Creusen K-9000 Pedestal

This is New Machine - The recommended list price for this item is £346.32

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen K-9000 Pedestal

This is New Machine - The recommended list price for this item is £346.32

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen K-9000 Pedestal

This is New Machine - The recommended list price for this item is £346.32

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen K-9000 Pedestal

This is New Machine - The recommended list price for this item is £346.32

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen BS-975HD Single Phase Belt Linisher, 230V, 3kw, Speed: 2800 - 3400rpm, Belt Size: 2000 x 75mm

This is New Machine - The recommended list price for this item is £1298.70

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen BS-9150HD 3-Phase Belt Linisher, 400/230V, 4kw, Speed: 2800 - 3400rpm, Belt Size: 2000 x 150mm

This is New Machine - the recommended list price for this item is £1298.70

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple MD-360 1000 Digi Centre Lathe with D.R.O, Coolant System, 200mm 3 & 4-Jaw Chucks, 300mm Face Plate, Fixed & Travelling Steadies, 4-Way Toolholder, 1000mm Centre Width, 180mm Centre Height, 280mm Swing in Gap, 51mm Spindle Hole, MK5 Spindle Taper, MK3 Tailstock Taper, Speeds: 45 - 1,800rpm, 95mm Top Slide Travel, 180mm Compound Slide Travel

This is New Machine - The recommended list price for this item is £6,620

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple TU-2807 Vario Stepless Lathe, 290mm Turning Diameter over Machine Bed, 175mm Turning Diameter over Compound Sleds, 700mm Centre Width, 145mm Centre Height, 180mm Bed Width, 26mm Spindle Bore, MK4 Spindle Taper, 125mm 3-Jaw Chuck, Spindle speeds: 150 - 2,000rpm, 60mm Top Slide Travel, 145mm Compound Slide Travel

This is New Machine - The recommended list price for this item is £2,495

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple E-MKS-315SA Semi Automatic Circular Saw with 2-Step Motor, Blade Size: 315mm, Saw Blade Hole: 32mm, 45 degree Head Rotation, Speed: 45/90min, Cutting Ranges - 0deg Circular: 105mm, 0deg Square: 85 x 85mm, 0deg Rectangular: 90 x 60mm

This is New Machine - The recommended list price for this item is £4,175

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple BS-275G Bandsaw with 2-Speed Motor, Mitre Swivelling Saw Bow, Auto Limit Stop, Material Dead Stop, Cooling Liquid Tank & Coolank System, Quick Release Chuck Vice, Circular Cutting Capacity: 225mm, Rectangular Cutting Capacity: 245 x 180mm, Mitre Cut at 45° - Circular: 225mm, Rectangular: 160 x 160mm, Mitre Cut at 60° - Circular: 100mm, Rectangular: 100 x 100mm, Cutting Speed: 45/90 m/min, Saw Band Length: 2.480 x 27 x 0.9mm, Inlet Height: 910mm

This is New Machine - The recommended list price for this item is £1,755

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £40 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto a flat vehicle. No base / pallet  

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple BS-275G Bandsaw with 2-Speed Motor, Mitre Swivelling Saw Bow, Auto Limit Stop, Material Dead Stop, Cooling Liquid Tank & Coolank System, Quick Release Chuck Vice, Circular Cutting Capacity: 225mm, Rectangular Cutting Capacity: 245 x 180mm, Mitre Cut at 45° - Circular: 225mm, Rectangular: 160 x 160mm, Mitre Cut at 60° - Circular: 100mm, Rectangular: 100 x 100mm, Cutting Speed: 45/90 m/min, Saw Band Length: 2.480 x 27 x 0.9mm, Inlet Height: 910mm

This is New Machine - The recommended list price for this item is £1,755

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £40 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto a flat vehicle. No base / pallet

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple BS-210G Bandsaw with 2-Speed Motor, Mitre Swivelling Saw Bow, Auto Limit Stop, Material Dead Stop, Cooling Liquid Tank & Coolank System, Quick Release Chuck Vice, Circular Cutting Capacity: 180mm, Rectangular Cutting Capacity: 200 x 150mm, Mitre: 45/60°, Mitre Cut Circular: 115/70mm, Rectangular: 125 x 110mm, Cutting Speed: 30/80 m/min, Saw Band Length: 2.085 x 20 x 0.9mm, Inlet Height: 920mm

