 x 520mm, X-Axis Travel: 760mm, Y-Axis Travel: 510mm, Z-Axis Travel: 510mm, Spindle nose to Table: 125 – 630mm, Table load capacity: 1,650 Lbs, Spindle Motor: 17 / 12 HP, Spindle Speed: 12,000rpm, Spindle Taper: CAT 40, Cutting Feed Rate: 590 IPM, Rapid Traverse Rate: 1180 IPM, 21-Station Toolchanger, Linear Scales, Remote Pulse Handle, Max. Tool Weight: 15 Lbs, Max. Tool Length: 15″, Coolant system. S/No. 7043-HoA-KE1815 (2003)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Matchmaker 610 Mini Mill Vertical Machining Centre with Fanuc Oi-Mate MC Control, Table to Spindle: 150 – 630mm, Table Size: 700 x 308mm, Traverses XYZ: 610 x 305 x 460mm, Rapid Feed Rates XYZ: 20 x 20 x 18 m/minute, Spindle Power: 7.5kW, Spindle Speed: 8000rpm, 16-Station ATC, BT40. S/No. 61000938 (2007)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

HAAS Mini Mill Vertical Machining Centre with HAAS Control, Travels X,Y,Z: 406 x 305 x 254mm, Table Size: 660 x 305mm, BT40 Spindle Taper, 7.5kw Motor, 6,000rpm Spindle Speed, 10-Station ATC, Coolant. S/No. PM6042 (2006)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Okamoto 52 EX, Model ACC-52EX CNC Surface Grinder with Okamoto Precision Control, Electric Magnetic Chuck: 500mm x 200mm, Table Size: 750mm x 200mm. S/No. 72039 (1999)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Doosan Puma 2600Y CNC Lathe with Fanuc i Series Control, C & Y Axis, 3 Driven Holders, Static Holders, 200mm Chuck, Parts Catcher, Toolsetter, 12-Station Turret, (24 positions), Tailstock, Swarf Conveyor, Max Turning Dia: 376mm, Max Turning Length: 520mm, Barfeed Capacity: 76mm, 22/26kw. S/No. ML0105-000385 (2012)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Hurco TM6i CNC Lathe, Swing over Bed: 405mm, Swing over Cross Slide: 240mm, Max Turning dia: 316mm, Max Turning Length: 340mm, Spindle Bore: 56mm, Bar Capacity: 45mm dia, 6,000rpm, Power Chuck, Toolsetter, Parts Catcher, 12-Station Turret with 6 Holders, 2 Turning Toolholders & Bushes, Swarf Conveyor, Manuals. S/No. H-76H0306 (2018)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Hardinge Quest 8 51 CNC Driven Tool Sub-Spindle CNC Lathe with Fanuc 16i-T Control, Driven Tooling, Sub-spindle, 3 Driven Tool Holders, 8 static, Multifeed Short Magazine Bar Feeder, Collet Chuck, 18 Off C 16 Collets, Swarf Conveyor, Tool Setting Probe, Parts Catcher, Machine Manuals. S/No. QC-671 (2005)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Hardinge Model ML, Elite 8/51 CNC Driven Tool Lathe with GE Fanuc 21i-TB Control, 200mm 3-Jaw Hydraulic Chuck, C16 Collet System and Collets, 5,000rpm, 11kw Spindle Power, 518mm Wwing, 340mm Turning dia, 355mm Max Turning Length, 51mm Bar Capacity, C-Axis: 360,000 Position, 12-Station Turret, 5000 rpm Milling Head, Tailstock, Parts Catcher, Tooling. S/No. ML-000222 (2003)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Tongtai TA20LMB CNC Lathe with Fanuc 18iTB Control, Sub Spindle, Driven Tooling, Short Magazine Barfeed, Collet Chucks Main & Sub Spindle, 3 Driven Tool Holders, Toolsetter, 12-Station Turret, Swarf Conveyor, Parts Catcher & Conveyor, Max Turning Dia: 335mm, Max Workpiece Length: 650mm, Bar Capacity: 51mm. S/No. U20195 (2012)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Colchester Tornado T8 CNC Lathe with Fanuc 21iT Control, Short Magazine Barfeed, Toolsetter, Multibore Collet Chuck, 12-Station VDI40 Turret, Parts Catcher, Swarf Conveyor, 260mm Turn dia x 540mm Turn Length, Bar Capacity: 65mm, 3500rpm, 22kw. S/No. R40020 (2005)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Colchester Combi K4 CNC Lathe with Fanuc 210iT Control, 315mm Chuck, 8-Station VDI Turret, 1,800 rpm, Swing over Bed: 554mm, Swing over Cross Slide: 370mm, Distance between Centres: 1016mm, X-Axis Cross Slide Travel: 290mm, Spindle Nose (Camlock) D1-11, Spindle Bore: 102mm, Spindle Motor: 18.5/22kw. S/No. C50046 (2004)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

HAAS TL-2 CNC Lathe, Swing over Apron: 406mm, Swing over Cross Slide: 282mm, Distance between Centres: 1219mm, 2000 rpm, Spindle Motor: 9 Kw, Spindle Nose: A2-6, Spindle Bore: 76mm, 3-Jaw Chuck, QCTP. S/No. 3081028 (2008)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

MHP 65/500 Series 11 CNC Lathe with Fanuc 21iT Control, 10″ Chuck, 12-Station Duplomatic Turret, Tailstock, Swarf Conveyor, Max Turning dia: 300mm, 500mm Turning Length, 65mm Bar Capacity, 22/18.5kw

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

Hydrafeed Multiservo 3-80 Barfeed, Capacities: 1½ metre bars, 3-80mm dia. S/No. 6253 (2012)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser

LNS Alpha SL65-S Barfeed. S/No. 29058301 (2015)

Please Note: This item is located in West Sussex and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser