Gate Eziturn EZT-320 CNC Programmable Lathe, with 6" Bison 3-Jaw Chuck, Electric 4-Way Toolpost, 320mm Swing over Bed, 180mm Swing over Cross slide, 500mm between Centres, 190mm Bed Width, Spindle Speeds: 3,000rpm, 40mm Spindle Bore, Longitudinal Working: 500mm, X Axis: 240mm,Tailstock Diameter: 40mm, MT-3 Tailstock Taper

This is New Machine - The recommended list price for this item is £20,290

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto a flat vehicle, no base / pallet.

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only. 

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Educator EDU-3M 3-Axis CNC Engraving & Milling Machine

This is New Machine - The recommended list price for this item is £16,520

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto a flat vehicle, no base / pallet.

With the purchase of this machine you would be entitled to 6 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate G-390C Heavy Duty Centre Lathe with Fagor 20iT D.R.O, Multifix Toolpost, 190mm Centre Height, 387mm Swing over Bed, 238mm Swing over Cross slide, Distance between Centres: 1250mm, 280mm Bed Width, 610mm Swing over Gap, D-6 Spindle Nose, 56mm Spindle Bore, MT6 Taper

This is New Machine - The recommended list price for this item is £24,670

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with a forklift onto a lorry, Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate G-340C Heavy Duty Centre Lathe with Fagor 20iT D.R.O, Multifix Toolpost, 170mm Centre Height, 340mm Swing over Bed, 210mm Swing over Cross slide, Distance between Centres: 1100mm, 230mm Bed Width, 512mm Swing over Gap, D-4 Spindle Nose, 40mm Spindle Bore, MT5 Taper

This is New Machine - The recommended list price for this item is £17,145

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with a forklift onto a lorry, Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate G-340C Heavy Duty Centre Lathe with Fagor 20iT D.R.O, Multifix Toolpost, 170mm Centre Height, 340mm Swing over Bed, 210mm Swing over Cross slide, Distance between Centres: 760mm, 230mm Bed Width, 512mm Swing over Gap, D-4 Spindle Nose, 40mm Spindle Bore, MT5 Taper

This is New Machine - The recommended list price for this item is £16,560

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with a forklift onto a lorry, Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate G-330ES High Speed Precision Centre Lathe with Fagor 20iT D.R.O, Bison Chuck & Multifix Toolpost, 330mm Swing over Bed, 195mm Swing over Cross slide, 600mm between Centres, 190mm Bed Width, Spindle Speeds: 80 - 2,000rpm, 40mm Spindle Bore, MT5 Spindle Taper, MT3 Tailstock Taper, Tailstock Quill Travel: 110mm, Cross Slide Travel: 175mm, Compound Rest Travel: 100mm

This is New Machine - The recommended list price for this item is £10,760

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with a forklift onto a lorry, Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate G-330ES High Speed Precision Centre Lathe with Fagor 20iT D.R.O, Bison Chuck & Multifix Toolpost, 330mm Swing over Bed, 195mm Swing over Cross slide, 600mm between Centres, 190mm Bed Width, Spindle Speeds: 80 - 2,000rpm, 40mm Spindle Bore, MT5 Spindle Taper, MT3 Tailstock Taper, Tailstock Quill Travel: 110mm, Cross Slide Travel: 175mm, Compound Rest Travel: 100mm

ThiThis is New Machine - The recommended list price for this item is £10,760

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with a forklift onto a lorry, Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate G-305EB Precision Geared Head Bench Lathe with Fagor 20iT D.R.O, Bison Chuck, 305mm Swing over Bed, 153mm Swing over Saddle, 610mm between Centres, 190mm Bed Width, 40mm Spindle Bore, MT5 Spindle Nose Taper, MT3 Tailstock Barrel Taper, 170mm Travel of Cross Slide, 90mm Travel of Top Slide, 100mm Travel of Tailstock Barrel, Spindle Speeds: 70 - 1,500rpm, Fixed & Travelling Steadies, 4-Way Toolpost, 250mm Face Plate