This is New Machine - The recommended list price for this item is £1,720

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine crated

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple BS-125GS Bandsaw, Circular Cutting Range: 120mm, Rectangular Cutting Range: 130 x 125mm, Mitre: 45/60°, Cutting Speed: 30 - 80m/min, Saw Band Length: 1.440 x 13 x 0.65mm

This is New Machine - The recommended list price for this item is £480

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple FM-50 S Digi Precise Milling & Drilling Machine with 3-Axis D.R.O, 180° Head Rotation, 2-Speed Motor, Swivel Cross Table 45° left to right, Drilling Capacities - Cast Iron: 50mm, Steel: 35mm, Face Mill Capacity: 100mm, End Mill Capacity: 32mm, M16 Threading in Steel, 340mm Distance Spindle to Table, 90° Head Movement, ISO 40 Spindle Taper, 8-Spindle Speeds: 115 - 1750rpm, Sleeve Travel: 120mm, Height Adjustment Cross Table: 350mm, Table Size: 800 x 240mm, X = 360mm, Y = 210mm, Z = 340mm, T-Slot Size: 12mm

This is New Machine - The recommended list price for this item is £6,485

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple BFM 35 Vario Mill Drill with Stand, Digital LED Speed Display, Steel Drilling Capacity: 32mm, Cutter Head Milling Capacity: 80mm, End Mill Cutter Capacity: 20mm, Working Range: 220mm, 90° Head Rotation, MK3 Spindle Taper, Variable Speed Motor, Spindle Speeds: 50 - 2250rpm, Sleeve Travel: 75mm, Table Size: 700 x 210mm, Travels - X-Axis: 425mm, Y-Axis: 220mm, Z-Axis: 370mm, (2) 14mm T-Slots

This is New Machine - The recommended list price for this item is £2,700

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple BFM 16 Vario Mill Drill with Stand, Steel Drilling Capacity: 16mm, Cutter Head Milling Capacity: 52mm, End Mill Cutter Capacity: 16mm, Working Range: 175mm, 90° Head Rotation, MK2 Spindle Taper, Variable Speed Motor, Spindle Speeds: 50 - 2500rpm, Sleeve Travel: 50mm, Table Size: 400 x 120mm, Travels - X-Axis: 220mm, Y-Axis: 150mm, Z-Axis: 270mm, (3) 10mm T-Slots

This is New Machine - The recommended list price for this item is £1,085

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple SB-40S Variable Speed Pedestal Drill, Steel Drilling Capacity: 40mm, Sleeve Travel: 120mm, MT4 Spindle Taper, Spindle Speeds: 150 - 1920mm, Working Range: 215mm, Table Size: 410 x 315mm, (2) 16mm T-Slots, 45° Swivel Drilling Table, 100mm Column Diameter

This is New Machine - The recommended list price for this item is £1,875

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple SBS-23 Pedestal Drill, 400V, Steel Drilling Capacity: 23mm, Sleeve Travel: 80mm, MT2 Spindle Taper, Spindle Speeds: 120 - 2580rpm, 180mm Working Range, Table Size: 290 x 290mm, 16mm T-Slot, 45° Drilling Table Swivel, 80mm Column Diameter

This is New Machine - The recommended list price for this item is £465

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple SBS-23 Pedestal Drill, 400V, Steel Drilling Capacity: 23mm, Sleeve Travel: 80mm, MT2 Spindle Taper, Spindle Speeds: 120 - 2580rpm, 180mm Working Range, Table Size: 290 x 290mm, 16mm T-Slot, 45° Drilling Table Swivel, 80mm Column Diameter

This is New Machine - The recommended list price for this item is £465

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item. 

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple SBS-23 Pedestal Drill, 400V, Steel Drilling Capacity: 23mm, Sleeve Travel: 80mm, MT2 Spindle Taper, Spindle Speeds: 120 - 2580rpm, 180mm Working Range, Table Size: 290 x 290mm, 16mm T-Slot, 45° Drilling Table Swivel, 80mm Column Diameter

This is New Machine - The recommended list price for this item is £465

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item. 

