2823 - Hurco Vertical Machining Centres, Sodick & Agie EDM'S, Toolroom Equipment and Ancillaries no longer required due to Investment in New Equipment by The Goodfish Group, Cannock

Engineering

Auction ends on

Wednesday 16 Oct 2019 at 03:00PM (BST)
Add to calendar

Time left

Overtime bidding

Auction description

Location: These lots are located in Cannock.  Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lot 107A however is located in Birmingham.

Buyer's premium

Buyer's Premium will be charged at 16%.

VAT

Value added tax will be charged at 20%.

Viewing times

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

18 Oct 2019 at 17:00 (BST)

Final clearance date

31 Oct 2019 at 17:00 (GMT)

Shipping agents

Storage contractors

Lots 11-20 of 81

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
16 Oct 2019 17:10:00 BST
Time left:
Bidding ended
Increment:
£100
Bids:
22
Buyer's premium:
16%
VAT rate:
20%

Lot 106: Agie Mondo Star 20 Die Sinking Machine

Agie Mondo Star 20 Die Sinking Machine with Agie Futura V Control, 3R Tooling, 300mm x 400mm Table Size, 350mm x 150mm Magnetic Chuck. S/No. M20 STAR – 003391

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
16 Oct 2019 16:10:00 BST
Time left:
Bidding ended
Increment:
£100
Bids:
11
Buyer's premium:
16%
VAT rate:
20%

Lot 107: Agie Mondo Star 20 Die Sinking Machine

Agie Mondo Star 20 Die Sinking Machine with Agie Futura V Control, 3R Tooling, 300mm x 400mm Table Size, 350mm x 150mm Magnetic Chuck. S/No. M20 STAR – 003390

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
16 Oct 2019 16:20:00 BST
Time left:
Bidding ended
Increment:
£50
Bids:
10
Buyer's premium:
16%
VAT rate:
20%

Lot 107A: Sodick AP3 Model FS-SAP3 Spark Eroder

Sodick AP3 Model FS-SAP3 Spark Eroder with Fine Sodick Mark X EDM Control, Table Size: 600mm x 300mm, Tank Size: 700mm x 500mm x 320mm depth, Homemade Plate: 400mm x 250mm, 3R System. S/No. SAP3 207 (1991)

Please Note: This Machine is not in working order, sold as is for spares and repairs

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

 

 

Preview image
Ends:
16 Oct 2019 15:50:00 BST
Time left:
Bidding ended
Increment:
£100
Bids:
22
Buyer's premium:
16%
VAT rate:
20%

Lot 108: Sodick KLC Small Hole Drilling EDM

Sodick KLC Small Hole Drilling EDM with Table Size 350mm x 250mm, X ACT SD52 DRO. Plant No. 0142

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
16 Oct 2019 15:30:00 BST
Time left:
Bidding ended
Increment:
£100
Bids:
13
Buyer's premium:
16%
VAT rate:
20%

Lot 109: XYZ 1500 Turret Mill

XYZ 1500 Turret Mill with Newall DRO 42’’ x 9’’ Table, 6’’ Machine Vice, Power Cross Feed. S/No. 9919. (2003)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
16 Oct 2019 15:30:00 BST
Time left:
Bidding ended
Increment:
£100
Bids:
41
Buyer's premium:
16%
VAT rate:
20%

Lot 110: Jones & Shipman 1400 Surface Grinder

Jones & Shipman 1400 Surface Grinder with Opti Dress and Extraction Mag Chuck 2ft x 8’’. S/No. BO 17369

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
16 Oct 2019 15:50:00 BST
Time left:
Bidding ended
Increment:
£50
Bids:
23
Buyer's premium:
16%
VAT rate:
20%

Lot 111: Kitchen & Walker 4ft Radial Drill

Kitchen & Walker 4ft Radial Drill with Swinging Box Table 2ft x 20’’ x 22’’. S/No. TAB1200/602

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
16 Oct 2019 15:30:00 BST
Time left:
Bidding ended
Increment:
£25
Bids:
11
Buyer's premium:
16%
VAT rate:
20%

Lot 112: Alexander 2CG Tool Cutter Grinder

Alexander 2CG Tool Cutter Grinder with Collets. S/No. 2938N

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
16 Oct 2019 15:10:00 BST
Time left:
Bidding ended
Increment:
£25
Bids:
8
Buyer's premium:
16%
VAT rate:
20%

Lot 113: Model UE-250A Horizontal Band Saw

Model UE-250A Horizontal Band Saw 10’’ with Blade 27mm x 0.9mm x 3300mm. S/No. 03053903 (2003)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Ends:
16 Oct 2019 15:00:00 BST
Time left:
Bidding ended
Increment:
£25
Bids:
9
Buyer's premium:
16%
VAT rate:
20%

Lot 114: 3 Ton A-Frame Mobile Crane

3 Ton A-Frame Mobile Crane with Electric Hoist, 2.9m x 1.5m x 3.7m. Plant No. 0306

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Categories