This is New Machine - The recommended list price for this item is £7,305

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with a forklift onto a lorry, Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate PBM-SUPER Turret Milling Machine with Fagor 20iM 2-Axis D.R.O, Variable Speed Head, ISO-40 Taper, 5HP Motore, Gear type X Axis Power feed, Power Rise & Fall, Interlocked Spindle Guard, Coolant Equipment, Working Surface: 1372 x 300mm, Manual Travels: 862 x 400 x 406mm, Auto Travels: 787 x 400 x 406mm, Spindle Speeds: 60 - 3,600rpm, Spindle Nose to Table: 30 - 520mm, Overarm Travel: 500mm, Quill Travel: 127mm

This is New Machine - The recommended list price for this item is £15,675

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet.

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate PBM-2000 Turret Milling Machine with Fagor 20iM D.R.O, Working Surface: 1067 x 230mm, Manual Travels: 736 x 305 x 406mm, Auto Travels: 660 x 305 x 406mm, R8 Spindle Nose, Spindle Speeds: 60 - 4,200rpm, 3HP Motor, Spindle Nose to Table: 65/47mm (min/max), Spindle Centre to Column: 100/470mm, Overarm Travel: 370mm, Quill Travel: 127mm, 2 Axis Digital Readout and Fibreglass Splash tray included.

This is New Machine - The recommended list price for this item is £11,245

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet.

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate PBM-2000 Turret Milling Machine with Fagor 20iM 2-Axis D.R.O, Working Surface: 1067 x 230mm, Manual Travels: 736 x 305 x 406mm, Auto Travels: 660 x 305 x 406mm, R8 Spindle Nose, Spindle Speeds: 60 - 4,200rpm, 3HP Motor, Spindle Nose to Table: 65/47mm (min/max), Spindle Centre to Column: 100/470mm, Overarm Travel: 370mm, Quill Travel: 127mm. 2 Axis Digital Readout and Fibreglass Splash tray included.

This is New Machine - The recommended list price for this item is £11,245

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate PBM-1000 Turret Milling Machine with Fagor 20iM 2-Axis D.R.O, Working Surface: 1067 x 230mm, Manual Travels: 736 x 305 x 406mm, Auto Travels: 660 x 305 x 406mm, R8 Spindle Nose, Spindle Speeds: 60 - 4,200rpm, 3HP Motor, Spindle Nose to Table: 65/47mm (min/max), Spindle Centre to Column: 100/470mm (min/max), Overarm Travel: 370mm, Quill Travel: 127mm. 2 Axis Digital Readout and Fibreglass Splash tray included.

This is New Machine - The recommended list price for this item is £10,115

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate PBM-1000 Turret Milling Machine with Fagor 20iM 2-Axis D.R.O, Working Surface: 1067 x 230mm, Manual Travels: 736 x 305 x 406mm, Auto Travels: 660 x 305 x 406mm, R8 Spindle Nose, Spindle Speeds: 60 - 4,200rpm, 3HP Motor, Spindle Nose to Table: 65/47mm (min/max), Spindle Centre to Column: 100/470mm (min/max), Overarm Travel: 370mm, Quill Travel: 127mm. 2 Axis Digital Readout and Fibreglass Splash tray included.

This is New Machine - The recommended list price for this item is £10,115

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet.

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate PBM-1000 Turret Milling Machine with Newall DP500 2-Axis D.R.O, Working Surface: 1067 x 230mm, Manual Travels: 736 x 305 x 406mm, Auto Travels: 660 x 305 x 406mm, R8 Spindle Nose, Spindle Speeds: 60 - 4,200rpm, 3HP Motor, Spindle Nose to Table: 65/47mm (min/max), Spindle Centre to Column: 100/470mm (min/max), Overarm Travel: 370mm, Quill Travel: 127mm

This is New Machine - The recommended list price for this item is £10,115

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet. 