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple TB-23 Bench Drill, 230V,Steel Drilling Capacity: 23mm, Sleeve Travel: 80mm, MT2 Spindle Taper, Spindle Speeds: 120 - 2580rpm, Working Range: 180mm, Table Size: 290 x 290mm, 16mm T-Slot, 45° Drilling Table Swivel, 80mm Column Diameter

This is New Machine - The recommended list price for this item is £425

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple TB-23 Bench Drill, 230V,Steel Drilling Capacity: 23mm, Sleeve Travel: 80mm, MT2 Spindle Taper, Spindle Speeds: 120 - 2580rpm, Working Range: 180mm, Table Size: 290 x 290mm, 16mm T-Slot, 45° Drilling Table Swivel, 80mm Column Diameter

This is New Machine - The recommended list price for this item is £425

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple BSM-150 Linisher, Belt Size: 150 x 2000mm, Contact Wheel: 250 x 150mm, Belt Speed: 37m/sec, Grinding Rest: 150mm continuous, 400V

This is New Machine - The recommended list price for this item is £937

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine crated.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple BSM-150 Linisher, Belt Size: 150 x 2000mm, Contact Wheel: 250 x 150mm, Belt Speed: 37m/sec, Grinding Rest: 150mm continuous, 400V

This is New Machine - The recommended list price for this item is £937

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine crated

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple BSM-75 2-Speed Linisher, Belt Size: 75 x 2000mm, Contact Wheel: 200 x 75mm, Belt Speed: 18m/sec ...37m/sec, Grinding Rest: 75mm continuous, 400V

This is New Machine - The recommended list price for this item is £851

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto a flat vehicle. No base / pallet 

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple DS-175 Double Ended Grinder, Grinding Disk Dimensions: 175 x 20 x 32mm, Speed: 2850/min, Motor Power: 230V/600 Watt

This is New Machine - The recommended list price for this item is £118.73

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £10 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple DS-175 Double Ended Grinder, Grinding Disk Dimensions: 175 x 20 x 32mm, Speed: 2850/min, Motor Power: 230V/600 Watt

This is New Machine - The recommended list price for this item is £118.73

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £10 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple DS-175 Double Ended Grinder, Grinding Disk Dimensions: 175 x 20 x 32mm, Speed: 2850/min, Motor Power: 230V/600 Watt

This is New Machine - The recommended list price for this item is £118.73

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £10 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple DS-175 Double Ended Grinder, Grinding Disk Dimensions: 175 x 20 x 32mm, Speed: 2850/min, Motor Power: 230V/600 Watt

This is New Machine - The recommended list price for this item is £118.73

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £10 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple DS-150 Double Ended Grinder, Grinding Disk Dimensions: 150 x 20 x 16mm, Speed: 2850/min, Motor Power: 230V/600 Watt

This is New Machine - The recommended list price for this item is £111.84

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £10 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple DS-150 Double Ended Grinder, Grinding Disk Dimensions: 150 x 20 x 16mm, Speed: 2850/min, Motor Power: 230V/600 Watt

This is New Machine - The recommended list price for this item is £111.84

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £10 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple DS-150 Double Ended Grinder, Grinding Disk Dimensions: 150 x 20 x 16mm, Speed: 2850/min, Motor Power: 230V/600 Watt

This is New Machine - The recommended list price for this item is £111.84

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £10 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Epple PW-10M Profile Roller Machine, Axis Diameter: 30mm, Roller Diameter: 100mm

This is New Machine - The recommended list price for this item is £946.37

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto a flat vehicle, no base / pallet.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate G27-55M Universal Grinder with Internal Grinding. S/No. 96G27S1222 (2007)

This is a Used Machine

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto a flat vehicle, no base / pallet.

Unfortunatly there is no warranty with this machine.

Gate PBM-2000 Turret Milling Machine with D.R.O, Working Surface: 1067 x 230mm, Manual Travels: 736 x 305 x 406mm, Auto Travels: 660 x 305 x 406mm, R8 Spindle Nose, Spindle Speeds: 60 - 4,200rpm, 3HP Motor, Spindle Nose to Table: 65/47mm (min/max), Spindle Centre to Column: 100/470mm, Overarm Travel: 370mm, Quill Travel: 127mm. S/No. 20070866S (08/2007)

This is a Used Machine

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto a flat vehicle, no base / pallet.

Unfortunatly there is no warranty with this machine.