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Progress PR-4RD Radial Arm Drill, Spindle Stroke: 250mm, MT4 Taper, Spindle Speeds: 44 - 1,500rpm, 300mm Column Diameter, 810mm Horizontal Travel of Headstock, 290 - 1210mm Distance - Base to Spindle, Drilling Capacities - Steel: 50mm, Cast Iron: 55mm, Tapping Capacities - Steel: 30mm, Cast Iron: 38mm, Boring Capacities - Steel: 85mm, Cast Iron: 120mm

This is New Machine - The recommended list price for this item is £16,940

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty. UK - Parts and labour - Outside UK Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Progress PR-4SGF Geared Head Drill with Downfeed, Steel Drilling Capacity: 36mm, 2HP Motor, Max. Spindle Nose to Column: 350mm, Swing: 700mm, 950 - 1300mm Spindle nose to Table, MT4 Spindle Taper, Manual Spindle Travel: 150mm, P/F: 107mm, Quill Diameter: 62mm, Column Diameter: 120mm, Spindle Speeds: 75 - 3,140rpm, Working Table: 405 x 505mm, (2) T-Slots - Size: 16 x 26mm

This is New Machine - The recommended list price for this item is £3,770

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Progress PR-3SG Geared Head Drill, Steel Drilling Capacity: 32mm, 2HP Motor, Max. Spindle Nose to Column: 350mm, Swing: 700mm, 950 - 1300mm Spindle nose to Table, MT3 Spindle Taper, Spindle Travel: 150mm, Quill Diameter: 62mm, Column Diameter: 120mm, Spindle Speeds: 75 - 3,140rpm, Working Table: 405 x 505mm, (2) T-Slots - Size: 16 x 26mm, Longitudinal Travel: 400mm, Cross Travel: 240mm

This is New Machine - The recommended list price for this item is £3,130

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Progress PR-2SG Geared Head Drill, Steel Drilling Capacity: 32mm, Steel Tapping Capacity: 12.7mm, 1.5HP Motor, Max. Spindle Nose to Column: 284mm, Swing: 568mm, 915 - 1262mm Spindle nose to Table, MT3 Spindle Taper, Spindle Travel: 150mm, Quill Diameter: 62mm, Column Diameter: 100mm, Spindle Speeds: 75 - 3,140rpm, Working Table: 405 x 505mm, (2) T-Slots - Size: 16 x 26mm, Longitudinal Travel: 380mm, Cross Travel: 140mm

This is New Machine - The recommended list price for this item is £2,740

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Progress PR-3VSF Variable Speed Pedestal Drill with Downfeed, 2-Speed 2HP Motor, MT3 Spindle Taper, 165mm Manural Spindle Stroke, 107mm Powerfeed Spindle Stroke, 490mm Swing, Square Table: 540 x 470mm, 115mm Column Diameter, Cast Iron Capacities - Drilling: 32mm, Face Mill: 76mm, End Mill: 20mm, Tapping: 16mm, Mild Steel Capacity: 32mm, Light Alloy Capacities: 32mm

This is New Machine - The recommended list price for this item is £3,560

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Progress PR-2VS Variable Speed Pedestal Drill, 1.2kW DC Motor, Variable Spindle Speed: 160 - 2,000rpm,MT3 Spindle Taper, 120mm Spindle Travel, 500mm Swing, Quill Diameter: 55mm, Column Diameter: 115mm, Table Work Surface: 420 x 470mm, Spindle Nose to Table: 670mm, Spindle Nose to Base: 1225mm, (2) 16 x 26mm T-Slots, Mild Steel Capacities - Tapping: 12mm, Drilling: 28mm

This is New Machine - The recommended list price for this item is £2,325

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Progress PR-2VS Variable Speed Pedestal Drill, 1.2kW DC Motor, Variable Spindle Speed: 160 - 2,000rpm,MT3 Spindle Taper, 120mm Spindle Travel, 500mm Swing, Quill Diameter: 55mm, Column Diameter: 115mm, Table Work Surface: 420 x 470mm, Spindle Nose to Table: 670mm, Spindle Nose to Base: 1225mm, (2) 16 x 26mm T-Slots, Mild Steel Capacities - Tapping: 12mm, Drilling: 28mm

This is New Machine - The recommended list price for this item is £2,325

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Progress PR-1VS Variable Speed Bench Drill

This is New Machine - The recommended list price for this item is £1,650

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Progress PR-1VS Variable Speed Bench Drill

This is New Machine - The recommended list price for this item is £1,650

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Progress PR-1VS Variable Speed Bench Drill