Gate PBM-2000 Turret Milling Machine with D.R.O, Working Surface: 1067 x 230mm, Manual Travels: 736 x 305 x 406mm, Auto Travels: 660 x 305 x 406mm, R8 Spindle Nose, Spindle Speeds: 60 - 4,200rpm, 3HP Motor, Spindle Nose to Table: 65/47mm (min/max), Spindle Centre to Column: 100/470mm, Overarm Travel: 370mm, Quill Travel: 127mm. S/No. 20070865S (08/2007)

This is a Used Machine

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto a flat vehicle, no base / pallet.

Unfortunatly there is no warranty with this machine.

Gate PBM-2000 Turret Milling Machine with D.R.O, Working Surface: 1067 x 230mm, Manual Travels: 736 x 305 x 406mm, Auto Travels: 660 x 305 x 406mm, R8 Spindle Nose, Spindle Speeds: 60 - 4,200rpm, 3HP Motor, Spindle Nose to Table: 65/47mm (min/max), Spindle Centre to Column: 100/470mm, Overarm Travel: 370mm, Quill Travel: 127mm. S/No. 20070863S (08/2007)

This is a Used Machine

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto a flat vehicle, no base / pallet.

Unfortunately there is no warranty with this machine.

Gate PBM-2000 Turret Milling Machine with D.R.O, Working Surface: 1067 x 230mm, Manual Travels: 736 x 305 x 406mm, Auto Travels: 660 x 305 x 406mm, R8 Spindle Nose, Spindle Speeds: 60 - 4,200rpm, 3HP Motor, Spindle Nose to Table: 65/47mm (min/max), Spindle Centre to Column: 100/470mm, Overarm Travel: 370mm, Quill Travel: 127mm. S/No. 20070864S (08/2007)

This is a Used Machine

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto a flat vehicle, no base / pallet.

Unfortunately there is no warranty with this machine.

Gate PBM-SUPER Turret Milling Machine with D.R.O, Variable Speed Head, ISO-40 Taper, 5HP Motore, Gear type X Axis Power feed, Power Rise & Fall, Interlocked Spindle Guard, Coolant Equipment, Working Surface: 1372 x 300mm, Manual Travels: 862 x 400 x 406mm, Auto Travels: 787 x 400 x 406mm, Spindle Speeds: 60 - 3,600rpm, Spindle Nose to Table: 30 - 520mm, Overarm Travel: 500mm, Quill Travel: 127mm

This is a Used Machine

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto a flat vehicle, no base / pallet.

Unfortunately there is no warranty with this machine.

Bridgeport Turret Mill

This is a Used Machine - Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto a flat vehicle, no base / pallet.

Unfortunately there is no warranty with this machine.

Gate Profitdrill PD-1B Bench Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 420mm, Spindle Base: 650mm, 1/2 HP Motor

This is an Ex Demonstration Machine - The recommended list price for this item is £700

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item.

Unfortunately there is no warranty with this machine.

Gate Profitdrill PD-1B Bench Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 420mm, Spindle Base: 650mm, 1/2 HP Motor

This is an Ex Demonstration Machine - The recommended list price for this item is £700

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item.

Unfortunately there is no warranty with this machine.

Gate G-330E High Speed Precision Centre Lathe with D.R.O, 330mm Swing over Bed, 195mm Swing over Cross slide, 1000mm between Centres, 190mm Bed Width, 490mm Swing over Gap, Spindle Speeds: 80 - 2,000rpm, 40mm Spindle Bore, MT5 Spindle Taper, MT3 Tailstock Taper, Tailstock Quill Travel: 110mm, Cross Slide Travel: 175mm, Compound Rest Travel: 100mm. S/No. 9611425 (11/2007)

This is a Used Machine

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet

Unfortunately there is no warranty with this machine.

Gate G-330E High Speed Precision Centre Lathe with D.R.O, 330mm Swing over Bed, 195mm Swing over Cross slide, 1000mm between Centres, 190mm Bed Width, 490mm Swing over Gap, Spindle Speeds: 80 - 2,000rpm, 40mm Spindle Bore, MT5 Spindle Taper, MT3 Tailstock Taper, Tailstock Quill Travel: 110mm, Cross Slide Travel: 175mm, Compound Rest Travel: 100mm. S/No. 9611433 (11/2007)

This is a Used Machine

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet

Unfortunately there is no warranty with this machine.

Gate G-330E High Speed Precision Centre Lathe with D.R.O, 330mm Swing over Bed, 195mm Swing over Cross slide, 1000mm between Centres, 190mm Bed Width, 490mm Swing over Gap, Spindle Speeds: 80 - 2,000rpm, 40mm Spindle Bore, MT5 Spindle Taper, MT3 Tailstock Taper, Tailstock Quill Travel: 110mm, Cross Slide Travel: 175mm, Compound Rest Travel: 100mm.