This is New Machine - The recommended list price for this item is £1,650

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Progress PR-1VS Variable Speed Bench Drill

This is New Machine - The recommended list price for this item is £1,650

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Profitdrill PD-2P Pedestal Drill, Max. Drilling Capacity: 25mm dia, MT3 Spindle Taper, Spindle Travel: 90mm, Working Diameter: 370mm, Spindle Speeds: 230 - 2,350rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 700mm, Spindle Base: 1250mm, 1HP Motor

This is New Machine - The recommended list price for this item is £1,605

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Profitdrill PD-2P Pedestal Drill, Max. Drilling Capacity: 25mm dia, MT3 Spindle Taper, Spindle Travel: 90mm, Working Diameter: 370mm, Spindle Speeds: 230 - 2,350rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 700mm, Spindle Base: 1250mm, 1HP Motor

This is New Machine - The recommended list price for this item is £1,605

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Profitdrill PD-2P Pedestal Drill, Max. Drilling Capacity: 25mm dia, MT3 Spindle Taper, Spindle Travel: 90mm, Working Diameter: 370mm, Spindle Speeds: 230 - 2,350rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 700mm, Spindle Base: 1250mm, 1HP Motor

This is New Machine - The recommended list price for this item is £1,605

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Profitdrill PD-1P Pedestal Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 720mm, Spindle Base: 1250mm, 1/2 HP Motor

This is New Machine - The recommended list price for this item is £1,445

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Profitdrill PD-1P Pedestal Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 720mm, Spindle Base: 1250mm, 1/2 HP Motor

This is New Machine - The recommended list price for this item is £1,445

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Profitdrill PD-1P Pedestal Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 720mm, Spindle Base: 1250mm, 1/2 HP Motor

This is New Machine - The recommended list price for this item is £1,445

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Profitdrill PD-1P Pedestal Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 720mm, Spindle Base: 1250mm, 1/2 HP Motor

This is New Machine - The recommended list price for this item is £1,445

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Profitdrill PD-1B Bench Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 420mm, Spindle Base: 650mm, 1/2 HP Motor

This is New Machine - The recommended list price for this item is £1,250

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Profitdrill PD-1B Bench Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 420mm, Spindle Base: 650mm, 1/2 HP Motor

This is New Machine - The recommended list price for this item is £1,250

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Profitdrill PD-1B Bench Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 420mm, Spindle Base: 650mm, 1/2 HP Motor

This is New Machine - The recommended list price for this item is £1,250

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Profitdrill PD-1B Bench Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 420mm, Spindle Base: 650mm, 1/2 HP Motor

This is New Machine - The recommended list price for this item is £1,250

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Profitdrill PD-1B Bench Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 420mm, Spindle Base: 650mm, 1/2 HP Motor

This is New Machine - The recommended list price for this item is £1,250

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate Profitdrill PD-1B Bench Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 420mm, Spindle Base: 650mm, 1/2 HP Motor

This is New Machine - The recommended list price for this item is £1,250

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate VBS-400 Vertical Bandsaw with Power Table Feed, Max. Throat Capacity: 396mm, Max. Thickness: 255mm, Wheel Diameter: 408mm, 2HP Motor, 300mm Table Stroke, Table Size: 550 x 600mm, Table Height: 1000mm, Max. Blade Length: 3140mm, Width: 16mm, Butt Welder Capacity: 16mm

This is Ex. Showroom/Demonstration Machine - The recommended list price for this item is £6,850

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate VBS-350 Vertical Bandsaw with Power Table Feed, Max. Throat Capacity: 356mm, Max. Thickness: 205mm, Wheel Diameter: 368mm, 1HP Motor, 300mm Table Stroke, Table Size: 550 x 600mm, Table Height: 990mm, Max. Blade Length: 2900mm, Width: 13mm, Butt Welder Capacity: 13mm

This is New Machine - The recommended list price for this item is £5,850

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate PR-10V Horizontal Bandsaw, 2HP Motor, Variable Saw Blade Speed, Blade Size: 27 x 0.9 x 3099mm

This is New Machine - The recommended list price for this item is £3,450

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate PR-7B Horizontal Bandsaw, 3/4 HP, Stepped Pulley Speed Change, Swivel Vice, Hydraulic Downfeed & Coolant

This is New Machine - The recommended list price for this item is £1,096

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Gate PR-7B Horizontal Bandsaw, 3/4 HP, Stepped Pulley Speed Change, Swivel Vice, Hydraulic Downfeed & Coolant

This is New Machine - The recommended list price for this item is £1,096

Please Note: This Item is located in Watford, UK

A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.

With the purchase of this machine you would be entitled to 12 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen BSS 8200 Belt Grinder, Single Phase, 230V,800W, Speeds: 2,800- 3,400rpm, Grinding Wheel: 200 x 25 x 15mm

This is New Machine - The recommended list price for this item is £805.19

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item. 

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen BSS 8200 Belt Grinder, Three Phase, 400V, 850W, Speeds: 2,800- 3,400rpm, Grinding Wheel: 200 x 25 x 15mm

This is New Machine - The recommended list price for this item is £805.19

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen K-8000 Pedestal

This is New Machine  - The recommended list price for this item is £263.20

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen K-8000 Pedestal

This is New Machine - The recommended list price for this item is £263.20

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen DS 9200 3-Phase Double Ended Grinder, 400/230v, 1100W, Speeds: 2800 - 3400rpm, Grinding Wheel: 200 x 25 x 20mm

This is New Machine - The recommended list price for this item is £796.54

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen DS 9250 3-Phase Double Ended Grinder, 400/230v, 1500W, Speeds: 2800 - 3400rpm, Grinding Wheel: 250 x 30 x 20mm

This is New Machine - The recommended list price for this item is £1009.52

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen DS 9250 3-Phase Double Ended Grinder, 400/230v, 1500W, Speeds: 2800 - 3400rpm, Grinding Wheel: 250 x 30 x 20mm

This is New Machine - The recommended list price for this item is £1009.52

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen DS 9250 3-Phase Double Ended Grinder, 400/230v, 1500W, Speeds: 2800 - 3400rpm, Grinding Wheel: 250 x 30 x 20mm

This is New Machine - The recommended list price for this item is £1009.52

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen DS 9300 3-Phase Double Ended Grinder, 400/230v, 1700W, Speeds: 1400 - 1700rpm, Grinding Wheel: 300 x 40 x 20mm

This is New Machine - The recommended list price for this item is £1229.44

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen DS 9300 3-Phase Double Ended Grinder, 400/230v, 1700W, Speeds: 1400 - 1700rpm, Grinding Wheel: 300 x 40 x 20mm

This is New Machine - The recommended list price for this item is £1229.44

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen DPC 9300 Double Ended Polishing Machine, 3-Phase, 400/230V, 1700W, Speed: 1400 - 1700rpm, Polishing Wheel: 300 x 30 x 20mm

This is New Machine - The recommended list price for this item is £1056.28

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen BSS 9200 Belt Linisher/Grinder, 3-Phase, 400/230V, 1100W, Speeds; 2800 - 3400rpm, Grinding Wheel: 200 x 25 x 20mm, Belt Size: 1300 x 75mm

This is New Machine - The recommended list price for this item is £1220.78

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen BSS 9250 Belt Linisher/Grinder, 3-Phase, 400/230V, 1500W, Speeds; 2800 - 3400rpm, Grinding Wheel: 250 x 30 x 20mm, Belt Size: 1300 x 75mm

This is New Machine - The recommended list price for this item is £1362.77

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen K-9000 Pedestal

This is New Machine - The recommended list price for this item is £346.32

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen K-9000 Pedestal

This is New Machine - The recommended list price for this item is £346.32

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen K-9000 Pedestal

This is New Machine - The recommended list price for this item is £346.32

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.

Creusen K-9000 Pedestal

This is New Machine - The recommended list price for this item is £346.32

Please Note: This Item is located in Watford, UK

Manual handling, preparation and loading onto suitable vehicle charge of £20 will be automatically added to your invoice should you be successful in purchasing this item.

With the purchase of this machine you would be entitled to 6 months warranty, Parts only.

Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details.