This is a Used Machine

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet

Unfortunately there is no warranty with this machine.

Gate G-330E High Speed Precision Centre Lathe with D.R.O, 330mm Swing over Bed, 195mm Swing over Cross slide, 1000mm between Centres, 190mm Bed Width, 490mm Swing over Gap, Spindle Speeds: 80 - 2,000rpm, 40mm Spindle Bore, MT5 Spindle Taper, MT3 Tailstock Taper, Tailstock Quill Travel: 110mm, Cross Slide Travel: 175mm, Compound Rest Travel: 100mm.

This is a Used Machine

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet

Unfortunately there is no warranty with this machine.

TFY Turret Mill with D.R.O

This is a Used Machine

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet

Unfortunately there is no warranty with this machine.

Creusen DS9250 Grinder with Stand & Water Cup

This is a Used Machine

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet

Unfortunately there is no warranty with this machine.

Epple MFS-150 Multi Functional Grinder, Blade Size: 2950rpm, 230V Motor

This is an Ex Demonstration Machine - The recommended list price for this item is £80

Please Note: This Item is located in Watford, UK

Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.

Unfortunately there is no warranty with this machine. 

Epple DS-150 Double Ended Grinder, Grinding Disk Dimensions: 150 x 20 x 16mm, Speed: 2850min, 230V

This is an Ex Demonstration Machine - The recommended list price for this item is £55

Please Note: This Item is located in Watford, UK

Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.

Unfortunately there is no warranty with this machine.

Epple DS-200 Double Ended Grinder, Grinding Disk Dimensions: 200 x 25 x 32mm, Speed: 2850min, 400V

This is an Ex Demonstration Machine - The recommended list price for this item is £115

Please Note: This Item is located in Watford, UK

Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.

Unfortunately there is no warranty with this machine.

Epple BS-100G Bandsaw, Cutting Ranges: 90° Round: 100mm, 90° Rectangular: 100 x 150mm, 45° Rectangular: 100 x 60mm, Swivel: 45 - 90°, Blade Dimensions: 1470 x 0.65 x 13mm, 230V

This is an Ex Demonstration Machine - The recommended list price for this item is £145

Please Note: This Item is located in Watford, UK

Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.

Unfortunately there is no warranty with this machine.

Epple TBH 24 Bench Drill

This Item has been repaired due to damage in Transit - sold as is
This is an Ex Demonstration Machine - The recommended list price for this item is £875

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet

With the purchase of this machine you would be entitled to 3 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Vertex 150mm K-Type Milling Vice with Swivel Base

This is a New Item - The recommended list price for this item is £159

Please Note: This Item is located in Watford, UK

Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.

With the purchase of this machine you would be entitled to 12 months warranty, against manufacturing defects.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Vertex 150mm K-Type Milling Vice with Swivel Base

This is a New Item  - The recommended list price for this item is £159

Please Note: This Item is located in Watford, UK

Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.

With the purchase of this machine you would be entitled to 12 months warranty, against manufacturing defects.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Vertex 150mm K-Type Milling Vice with Swivel Base

This is a New Item  - The recommended list price for this item is £159

Please Note: This Item is located in Watford, UK

Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.

With the purchase of this machine you would be entitled to 12 months warranty, against manufacturing defects.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Vertex 150mm K-Type Milling Vice with Swivel Base

This is a New Item  - The recommended list price for this item is £159

Please Note: This Item is located in Watford, UK

Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.

With the purchase of this machine you would be entitled to 12 months warranty, against manufacturing defects.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Vertex 150mm K-Type Milling Vice with Swivel Base

This is a New Item  - The recommended list price for this item is £159

Please Note: This Item is located in Watford, UK

Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.

With the purchase of this machine you would be entitled to 12 months warranty, against manufacturing defects.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Vertex 150mm K-Type Milling Vice with Swivel Base

This is a New Item - The recommended list price for this item is £159

Please Note: This Item is located in Watford, UK

Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.

With the purchase of this machine you would be entitled to 12 months warranty, against manufacturing defects.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Vertex 200mm K-Type Milling Vice with Swivel Base

This is a New Item - The recommended list price for this item is £279

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £15 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 12 months warranty, against manufacturing defects.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.